kernel/linux.git/net/bridge, branch v6.1.18

netfilter: ebtables: fix table blob use-after-free

2023-03-11T12:55:24+00:00

[ Upstream commit e58a171d35e32e6e8c37cfe0e8a94406732a331f ] We are not allowed to return an error at this point. Looking at the code it looks like ret is always 0 at this point, but its not. t = find_table_lock(net, repl->name, &ret, &ebt_mutex); ... this can return a valid table, with ret != 0. This bug causes update of table->private with the new blob, but then frees the blob right away in the caller. Syzbot report: BUG: KASAN: vmalloc-out-of-bounds in __ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168 Read of size 4 at addr ffffc90005425000 by task kworker/u4:4/74 Workqueue: netns cleanup_net Call Trace: kasan_report+0xbf/0x1f0 mm/kasan/report.c:517 __ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168 ebt_unregister_table+0x35/0x40 net/bridge/netfilter/ebtables.c:1372 ops_exit_list+0xb0/0x170 net/core/net_namespace.c:169 cleanup_net+0x4ee/0xb10 net/core/net_namespace.c:613 ... ip(6)tables appears to be ok (ret should be 0 at this point) but make this more obvious. Fixes: c58dd2dd443c ("netfilter: Can't fail and free after table replacement") Reported-by: syzbot+f61594de72d6705aea03@syzkaller.appspotmail.com Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: br_netfilter: disable sabotage_in hook after first suppression

2023-02-09T10:28:08+00:00

[ Upstream commit 2b272bb558f1d3a5aa95ed8a82253786fd1a48ba ] When using a xfrm interface in a bridged setup (the outgoing device is bridged), the incoming packets in the xfrm interface are only tracked in the outgoing direction. $ brctl show bridge name interfaces br_eth1 eth1 $ conntrack -L tcp 115 SYN_SENT src=192... dst=192... [UNREPLIED] ... If br_netfilter is enabled, the first (encrypted) packet is received onR eth1, conntrack hooks are called from br_netfilter emulation which allocates nf_bridge info for this skb. If the packet is for local machine, skb gets passed up the ip stack. The skb passes through ip prerouting a second time. br_netfilter ip_sabotage_in supresses the re-invocation of the hooks. After this, skb gets decrypted in xfrm layer and appears in network stack a second time (after decryption). Then, ip_sabotage_in is called again and suppresses netfilter hook invocation, even though the bridge layer never called them for the plaintext incarnation of the packet. Free the bridge info after the first suppression to avoid this. I was unable to figure out where the regression comes from, as far as i can see br_netfilter always had this problem; i did not expect that skb is looped again with different headers. Fixes: c4b0e771f906 ("netfilter: avoid using skb->nf_bridge directly") Reported-and-tested-by: Wolfgang Nothdurft Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

bridge: switchdev: Fix memory leaks when changing VLAN protocol

2022-11-15T12:38:11+00:00

The bridge driver can offload VLANs to the underlying hardware either via switchdev or the 8021q driver. When the former is used, the VLAN is marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV' private flag. To avoid the memory leaks mentioned in the cited commit, the bridge driver will try to delete a VLAN via the 8021q driver if the VLAN is not marked with the previously mentioned flag. When the VLAN protocol of the bridge changes, switchdev drivers are notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but the 8021q driver is also called to add the existing VLANs with the new protocol and delete them with the old protocol. In case the VLANs were offloaded via switchdev, the above behavior is both redundant and buggy. Redundant because the VLANs are already programmed in hardware and drivers that support VLAN protocol change (currently only mlx5) change the protocol upon the switchdev attribute notification. Buggy because the 8021q driver is called despite these VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to memory leaks [1] when the VLANs are deleted. Fix by not calling the 8021q driver for VLANs that were already programmed via switchdev. [1] unreferenced object 0xffff8881f6771200 (size 256): comm "ip", pid 446855, jiffies 4298238841 (age 55.240s) hex dump (first 32 bytes): 00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000012819ac>] vlan_vid_add+0x437/0x750 [<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920 [<000000000632b56f>] br_changelink+0x3d6/0x13f0 [<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0 [<00000000f6276baf>] rtnl_newlink+0x5f/0x90 [<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00 [<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340 [<0000000010588814>] netlink_unicast+0x438/0x710 [<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40 [<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0 [<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0 [<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0 [<00000000684f7e25>] __sys_sendmsg+0xab/0x130 [<000000004538b104>] do_syscall_64+0x3d/0x90 [<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 279737939a81 ("net: bridge: Fix VLANs memory leak") Reported-by: Vlad Buslov Tested-by: Vlad Buslov Signed-off-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20221114084509.860831-1-idosch@nvidia.com Signed-off-by: Paolo Abeni

bridge: Fix flushing of dynamic FDB entries

2022-11-03T03:47:09+00:00

The following commands should result in all the dynamic FDB entries being flushed, but instead all the non-local (non-permanent) entries are flushed: # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic # ip link set dev br0 type bridge fdb_flush # bridge fdb show brport dummy1 00:00:00:00:00:01 master br0 permanent 33:33:00:00:00:01 self permanent 01:00:5e:00:00:01 self permanent This is because br_fdb_flush() works with FDB flags and not the corresponding enumerator values. Fix by passing the FDB flag instead. After the fix: # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic # ip link set dev br0 type bridge fdb_flush # bridge fdb show brport dummy1 00:aa:bb:cc:dd:ee master br0 static 00:00:00:00:00:01 master br0 permanent 33:33:00:00:00:01 self permanent 01:00:5e:00:00:01 self permanent Fixes: 1f78ee14eeac ("net: bridge: fdb: add support for fine-grained flushing") Signed-off-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20221101185753.2120691-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski

net: bridge: assign path_cost for 2.5G and 5G link speed

2022-09-30T11:35:29+00:00

As 2.5G, 5G ethernet ports are more common and affordable, these ports are being used in LAN bridge devices. STP port_cost() is missing path_cost assignment for these link speeds, causes highest cost 100 being used. This result in lower speed port being picked when there is loop between 5G and 1G ports. Original path_cost: 10G=2, 1G=4, 100m=19, 10m=100 Adjusted path_cost: 10G=2, 5G=3, 2.5G=4, 1G=5, 100m=19, 10m=100 speed greater than 10G = 1 Signed-off-by: Steven Hsieh Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-09-22T20:02:10+00:00

drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski

netfilter: ebtables: fix memory leak when blob is malformed

2022-09-20T21:50:03+00:00

The bug fix was incomplete, it "replaced" crash with a memory leak. The old code had an assignment to "ret" embedded into the conditional, restore this. Fixes: 7997eff82828 ("netfilter: ebtables: reject blobs that don't provide all entry points") Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com Signed-off-by: Florian Westphal

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-09-08T16:38:30+00:00

drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni

netfilter: br_netfilter: Drop dst references before setting.

2022-08-31T10:12:32+00:00

The IPv6 path already drops dst in the daddr changed case, but the IPv4 path does not. This change makes the two code paths consistent. Further, it is possible that there is already a metadata_dst allocated from ingress that might already be attached to skbuff->dst while following the bridge path. If it is not released before setting a new metadata_dst, it will be leaked. This is similar to what is done in bpf_set_tunnel_key() or ip6_route_input(). It is important to note that the memory being leaked is not the dst being set in the bridge code, but rather memory allocated from some other code path that is not being freed correctly before the skb dst is overwritten. An example of the leakage fixed by this commit found using kmemleak: unreferenced object 0xffff888010112b00 (size 256): comm "softirq", pid 0, jiffies 4294762496 (age 32.012s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 80 16 f1 83 ff ff ff ff ................ e1 4e f6 82 ff ff ff ff 00 00 00 00 00 00 00 00 .N.............. backtrace: [<00000000d79567ea>] metadata_dst_alloc+0x1b/0xe0 [<00000000be113e13>] udp_tun_rx_dst+0x174/0x1f0 [<00000000a36848f4>] geneve_udp_encap_recv+0x350/0x7b0 [<00000000d4afb476>] udp_queue_rcv_one_skb+0x380/0x560 [<00000000ac064aea>] udp_unicast_rcv_skb+0x75/0x90 [<000000009a8ee8c5>] ip_protocol_deliver_rcu+0xd8/0x230 [<00000000ef4980bb>] ip_local_deliver_finish+0x7a/0xa0 [<00000000d7533c8c>] __netif_receive_skb_one_core+0x89/0xa0 [<00000000a879497d>] process_backlog+0x93/0x190 [<00000000e41ade9f>] __napi_poll+0x28/0x170 [<00000000b4c0906b>] net_rx_action+0x14f/0x2a0 [<00000000b20dd5d4>] __do_softirq+0xf4/0x305 [<000000003a7d7e15>] __irq_exit_rcu+0xc3/0x140 [<00000000968d39a2>] sysvec_apic_timer_interrupt+0x9e/0xc0 [<000000009e920794>] asm_sysvec_apic_timer_interrupt+0x16/0x20 [<000000008942add0>] native_safe_halt+0x13/0x20 Florian Westphal says: "Original code was likely fine because nothing ever did set a skb->dst entry earlier than bridge in those days." Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Harsh Modi Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-08-25T23:07:42+00:00

drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski