kernel/linux.git/net/can, branch v6.18.40

can: bcm: add missing rcu list annotations and operations

2026-07-24T14:17:07+00:00

commit 7b2c3eabc4dafc062a25e10711154f2107526a78 upstream. sashiko-bot remarked the missing use of list_add_rcu() in bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure when bcm_proc_show() traverses the bcm_op's under rcu_read_lock(). To cover all initial settings of the bcm_op's the list_add_rcu() calls are moved to the end of the setup code. While at it, also fix the mirroring removal side: bcm_release() called bcm_remove_op() - which frees the op via call_rcu() - on ops that were still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first. Unlink each op with list_del_rcu() before handing it to bcm_remove_op(), matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op(). Reported-by: sashiko-reviews@lists.linux.dev Closes: https://lore.kernel.org/linux-can/20260610094654.A1FFE1F00893@smtp.kernel.org/ Fixes: dac5e6249159 ("can: bcm: add missing rcu read protection for procfs content") Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-5-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure

2026-07-24T14:17:07+00:00

commit d9b091d9d22fee81ec53fb55d2032951993ceadb upstream. bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silently turning a socket bound to a specific CAN interface into one that also matches "any" interface. Keep the lockless bo->bound check purely as a fast-path reject, and move the ifindex read (and a bo->bound re-check) into the locked section, where every writer already serializes. This removes the possibility of observing the two fields torn against each other, rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs on two independently updated fields. Annotate the now-purely-lockless bo->bound accesses consistently across all its write sites. Also fix bcm_rx_setup() silently returning success when the target device disappears concurrently instead of reporting -ENODEV, so a broken RX op is no longer left registered as if it had succeeded. Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Reported-by: Ginger Closes: https://lore.kernel.org/linux-can/CAGp+u1aBK8QVjsvAxM2Ldzep4rEbsP9x_pV3At4g=h1kVEtyhA@mail.gmail.com/ Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-2-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF

2026-07-24T14:17:07+00:00

commit 68973f9db76144825e4f35dfdc80fb8279eb2d57 upstream. Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op() with call_rcu() and introduced the RX_NO_AUTOTIMER flag. However, this flag check was omitted for thrtimer in the packet rx fast-path. During BCM RX operation teardown, a concurrent RCU reader (bcm_rx_handler) can race and re-arm thrtimer via bcm_rx_update_and_send() after call_rcu() has been scheduled. Once the RCU grace period elapses, bcm_op is freed. The subsequently firing thrtimer then dereferences the deallocated op, causing a UAF. Adding flag checks to the rx fast-path (bcm_rx_update_and_send) does not fully close the TOCTOU race and introduces latency for every CAN frame. Conversely, calling hrtimer_cancel() directly inside the RCU callback (softirq context) is fatal as hrtimer_cancel() can sleep, triggering a "scheduling while atomic" panic. Resolve this by deferring the timer cancellation and memory free to a dedicated unbound workqueue (bcm_wq). The RCU callback now queues a work item to bcm_wq, which safely cancels both timers and deallocates memory in sleepable process context. A dedicated workqueue is used to prevent system-wide WQ saturation and is cleanly flushed/destroyed on module unload to avoid rmmod page faults. Since the deferred work can now outlive the calling context by an unbounded amount, also take a reference on op->sk when it is assigned and drop it only once the deferred work has cancelled both timers, so a socket can no longer be freed out from under a still-armed timer whose callback (bcm_send_to_user()) dereferences op->sk. Fixes: f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly synchronize_rcu()") Tested-by: Feng Xue Tested-by: Oliver Hartkopp Signed-off-by: Lee Jones Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-1-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: isotp: serialize TX state transitions under so->rx_lock

2026-07-24T14:17:07+00:00

commit cf070fe33bfbd1a4c21236078fadb35dd223a157 upstream. The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state unconditionally. isotp_release() claims the socket the same way, so a racing sendmsg() sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending. Only the hrtimer callbacks stay outside so->rx_lock, since they run under so->rx_lock's cancellation elsewhere and taking it themselves would deadlock. so->tx_gen lets them recognize whether the transfer they timed out is still the one currently active, so they don't report an error against a transfer that has since completed or been superseded. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/linux-can/20260710142146.BDAE61F000E9@smtp.kernel.org/ Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260712-isotp-fixes-v10-3-793a1b1ce17f@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER

2026-07-24T14:17:07+00:00

commit 20bab8b88baac140ca3701116e1d486c7f51e311 upstream. isotp_release() looked up the bound network device via dev_get_by_index() using the stored ifindex. During device unregistration the device is unlisted from the ifindex hash before the NETDEV_UNREGISTER notifier chain runs, so a concurrent isotp_release() could find no device, skip can_rx_unregister() entirely, and still proceed to free the socket. Since isotp_release() had already removed itself from the isotp notifier list at that point, isotp_notify() would never get a chance to clean up either, leaving a stale CAN filter that keeps pointing at the freed socket. Fix this the same way raw.c already does: hold a tracked reference to the bound net_device in the socket (so->dev/so->dev_tracker) from bind() onward instead of re-resolving it from the ifindex, and serialize bind()/release() with rtnl_lock() so that so->dev is always consistent with what the NETDEV_UNREGISTER notifier sees. so->dev stays valid regardless of ifindex-hash unlisting, and is only ever cleared by whichever of isotp_release()/isotp_notify() gets there first, so the filter is always removed exactly once. isotp_bind() now rejects a (re)bind with -EAGAIN while so->[tx|rx].state isn't ISOTP_IDLE yet, so a timer left running by a prior NETDEV_UNREGISTER can't act on a newly bound so->ifindex. Both checks share the same lock_sock() section, so there is no window in which a concurrent isotp_notify() clearing so->bound could be missed. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/linux-can/20260707101420.47F261F000E9@smtp.kernel.org/ Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260712-isotp-fixes-v10-2-793a1b1ce17f@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: isotp: use unconditional synchronize_rcu() in isotp_release()

2026-07-24T14:17:07+00:00

commit 9b1a02e0d980ac6b0e36a90378f847062f81d7e4 upstream. isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(), therefore make isotp_release() always call synchronize_rcu() before cancelling the timers, regardless of so->bound. This still closes the original race (isotp_notify() clearing so->bound without waiting for in-flight isotp_rcv() callers before isotp_release() cancels the RX timer) without adding any RCU wait to the netdevice notifier path. Fixes: 14a4696bc311 ("can: isotp: isotp_release(): omit unintended hrtimer restart on socket release") Closes: https://lore.kernel.org/linux-can/20260707085210.6B6C01F000E9@smtp.kernel.org/ Reported-by: Nico Yip Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260712-isotp-fixes-v10-1-793a1b1ce17f@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: raw: fix ro->uniq use-after-free in raw_rcv()

2026-04-22T11:22:25+00:00

commit a535a9217ca3f2fccedaafb2fddb4c48f27d36dc upstream. raw_release() unregisters raw CAN receive filters via can_rx_unregister(), but receiver deletion is deferred with call_rcu(). This leaves a window where raw_rcv() may still be running in an RCU read-side critical section after raw_release() frees ro->uniq, leading to a use-after-free of the percpu uniq storage. Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific socket destructor. can_rx_unregister() takes an extra reference to the socket and only drops it from the RCU callback, so freeing uniq from sk_destruct ensures the percpu area is not released until the relevant callbacks have drained. Fixes: 514ac99c64b2 ("can: fix multiple delivery of a single CAN frame for overlapping CAN filters") Cc: stable@vger.kernel.org # v4.1+ Assisted-by: Bynario AI Signed-off-by: Samuel Page Link: https://patch.msgid.link/26ec626d-cae7-4418-9782-7198864d070c@bynar.io Acked-by: Oliver Hartkopp [mkl: applied manually] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: isotp: fix tx.buf use-after-free in isotp_sendmsg()

2026-04-02T11:23:18+00:00

commit 424e95d62110cdbc8fd12b40918f37e408e35a92 upstream. isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access to so->tx.buf. isotp_release() waits for ISOTP_IDLE via wait_event_interruptible() and then calls kfree(so->tx.buf). If a signal interrupts the wait_event_interruptible() inside close() while tx.state is ISOTP_SENDING, the loop exits early and release proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf) while sendmsg may still be reading so->tx.buf for the final CAN frame in isotp_fill_dataframe(). The so->tx.buf can be allocated once when the standard tx.buf length needs to be extended. Move the kfree() of this potentially extended tx.buf to sk_destruct time when either isotp_sendmsg() and isotp_release() are done. Fixes: 96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size") Cc: stable@vger.kernel.org Reported-by: Ali Norouzi Co-developed-by: Ali Norouzi Signed-off-by: Ali Norouzi Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260319-fix-can-gw-and-can-isotp-v2-2-c45d52c6d2d8@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: gw: fix OOB heap access in cgw_csum_crc8_rel()

2026-04-02T11:23:18+00:00

commit b9c310d72783cc2f30d103eed83920a5a29c671a upstream. cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx(): int from = calc_idx(crc8->from_idx, cf->len); int to = calc_idx(crc8->to_idx, cf->len); int res = calc_idx(crc8->result_idx, cf->len); if (from < 0 || to < 0 || res < 0) return; However, the loop and the result write then use the raw s8 fields directly instead of the computed variables: for (i = crc8->from_idx; ...) /* BUG: raw negative index */ cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */ With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame, calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with i = -64, reading cf->data[-64], and the write goes to cf->data[-64]. This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the start of the canfd_frame on the heap. The companion function cgw_csum_xor_rel() uses `from`/`to`/`res` correctly throughout; fix cgw_csum_crc8_rel() to match. Confirmed with KASAN on linux-7.0-rc2: BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0 Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62 To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed. Fixes: 456a8a646b25 ("can: gw: add support for CAN FD frames") Cc: stable@vger.kernel.org Reported-by: Ali Norouzi Reviewed-by: Oliver Hartkopp Acked-by: Oliver Hartkopp Signed-off-by: Ali Norouzi Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260319-fix-can-gw-and-can-isotp-v2-1-c45d52c6d2d8@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: statistics: add missing atomic access in hot path

2026-04-02T11:23:03+00:00

[ Upstream commit 46eee1661aa9b49966e6c43d07126fe408edda57 ] Commit 80b5f90158d1 ("can: statistics: use atomic access in hot path") fixed a KCSAN issue in can_receive() but missed to convert the 'matches' variable used in can_rcv_filter(). Fixes: 80b5f90158d1 ("can: statistics: use atomic access in hot path") Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260318173413.28235-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin