kernel/linux.git/net/bluetooth, branch v5.15.219

Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept

2026-08-27T12:28:18+00:00

commit 43a556b2fd43f2df6dded59c2e26560a27874c24 upstream. rfcomm_sock_recvmsg() completes a deferred setup by calling rfcomm_dlc_accept() without holding any RFCOMM lock: if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) { rfcomm_dlc_accept(d); return 0; } and rfcomm_dlc_accept() dereferences the session on its first line: struct sock *sk = d->session->sock->sk; Every other path that touches d->session runs under rfcomm_mutex: rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(), rfcomm_dlc_send_rpn(), and the RFCOMM thread through rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as "called under rfcomm_lock()". This call site is the only one that skips it. The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against teardown, since __rfcomm_dlc_close() returns early when it wins the test_and_clear. But rfcomm_recv_disc() forces the state first: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2. With the state already BT_CLOSED that switch does not match, the bit is never consulted, and __rfcomm_dlc_close() falls through to rfcomm_dlc_unlink(), which sets d->session = NULL. So a remote DISC on a deferred dlc clears the session while leaving RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the test_and_clear and dereferences a NULL session. No timing window is needed: once the DISC has been processed, the dereference is unconditional. Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and re-checks the session, around a __rfcomm_dlc_accept() that the two in-core callers, which already hold the mutex, keep using. Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session, opens a dlc on a channel bound with BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on the accepted socket then hits: Oops: general protection fault KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rfcomm_dlc_accept+0x54/0x350 Call Trace: rfcomm_sock_recvmsg+0x1cd/0x230 sock_recvmsg+0x166/0x1c0 __sys_recvfrom+0x20d/0x300 0x10 is the offset of sock in struct rfcomm_session. With this patch the same run completes with recv() returning 0 and no report, and lockdep stays quiet, confirming rfcomm_mutex is still taken before lock_sock on this path as it is on the thread side. Fixes: bb23c0ab8246 ("Bluetooth: Add support for deferring RFCOMM connection setup") Cc: stable@vger.kernel.org Signed-off-by: Ali Ahmet Memis Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

jiffies: Define secs_to_jiffies()

2026-08-23T12:17:30+00:00

[ Upstream commit b35108a51cf7bab58d7eace1267d7965978bcdb8 ] secs_to_jiffies() is defined in hci_event.c and cannot be reused by other call sites. Hoist it into the core code to allow conversion of the ~1150 usages of msecs_to_jiffies() that either: - use a multiplier value of 1000 or equivalently MSEC_PER_SEC, or - have timeouts that are denominated in seconds (i.e. end in 000) It's implemented as a macro to allow usage in static initializers. This will also allow conversion of yet more sites that use (sec * HZ) directly, and improve their readability. Suggested-by: Michael Kelley Signed-off-by: Easwar Hariharan Signed-off-by: Thomas Gleixner Reviewed-by: Luiz Augusto von Dentz Link: https://lore.kernel.org/all/20241030-open-coded-timeouts-v3-1-9ba123facf88@linux.microsoft.com Stable-dep-of: c2816d613f38 ("ice: wait for reset completion in ice_resume()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: 6lowpan: Fix using chan->conn as indication to no remote netdev

2026-08-19T15:14:16+00:00

[ Upstream commit d38eaf611839b85ade3dd3db309dbc8aaaaf0095 ] b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") don't reset the chan->conn to NULL anymore making the bt# netdev not be remove once the last l2cap_chan_del is removed. Instead of restoring the original behavior this remove the logic of keeping the interface after the last channel is removed because it never worked as intended and the l2cap_chan_del always detach its l2cap_conn which results in always removing the channel anyway. Fixes: b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref

2026-08-19T15:14:16+00:00

[ Upstream commit b66774b48dd98f07254951f74ea6f513efe7ff8b ] l2cap_chan_timeout() runs asynchronously and accesses chan->conn. If the connection is torn down while the timer is running or pending, chan->conn can be freed, leading to a use-after-free when the timer worker attempts to lock conn->lock: | BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 [inline] | BUG: KASAN: slab-use-after-free in atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline] | BUG: KASAN: slab-use-after-free in __mutex_trylock_fast kernel/locking/mutex.c:161 [inline] | BUG: KASAN: slab-use-after-free in mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318 | Write of size 8 at addr ffff8881298d9550 by task kworker/2:1/83 | | CPU: 2 UID: 0 PID: 83 Comm: kworker/2:1 Not tainted 7.1.0-rc6-next-20260601-dirty #6 PREEMPT(full) | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 | Workqueue: events l2cap_chan_timeout | Call Trace: | | instrument_atomic_read_write include/linux/instrumented.h:112 [inline] | atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline] | __mutex_trylock_fast kernel/locking/mutex.c:161 [inline] | mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318 | l2cap_chan_timeout+0x5d/0x1b0 net/bluetooth/l2cap_core.c:422 | process_one_work kernel/workqueue.c:3326 [inline] | process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409 | worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490 | kthread+0x346/0x430 kernel/kthread.c:436 | ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158 | ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 | | | Allocated by task 320: | l2cap_conn_add+0xa7/0x820 net/bluetooth/l2cap_core.c:7075 | l2cap_connect_cfm+0xdb/0xd70 net/bluetooth/l2cap_core.c:7452 | hci_connect_cfm include/net/bluetooth/hci_core.h:2139 [inline] | hci_remote_features_evt+0x52f/0x9f0 net/bluetooth/hci_event.c:3760 | hci_event_func net/bluetooth/hci_event.c:7796 [inline] | hci_event_packet+0x561/0xa70 net/bluetooth/hci_event.c:7847 | hci_rx_work+0x370/0x890 net/bluetooth/hci_core.c:4040 | process_one_work kernel/workqueue.c:3326 [inline] | process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409 | worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490 | kthread+0x346/0x430 kernel/kthread.c:436 | ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158 | ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 | | Freed by task 322: | hci_disconn_cfm include/net/bluetooth/hci_core.h:2154 [inline] | hci_conn_hash_flush+0x101/0x1f0 net/bluetooth/hci_conn.c:2736 | hci_dev_close_sync+0x889/0xde0 net/bluetooth/hci_sync.c:5405 | hci_dev_do_close net/bluetooth/hci_core.c:502 [inline] | hci_unregister_dev+0x1f7/0x370 net/bluetooth/hci_core.c:2679 | vhci_release+0x12a/0x180 drivers/bluetooth/hci_vhci.c:690 | __fput+0x369/0x890 fs/file_table.c:510 | task_work_run+0x160/0x1d0 kernel/task_work.c:233 | get_signal+0xf5b/0x1120 kernel/signal.c:2810 | arch_do_signal_or_restart+0x4d/0x600 arch/x86/kernel/signal.c:337 | __exit_to_user_mode_loop kernel/entry/common.c:64 [inline] | exit_to_user_mode_loop+0x85/0x510 kernel/entry/common.c:98 | do_syscall_64+0x263/0x3d0 arch/x86/entry/syscall_64.c:100 | entry_SYSCALL_64_after_hwframe+0x77/0x7f | | The buggy address belongs to the object at ffff8881298d9400 | which belongs to the cache kmalloc-512 of size 512 | The buggy address is located 336 bytes inside of | freed 512-byte region [ffff8881298d9400, ffff8881298d9600) Fix it by having chan->conn hold a reference to l2cap_conn (via l2cap_conn_get) when the channel is added to the connection, and releasing it in the channel destructor. This ensures the l2cap_conn remains alive as long as the channel exists. A new FLAG_DEL channel flag is introduced to indicate that the channel has been deleted from its connection. l2cap_chan_del() atomically sets this flag using test_and_set_bit() instead of setting chan->conn to NULL. All asynchronous workers (l2cap_chan_timeout, l2cap_ack_timeout, l2cap_monitor_timeout, l2cap_retrans_timeout) and l2cap_chan_send() check FLAG_DEL to determine whether the channel has been torn down, rather than testing chan->conn for NULL. Fixes: 8c8e620467a7 ("Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()") Cc: Cc: Siwei Zhang Cc: Luiz Augusto von Dentz Assisted-by: Gemini:gemini-3.1-pro-preview Reported-by: https://sashiko.dev/#/patchset/20260521021249.3258069-1-oss%40fourdim.xyz Change-Id: Ie9862976d25c3e6d386689cd198ebe5ab4cc5509 Signed-off-by: Marco Elver Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman Signed-off-by: Todd Kjos

Bluetooth: HIDP: validate numbered report payloads

2026-08-19T15:14:09+00:00

commit 34f53d27b81a16a02828c8fdfa4e02badc326f17 upstream. When hidp_get_raw_report() waits for a numbered report, hidp_process_data() compares the expected report number with skb->data[0]. A connected HIDP peer can reply with only a DATA transaction header, leaving the skb empty after the header is removed. KMSAN reports an uninitialized-value use in hidp_session_run(), with the value originating in __alloc_skb() through vhci_write(). The transaction header checks remove the empty-frame reports, but this report remains until the payload check is added. The comparison can also consume a peer-controlled byte beyond the declared L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made the current code accept that byte as report ID 1 and complete HIDIOCGFEATURE with a zero-byte result. With this change the malformed response is rejected with -EIO, while a subsequent valid response still succeeds. Require a payload byte before comparing a numbered report ID. Unnumbered reports continue to accept an empty payload. Fixes: 0ff1731a1ae5 ("HID: bt: Add support for hidraw HIDIOCGFEATURE and HIDIOCSFEATURE") Cc: stable@vger.kernel.org Signed-off-by: Sangho Lee Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: HIDP: reject frames without a transaction header

2026-08-19T15:14:09+00:00

commit 47778d2c2087b5d192398f6fddf692d16a5431cf upstream. hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0] before checking that the L2CAP SDU contains a transaction header. A connected HIDP peer can send an empty basic-mode SDU and make both paths use an uninitialized byte from skb tailroom. KMSAN reports the use in hidp_session_run(), with the uninitialized value originating in __alloc_skb() through vhci_write(). The control path produces two reports and the interrupt path produces one. The byte can also be controlled by a malformed lower-layer packet. If an HCI ACL packet contains an L2CAP PDU with a declared zero-length payload followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to the declared PDU length before dispatch. The current HIDP path nevertheless consumes the extra byte as HIDP_TRANS_HID_CONTROL | HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this change, the same packet is discarded and a subsequent feature report request succeeds. Pull the transaction header with skb_pull_data() and discard frames that do not contain it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Sangho Lee Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp

2026-08-19T15:14:08+00:00

[ Upstream commit c4740e7f23ff9a8210198d8b4703259e21b9f69d ] l2cap_le_connect_rsp() obtains a channel via __l2cap_get_chan_by_ident() but neither holds a reference nor uses l2cap_chan_hold_unless_zero() before locking and operating on it. A concurrent l2cap_chan_del() triggered by a remote disconnect can free the channel between the lookup and l2cap_chan_lock(), causing a use-after-free. The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero() to safely hold a reference, but l2cap_le_connect_rsp() was left unprotected. Fix by adding l2cap_chan_hold_unless_zero() after the ident lookup and l2cap_chan_put() on the exit path, consistent with other L2CAP response handlers. Fixes: f1496dee9cbd ("Bluetooth: Add initial code for LE L2CAP Connect Request") Assisted-by: Claude:deepseek-v4-pro Signed-off-by: Jiale Yao Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: RFCOMM: Fix session UAF in set_termios

2026-08-19T15:14:02+00:00

commit c783399efc22d035443f1dfbf2a09bf9562aaa5e upstream. rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and later passes the pointer to rfcomm_send_rpn(). The latter dereferences both session->initiator and session->sock. Meanwhile, krfcommd can unlink the DLC and free the session while holding rfcomm_mutex. The race can proceed as follows: TTY ioctl task krfcommd -------------- -------- load dlc->session enter rfcomm_send_rpn() lock rfcomm_mutex clear dlc->session free session unlock rfcomm_mutex read session->initiator KASAN reported: BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0 Read of size 4 at addr ffff88810012a850 by task poc/92 Call Trace: rfcomm_send_rpn+0x297/0x2a0 rfcomm_tty_set_termios+0x50d/0x850 tty_set_termios+0x596/0x950 set_termios+0x46a/0x6e0 tty_mode_ioctl+0x152/0xbd0 tty_ioctl+0x915/0x1240 __x64_sys_ioctl+0x134/0x1c0 Allocated by task 92: rfcomm_session_add+0x9e/0x2e0 rfcomm_dlc_open+0x8b1/0xe00 rfcomm_dev_activate+0x85/0x1a0 rfcomm_tty_open+0x90/0x280 Freed by task 68: kfree+0x131/0x3c0 rfcomm_session_del+0x119/0x180 rfcomm_run+0x737/0x4710 Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies that the DLC is still attached and sends the RPN frame. Have the TTY path use the helper and drop its unlocked session check. This keeps the session valid through both the frame construction and socket send. Fixes: 3a5e903c09ae ("[Bluetooth]: Implement RFCOMM remote port negotiation") Cc: stable@vger.kernel.org Signed-off-by: Chengfeng Ye Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: L2CAP: Fix regressions caused by reusing ident

2026-07-24T13:52:02+00:00

commit 761fb8ec8778f0caf2bba5a41e3cff1ea86974f3 upstream. This attempt to fix regressions caused by reusing ident which apparently is not handled well on certain stacks causing the stack to not respond to requests, so instead of simple returning the first unallocated id this stores the last used tx_ident and then attempt to use the next until all available ids are exausted and then cycle starting over to 1. Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120 Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177 Fixes: 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident") Signed-off-by: Luiz Augusto von Dentz Tested-by: Christian Eggers Signed-off-by: Greg Kroah-Hartman

Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock

2026-07-24T13:51:58+00:00

[ Upstream commit 2641a9e0a1dd4af2e21995470a21d55dd35e5203 ] l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for pending_rx_work. process_pending_rx() takes the same mutex, so teardown can deadlock against the worker it is flushing. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the l2cap_conn_ready() -> queue_work(..., &conn->pending_rx_work) submit path, the l2cap_conn_del() -> cancel_work_sync(&conn->pending_rx_work) teardown path, and the process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep reported: WARNING: possible circular locking dependency detected process_pending_rx+0x21/0x2a [vuln_msv] l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv] *** DEADLOCK *** Cancel pending_rx_work before taking conn->lock, matching the existing lock-before-drain ordering used for the two delayed works in the same teardown path. The pending_rx queue is still purged after the work has been cancelled and conn->lock has been acquired. Fixes: 7ab56c3a6ecc ("Bluetooth: Fix deadlock in l2cap_conn_del()") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman