kernel/linux.git/net/bridge, branch v6.12.94

netfilter: revalidate bridge ports

2026-06-19T11:42:25+00:00

[ Upstream commit ccb9fd4b87538ccf19ccff78ee26700526d94867 ] ebt_redirect_tg() dereferences br_port_get_rcu() return without a NULL check, causing a kernel panic when the bridge port has been removed between the original hook invocation and an NFQUEUE reinject. A mere NULL check isn't sufficient, however. As sashiko review points out userspace can not only remove the port from the bridge, it could also place the device in a different virtual device, e.g. macvlan. If this happens, we must drop the packet, there is no way for us to reinject it into the bridge path. Switch to _upper API, we don't need the bridge port structure. Also, this fix keeps another bug intact: Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTER too aggressive, which prevents certain logging features when queueing in bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the old CONFIG_BRIDGE_NETFILTER cruft is off. Fixes tag is a common ancestor, this was always broken. Fixes: f350a0a87374 ("bridge: use rx_handler_data pointer to store net_bridge_port pointer") Reported-by: Ji'an Zhou Assisted-by: Claude:claude-sonnet-4-6 Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: bridge: make ebt_snat ARP rewrite writable

2026-06-19T11:42:19+00:00

[ Upstream commit 67ba971ae02514d85818fe0c32549ab4bfa3bf49 ] The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits(). Fixes: 63137bc5882a ("netfilter: ebtables: Fixes dropping of small packets in bridge nat") Reported-by: Yiming Qian Signed-off-by: Yiming Qian Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: ebtables: fix OOB read in compat_mtw_from_user

2026-06-09T10:25:38+00:00

[ Upstream commit f438d1786d657d57790c5d138d6db3fc9fdac392 ] Luxiao Xu says: The function compat_mtw_from_user() converts ebtables extensions from 32-bit user structures to kernel native structures. However, it lacks proper validation of the user-supplied match_size/target_size. When certain extensions are processed, the kernel-side translation logic may perform memory accesses based on the extension's expected size. If the user provides a size smaller than what the extension requires, it results in an out-of-bounds read as reported by KASAN. This fix introduces a check to ensure match_size is at least as large as the extension's required compatsize. This covers matches, watchers, and targets, while maintaining compatibility with standard targets. AFAIU this is relevant for matches that need to go though match->compat_from_user() call. Those that use plain memcpy with the user-provided size are ok because the caller checks that size vs the start of the next rule entry offset (which itself is checked vs. total size copied from userspace). The ->compat_from_user() callbacks assume they can read compatsize bytes, so they need this extra check. Based on an earlier patch from Luxiao Xu. Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Luxiao Xu Signed-off-by: Ren Wei Reviewed-by: Fernando Fernandez Mancera Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin

bridge: mcast: Fix a possible use-after-free when removing a bridge port

2026-06-01T15:46:32+00:00

[ Upstream commit 4df78ff02629c7729168f0696a7a2123c389818d ] When per-VLAN multicast snooping is enabled, the bridge iterates over all the bridge ports, disables the per-port multicast context on each port and enables the per-{port, VLAN} multicast contexts instead. The reverse happens when per-VLAN multicast snooping is disabled. When global multicast snooping is enabled, the bridge iterates over all the bridge ports and enables the per-port multicast context on each port. The reverse happens when multicast snooping is disabled. The above scheme can result in a situation where both types of contexts (per-port and per-{port, VLAN}) are enabled on a single bridge port: # ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev br1 type bridge mcast_vlan_snooping 1 # ip link set dev br1 type bridge mcast_snooping 0 # ip link set dev br1 type bridge mcast_snooping 1 This is not intended and it is a problem since the commit cited below. Prior to this commit, when removing a bridge port, br_multicast_disable_port() would disable the per-port multicast context and the per-{port, VLAN} multicast contexts would get disabled when flushing VLANs. After this commit, br_multicast_disable_port() only disables the per-port multicast context if per-VLAN multicast snooping is disabled. If both types of contexts were enabled on the port when it was removed, the per-port multicast context would remain enabled when freeing the bridge port, leading to a use-after-free [1]. Fix by preventing the bridge from enabling / disabling the per-port multicast contexts when toggling global multicast snooping if per-VLAN multicast snooping is enabled. [1] ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0 [...] Call Trace: __debug_check_no_obj_freed (lib/debugobjects.c:1116) kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565) kobject_cleanup (lib/kobject.c:689) rcu_do_batch (kernel/rcu/tree.c:2617) rcu_core (kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) __irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735) irq_exit_rcu (kernel/softirq.c:752) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47)) Fixes: 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions") Reported-by: syzbot+ae231e0552fa77b26ea1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/87qznowlfs.ffs@tglx/ Reported-by: Thomas Gleixner Acked-by: Nikolay Aleksandrov Signed-off-by: Ido Schimmel Link: https://patch.msgid.link/20260517121122.188333-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: bridge: Flush multicast groups when snooping is disabled

2026-06-01T15:46:31+00:00

[ Upstream commit 68800bbf583f26f71491141e4b3c8582f9cfcbde ] When forwarding multicast packets, the bridge takes MDB into account when IGMP / MLD snooping is enabled. Currently, when snooping is disabled, the MDB is retained, even though it is not used anymore. At the same time, during the time that snooping is disabled, the IGMP / MLD control packets are obviously ignored, and after the snooping is reenabled, the administrator has to assume it is out of sync. In particular, missed join and leave messages would lead to traffic being forwarded to wrong interfaces. Keeping the MDB entries around thus serves no purpose, and just takes memory. Note also that disabling per-VLAN snooping does actually flush the relevant MDB entries. This patch flushes non-permanent MDB entries as global snooping is disabled. Signed-off-by: Petr Machata Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/5e992df1bb93b88e19c0ea5819e23b669e3dde5d.1761228273.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Stable-dep-of: 4df78ff02629 ("bridge: mcast: Fix a possible use-after-free when removing a bridge port") Signed-off-by: Sasha Levin

bridge: mrp: reject zero test interval to avoid OOM panic

2026-06-01T15:46:14+00:00

[ Upstream commit fa6e24963342de4370e3a3c9af41e38277b74cf3 ] br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied interval value from netlink without validation. When interval is 0, usecs_to_jiffies(0) yields 0, causing the delayed work (br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule itself with zero delay. This creates a tight loop on system_percpu_wq that allocates and transmits MRP test frames at maximum rate, exhausting all system memory and causing a kernel panic via OOM deadlock. The same zero-interval issue applies to br_mrp_start_in_test_parse() for interconnect test frames. Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both IFLA_BRIDGE_MRP_START_TEST_INTERVAL and IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the netlink attribute parsing layer before the value ever reaches the workqueue scheduling code. This is consistent with how other bridge subsystems (br_fdb, br_mst) enforce range constraints on netlink attributes. Fixes: 20f6a05ef635 ("bridge: mrp: Rework the MRP netlink interface") Fixes: 7ab1748e4ce6 ("bridge: mrp: Extend MRP netlink interface for configuring MRP interconnect") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Acked-by: Nikolay Aleksandrov Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260328063000.1845376-1-xmei5@asu.edu Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: bridge: use a stable FDB dst snapshot in RCU readers

2026-05-07T04:09:46+00:00

[ Upstream commit df4601653201de21b487c3e7fffd464790cab808 ] Local FDB entries can be rewritten in place by `fdb_delete_local()`, which updates `f->dst` to another port or to `NULL` while keeping the entry alive. Several bridge RCU readers inspect `f->dst`, including `br_fdb_fillbuf()` through the `brforward_read()` sysfs path. These readers currently load `f->dst` multiple times and can therefore observe inconsistent values across the check and later dereference. In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change `f->dst` after the NULL check and before the `port_no` dereference, leading to a NULL-ptr-deref. Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()` with `WRITE_ONCE()` so the readers and writer use matching access patterns. Fixes: 960b589f86c7 ("bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address") Cc: stable@kernel.org Reported-by: Yifan Wu Reported-by: Juefei Pu Co-developed-by: Yuan Tan Signed-off-by: Yuan Tan Suggested-by: Xin Liu Tested-by: Ren Wei Signed-off-by: Zhengchuan Liang Signed-off-by: Ren Wei Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/6570fabb85ecadb8baaf019efe856f407711c7b9.1776043229.git.zcliangcn@gmail.com Signed-off-by: Paolo Abeni [ kept `*idx < cb->args[2]` instead of `*idx < ctx->fdb_idx` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

bridge: br_nd_send: validate ND option lengths

2026-04-11T12:24:46+00:00

commit 850837965af15707fd3142c1cf3c5bfaf022299b upstream. br_nd_send() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address. Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Cc: stable@vger.kernel.org Reported-by: Yifan Wu Reported-by: Juefei Pu Tested-by: Ao Zhou Co-developed-by: Yuan Tan Signed-off-by: Yuan Tan Suggested-by: Xin Liu Signed-off-by: Yang Yang Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20260326034441.2037420-3-n05ec@lzu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

bridge: br_nd_send: linearize skb before parsing ND options

2026-04-11T12:24:32+00:00

[ Upstream commit a01aee7cafc575bb82f5529e8734e7052f9b16ea ] br_nd_send() parses neighbour discovery options from ns->opt[] and assumes that these options are in the linear part of request. Its callers only guarantee that the ICMPv6 header and target address are available, so the option area can still be non-linear. Parsing ns->opt[] in that case can access data past the linear buffer. Linearize request before option parsing and derive ns from the linear network header. Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Reported-by: Yifan Wu Reported-by: Juefei Pu Tested-by: Ao Zhou Co-developed-by: Yuan Tan Signed-off-by: Yuan Tan Suggested-by: Xin Liu Signed-off-by: Yang Yang Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20260326034441.2037420-2-n05ec@lzu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bridge: cfm: Fix race condition in peer_mep deletion

2026-03-25T10:08:52+00:00

[ Upstream commit 3715a00855316066cdda69d43648336367422127 ] When a peer MEP is being deleted, cancel_delayed_work_sync() is called on ccm_rx_dwork before freeing. However, br_cfm_frame_rx() runs in softirq context under rcu_read_lock (without RTNL) and can re-schedule ccm_rx_dwork via ccm_rx_timer_start() between cancel_delayed_work_sync() returning and kfree_rcu() being called. The following is a simple race scenario: cpu0 cpu1 mep_delete_implementation() cancel_delayed_work_sync(ccm_rx_dwork); br_cfm_frame_rx() // peer_mep still in hlist if (peer_mep->ccm_defect) ccm_rx_timer_start() queue_delayed_work(ccm_rx_dwork) hlist_del_rcu(&peer_mep->head); kfree_rcu(peer_mep, rcu); ccm_rx_work_expired() // on freed peer_mep To prevent this, cancel_delayed_work_sync() is replaced with disable_delayed_work_sync() in both peer MEP deletion paths, so that subsequent queue_delayed_work() calls from br_cfm_frame_rx() are silently rejected. The cc_peer_disable() helper retains cancel_delayed_work_sync() because it is also used for the CC enable/disable toggle path where the work must remain re-schedulable. Fixes: dc32cbb3dbd7 ("bridge: cfm: Kernel space implementation of CFM. CCM frame RX added.") Signed-off-by: Hyunwoo Kim Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/abBgYT5K_FI9rD1a@v4bel Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin