kernel/linux.git/net/bridge/br_multicast.c, branch linux-4.20.y

Revert "bridge: do not add port to router list when receives query with source 0.0.0.0"

2019-02-27T09:09:57+00:00

commit 278e2148c07559dd4ad8602f22366d61eb2ee7b7 upstream. This reverts commit 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by: Linus Lüssing Reported-by: Sebastian Gottschall Fixes: 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by: Hangbin Liu Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: bridge: remove ipv6 zero address check in mcast queries

2018-10-29T02:18:09+00:00

Recently a check was added which prevents marking of routers with zero source address, but for IPv6 that cannot happen as the relevant RFCs actually forbid such packets: RFC 2710 (MLDv1): "To be valid, the Query message MUST come from a link-local IPv6 Source Address, be at least 24 octets long, and have a correct MLD checksum." Same goes for RFC 3810. And also it can be seen as a requirement in ipv6_mc_check_mld_query() which is used by the bridge to validate the message before processing it. Thus any queries with :: source address won't be processed anyway. So just remove the check for zero IPv6 source address from the query processing function. Fixes: 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: do not add port to router list when receives query with source 0.0.0.0

2018-10-26T23:01:23+00:00

Based on RFC 4541, 2.1.1. IGMP Forwarding Rules The switch supporting IGMP snooping must maintain a list of multicast routers and the ports on which they are attached. This list can be constructed in any combination of the following ways: a) This list should be built by the snooping switch sending Multicast Router Solicitation messages as described in IGMP Multicast Router Discovery [MRDISC]. It may also snoop Multicast Router Advertisement messages sent by and to other nodes. b) The arrival port for IGMP Queries (sent by multicast routers) where the source address is not 0.0.0.0. We should not add the port to router list when receives query with source 0.0.0.0. Reported-by: Ying Xu Signed-off-by: Hangbin Liu Acked-by: Nikolay Aleksandrov Acked-by: Roopa Prabhu Signed-off-by: David S. Miller

bridge: mcast: Default back to multicast enabled state

2018-10-03T05:27:36+00:00

Commit 13cefad2f2c1 ("net: bridge: convert and rename mcast disabled") converted the 'multicast_disabled' field to an option bit named 'BROPT_MULTICAST_ENABLED'. While the old field was implicitly initialized to 0, the new field is not initialized, resulting in the bridge defaulting to multicast disabled state and breaking existing applications. Fix this by explicitly initializing the option. Fixes: 13cefad2f2c1 ("net: bridge: convert and rename mcast disabled") Signed-off-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

net: bridge: convert mcast options to bits

2018-09-26T17:04:23+00:00

This patch converts the rest of the mcast options to bits. It also packs the mcast options a little better by moving multicast_mld_version to an existing hole, reducing the net_bridge size by 8 bytes. Signed-off-by: Nikolay Aleksandrov Reviewed-by: Stephen Hemminger Signed-off-by: David S. Miller

net: bridge: convert and rename mcast disabled

2018-09-26T17:04:23+00:00

Convert mcast disabled to an option bit and while doing so convert the logic to check if multicast is enabled instead. That is make the logic follow the option value - if it's set then mcast is enabled and vice versa. This avoids a few confusing places where we inverted the value that's being set to follow the mcast_disabled logic. Signed-off-by: Nikolay Aleksandrov Reviewed-by: Stephen Hemminger Signed-off-by: David S. Miller

net/bridge/br_multicast: remove redundant variable "err"

2018-08-06T17:33:44+00:00

The err is not modified after initalization, So remove it and make it to be void function. Signed-off-by: zhong jiang Signed-off-by: David S. Miller

treewide: kzalloc() -> kcalloc()

2018-06-12T23:19:22+00:00

The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook

net: bridge: Send notification when host join/leaves a group

2017-11-10T04:41:40+00:00

The host can join or leave a multicast group on the brX interface, as indicated by IGMP snooping. This is tracked within the bridge multicast code. Send a notification when this happens, in the same way a notification is sent when a port of the bridge joins/leaves a group because of IGMP snooping. Signed-off-by: Andrew Lunn Acked-by: Nikolay Aleksandrov Acked-by: Florian Fainelli Signed-off-by: David S. Miller

net: bridge: Rename mglist to host_joined

2017-11-10T04:41:40+00:00

The boolean mglist indicates the host has joined a particular multicast group on the bridge interface. It is badly named, obscuring what is means. Rename it. Signed-off-by: Andrew Lunn Acked-by: Nikolay Aleksandrov Acked-by: Florian Fainelli Signed-off-by: David S. Miller