kernel/linux.git/net/can/bcm.c, branch linux-4.16.y

net: delete /proc THIS_MODULE references

2018-01-16T20:01:33+00:00

/proc has been ignoring struct file_operations::owner field for 10 years. Specifically, it started with commit 786d7e1612f0b0adb6046f19b906609e4fe8b1ba ("Fix rmmod/read/write races in /proc entries"). Notice the chunk where inode->i_fop is initialized with proxy struct file_operations for regular files: - if (de->proc_fops) - inode->i_fop = de->proc_fops; + if (de->proc_fops) { + if (S_ISREG(inode->i_mode)) + inode->i_fop = &proc_reg_file_ops; + else + inode->i_fop = de->proc_fops; + } VFS stopped pinning module at this point. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller

can: bcm: check for null sk before deferencing it via the call to sock_net

2017-10-19T11:05:53+00:00

The assignment of net via call sock_net will dereference sk. This is performed before a sanity null check on sk, so there could be a potential null dereference on the sock_net call if sk is null. Fix this by assigning net after the sk null check. Also replace the sk == NULL with the more usual !sk idiom. Detected by CoverityScan CID#1431862 ("Dereference before null check") Fixes: 384317ef4187 ("can: network namespace support for CAN_BCM protocol") Signed-off-by: Colin Ian King Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

networking: introduce and use skb_put_data()

2017-06-16T15:48:37+00:00

A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

can: fix CAN BCM build with CONFIG_PROC_FS disabled

2017-04-27T07:34:13+00:00

The introduced namespace support moved the BCM variables for procfs into a per-net data structure. This leads to a build failure with disabled procfs: on x86_64: when CONFIG_PROC_FS is not enabled: ../net/can/bcm.c:1541:14: error: 'struct netns_can' has no member named 'bcmproc_dir' ../net/can/bcm.c:1601:14: error: 'struct netns_can' has no member named 'bcmproc_dir' ../net/can/bcm.c:1696:11: error: 'struct netns_can' has no member named 'bcmproc_dir' ../net/can/bcm.c:1707:15: error: 'struct netns_can' has no member named 'bcmproc_dir' http://marc.info/?l=linux-can&m=149321842526524&w=2 Reported-by: Randy Dunlap Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

can: network namespace support for CAN_BCM protocol

2017-04-25T07:04:29+00:00

The CAN_BCM protocol and its procfs entries were not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d737d). This patch adds the missing per-net functionality for the CAN BCM. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

can: initial support for network namespaces

2017-04-04T15:35:58+00:00

This patch adds initial support for network namespaces. The changes only enable support in the CAN raw, proc and af_can code. GW and BCM still have their checks that ensure that they are used only from the main namespace. The patch boils down to moving the global structures, i.e. the global filter list and their /proc stats, into a per-namespace structure and passing around the corresponding "struct net" in a lot of different places. Changes since v1: - rebased on current HEAD (2bfe01e) - fixed overlong line Signed-off-by: Mario Kicherer Signed-off-by: Marc Kleine-Budde

can: bcm: fix hrtimer/tasklet termination in bcm op removal

2017-01-30T10:05:04+00:00

When removing a bcm tx operation either a hrtimer or a tasklet might run. As the hrtimer triggers its associated tasklet and vice versa we need to take care to mutually terminate both handlers. Reported-by: Michael Josenhans Signed-off-by: Oliver Hartkopp Tested-by: Michael Josenhans Cc: linux-stable Signed-off-by: Marc Kleine-Budde

can: Fix kernel panic at security_sock_rcv_skb

2017-01-29T23:30:56+00:00

Zhang Yanmin reported crashes [1] and provided a patch adding a synchronize_rcu() call in can_rx_unregister() The main problem seems that the sockets themselves are not RCU protected. If CAN uses RCU for delivery, then sockets should be freed only after one RCU grace period. Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's ease stable backports with the following fix instead. [1] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] selinux_socket_sock_rcv_skb+0x65/0x2a0 Call Trace: [] security_sock_rcv_skb+0x4c/0x60 [] sk_filter+0x41/0x210 [] sock_queue_rcv_skb+0x53/0x3a0 [] raw_rcv+0x2a3/0x3c0 [] can_rcv_filter+0x12b/0x370 [] can_receive+0xd9/0x120 [] can_rcv+0xab/0x100 [] __netif_receive_skb_core+0xd8c/0x11f0 [] __netif_receive_skb+0x24/0xb0 [] process_backlog+0x127/0x280 [] net_rx_action+0x33b/0x4f0 [] __do_softirq+0x184/0x440 [] do_softirq_own_stack+0x1c/0x30 [] do_softirq.part.18+0x3b/0x40 [] do_softirq+0x1d/0x20 [] netif_rx_ni+0xe5/0x110 [] slcan_receive_buf+0x507/0x520 [] flush_to_ldisc+0x21c/0x230 [] process_one_work+0x24f/0x670 [] worker_thread+0x9d/0x6f0 [] ? rescuer_thread+0x480/0x480 [] kthread+0x12c/0x150 [] ret_from_fork+0x3f/0x70 Reported-by: Zhang Yanmin Signed-off-by: Eric Dumazet Acked-by: Oliver Hartkopp Signed-off-by: David S. Miller

ktime: Cleanup ktime_set() usage

2016-12-25T16:21:22+00:00

ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra

ktime: Get rid of the union

2016-12-25T16:21:22+00:00

ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra