kernel/linux.git/net/can, branch linux-5.9.y

can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check

2020-12-11T12:22:11+00:00

commit d73ff9b7c4eacaba0fd956d14882bcae970f8307 upstream. To detect potential bugs in CAN protocol implementations (double removal of receiver entries) a WARN() statement has been used if no matching list item was found for removal. The fault injection issued by syzkaller was able to create a situation where the closing of a socket runs simultaneously to the notifier call chain for removing the CAN network device in use. This case is very unlikely in real life but it doesn't break anything. Therefore we just replace the WARN() statement with pr_warn() to preserve the notification for the CAN protocol development. Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: af_can: prevent potential access of uninitialized member in canfd_rcv()

2020-11-24T12:39:00+00:00

[ Upstream commit 9aa9379d8f868e91719333a7f063ccccc0579acc ] In canfd_rcv(), cfd->len is uninitialized when skb->len = 0, and this uninitialized cfd->len is accessed nonetheless by pr_warn_once(). Fix this uninitialized variable access by checking cfd->len's validity condition (cfd->len > CANFD_MAX_DLEN) separately after the skb->len's condition is checked, and appropriately modify the log messages that are generated as well. In case either of the required conditions fail, the skb is freed and NET_RX_DROP is returned, same as before. Fixes: d4689846881d ("can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once") Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com Tested-by: Anant Thazhemadam Signed-off-by: Anant Thazhemadam Link: https://lore.kernel.org/r/20201103213906.24219-3-anant.thazhemadam@gmail.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: af_can: prevent potential access of uninitialized member in can_rcv()

2020-11-24T12:39:00+00:00

[ Upstream commit c8c958a58fc67f353289986850a0edf553435702 ] In can_rcv(), cfd->len is uninitialized when skb->len = 0, and this uninitialized cfd->len is accessed nonetheless by pr_warn_once(). Fix this uninitialized variable access by checking cfd->len's validity condition (cfd->len > CAN_MAX_DLEN) separately after the skb->len's condition is checked, and appropriately modify the log messages that are generated as well. In case either of the required conditions fail, the skb is freed and NET_RX_DROP is returned, same as before. Fixes: 8cb68751c115 ("can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once") Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com Tested-by: Anant Thazhemadam Signed-off-by: Anant Thazhemadam Link: https://lore.kernel.org/r/20201103213906.24219-2-anant.thazhemadam@gmail.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: proc: can_remove_proc(): silence remove_proc_entry warning

2020-11-22T09:15:32+00:00

commit 3accbfdc36130282f5ae9e6eecfdf820169fedce upstream. If can_init_proc() fail to create /proc/net/can directory, can_remove_proc() will trigger a warning: WARNING: CPU: 6 PID: 7133 at fs/proc/generic.c:672 remove_proc_entry+0x17b0 Kernel panic - not syncing: panic_on_warn set ... Fix to return early from can_remove_proc() if can proc_dir does not exists. Signed-off-by: Zhang Changzhong Link: https://lore.kernel.org/r/1594709090-3203-1-git-send-email-zhangchangzhong@huawei.com Fixes: 8e8cda6d737d ("can: initial support for network namespaces") Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: j1939: j1939_sk_bind(): return failure if netdev is down

2020-11-18T18:22:05+00:00

[ Upstream commit 08c487d8d807535f509ed80c6a10ad90e6872139 ] When a netdev down event occurs after a successful call to j1939_sk_bind(), j1939_netdev_notify() can handle it correctly. But if the netdev already in down state before calling j1939_sk_bind(), j1939_sk_release() will stay in wait_event_interruptible() blocked forever. Because in this case, j1939_netdev_notify() won't be called and j1939_tp_txtimer() won't call j1939_session_cancel() or other function to clear session for ENETDOWN error, this lead to mismatch of j1939_session_get/put() and jsk->skb_pending will never decrease to zero. To reproduce it use following commands: 1. ip link add dev vcan0 type vcan 2. j1939acd -r 100,80-120 1122334455667788 vcan0 3. presses ctrl-c and thread will be blocked forever This patch adds check for ndev->flags in j1939_sk_bind() to avoid this kind of situation and return with -ENETDOWN. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong Link: https://lore.kernel.org/r/1599460308-18770-1-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

net: j1939: j1939_session_fresh_new(): fix missing initialization of skbcnt

2020-10-29T09:10:52+00:00

[ Upstream commit 13ba4c434422837d7c8c163f9c8d854e67bf3c99 ] This patch add the initialization of skbcnt, similar to: e009f95b1543 can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcnt Let's play save and initialize this skbcnt as well. Suggested-by: Jakub Kicinski Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcnt

2020-10-29T09:10:52+00:00

[ Upstream commit e009f95b1543e26606dca2f7e6e9f0f9174538e5 ] This fixes an uninit-value warning: BUG: KMSAN: uninit-value in can_receive+0x26b/0x630 net/can/af_can.c:650 Reported-and-tested-by: syzbot+3f3837e61a48d32b495f@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: Robin van der Gracht Cc: Oleksij Rempel Cc: Pengutronix Kernel Team Cc: Oliver Hartkopp Cc: Marc Kleine-Budde Signed-off-by: Cong Wang Link: https://lore.kernel.org/r/20201008061821.24663-1-xiyou.wangcong@gmail.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

can: j1939: add rxtimer for multipacket broadcast session

2020-08-15T09:12:58+00:00

According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side the required time interval between packets of a multipacket broadcast message is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin allowing for the maximumm spacing of 200ms). For receive side a timeout will occur when a time of greater than 750 ms elapsed between two message packets when more packets were expected. So this patch fix and add rxtimer for multipacket broadcast session. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel Signed-off-by: Marc Kleine-Budde

can: j1939: abort multipacket broadcast session when timeout occurs

2020-08-15T09:12:58+00:00

If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart rxtimer, and then calls __j1939_session_cancel() to set session->state = J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call j1939_session_deactivate_activate_next() to deactivate current session, and rxtimer won't be set. But for multipacket broadcast session, __j1939_session_cancel() don't set session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be deactivate and hrtimer_start() is called to start new rxtimer again and again. So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if (!j1939_cb_is_broadcast(&session->skcb)) statement. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel Signed-off-by: Marc Kleine-Budde