kernel/linux.git/net/bluetooth/rfcomm, branch v6.18.48

Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept

2026-08-27T12:32:49+00:00

commit 43a556b2fd43f2df6dded59c2e26560a27874c24 upstream. rfcomm_sock_recvmsg() completes a deferred setup by calling rfcomm_dlc_accept() without holding any RFCOMM lock: if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) { rfcomm_dlc_accept(d); return 0; } and rfcomm_dlc_accept() dereferences the session on its first line: struct sock *sk = d->session->sock->sk; Every other path that touches d->session runs under rfcomm_mutex: rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(), rfcomm_dlc_send_rpn(), and the RFCOMM thread through rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as "called under rfcomm_lock()". This call site is the only one that skips it. The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against teardown, since __rfcomm_dlc_close() returns early when it wins the test_and_clear. But rfcomm_recv_disc() forces the state first: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2. With the state already BT_CLOSED that switch does not match, the bit is never consulted, and __rfcomm_dlc_close() falls through to rfcomm_dlc_unlink(), which sets d->session = NULL. So a remote DISC on a deferred dlc clears the session while leaving RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the test_and_clear and dereferences a NULL session. No timing window is needed: once the DISC has been processed, the dereference is unconditional. Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and re-checks the session, around a __rfcomm_dlc_accept() that the two in-core callers, which already hold the mutex, keep using. Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session, opens a dlc on a channel bound with BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on the accepted socket then hits: Oops: general protection fault KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rfcomm_dlc_accept+0x54/0x350 Call Trace: rfcomm_sock_recvmsg+0x1cd/0x230 sock_recvmsg+0x166/0x1c0 __sys_recvfrom+0x20d/0x300 0x10 is the offset of sock in struct rfcomm_session. With this patch the same run completes with recv() returning 0 and no report, and lockdep stays quiet, confirming rfcomm_mutex is still taken before lock_sock on this path as it is on the thread side. Fixes: bb23c0ab8246 ("Bluetooth: Add support for deferring RFCOMM connection setup") Cc: stable@vger.kernel.org Signed-off-by: Ali Ahmet Memis Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: RFCOMM: Fix session UAF in set_termios

2026-08-03T09:21:58+00:00

commit c783399efc22d035443f1dfbf2a09bf9562aaa5e upstream. rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and later passes the pointer to rfcomm_send_rpn(). The latter dereferences both session->initiator and session->sock. Meanwhile, krfcommd can unlink the DLC and free the session while holding rfcomm_mutex. The race can proceed as follows: TTY ioctl task krfcommd -------------- -------- load dlc->session enter rfcomm_send_rpn() lock rfcomm_mutex clear dlc->session free session unlock rfcomm_mutex read session->initiator KASAN reported: BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0 Read of size 4 at addr ffff88810012a850 by task poc/92 Call Trace: rfcomm_send_rpn+0x297/0x2a0 rfcomm_tty_set_termios+0x50d/0x850 tty_set_termios+0x596/0x950 set_termios+0x46a/0x6e0 tty_mode_ioctl+0x152/0xbd0 tty_ioctl+0x915/0x1240 __x64_sys_ioctl+0x134/0x1c0 Allocated by task 92: rfcomm_session_add+0x9e/0x2e0 rfcomm_dlc_open+0x8b1/0xe00 rfcomm_dev_activate+0x85/0x1a0 rfcomm_tty_open+0x90/0x280 Freed by task 68: kfree+0x131/0x3c0 rfcomm_session_del+0x119/0x180 rfcomm_run+0x737/0x4710 Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies that the DLC is still attached and sends the RPN frame. Have the TTY path use the helper and drop its unlocked session check. This keeps the session valid through both the frame construction and socket send. Fixes: 3a5e903c09ae ("[Bluetooth]: Implement RFCOMM remote port negotiation") Cc: stable@vger.kernel.org Signed-off-by: Chengfeng Ye Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: RFCOMM: validate skb length in MCC handlers

2026-06-19T11:43:53+00:00

[ Upstream commit 23882b828c3c8c51d0c946446a396b10abb3b16b ] The RFCOMM MCC handlers cast skb->data to protocol-specific structs without validating skb->len first. A malicious remote device can send truncated MCC frames and trigger out-of-bounds reads in these handlers. Fix this by using skb_pull_data() to validate and access the required data before dereferencing it. rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows 1-byte RPN requests. Handle this by validating only the DLCI byte first, and validating the full struct only when len > 1. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Muhammad Bilal Signed-off-by: SeungJu Cheon Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()

2026-06-19T11:43:53+00:00

[ Upstream commit 43c441edacf953b39517a44f5e5e10a93618b226 ] rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock, but returns the selected listener after dropping that lock without taking a reference. rfcomm_connect_ind() then locks the listener, queues a child socket on it, and may notify it after unlocking it. The buggy scenario involves two paths, with each column showing the order within that path: rfcomm_connect_ind(): listener close: 1. Find parent in 1. close() enters rfcomm_get_sock_by_channel() rfcomm_sock_release(). 2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown() without pinning parent. closes the listener. 3. Call lock_sock(parent) and 3. rfcomm_sock_kill() bt_accept_enqueue(parent, unlinks and puts parent. sk, true). 4. Read parent flags and may 4. parent can be freed. call sk_state_change(). If close wins the race, parent can be freed before rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the deferred-setup callback. Take a reference on the listener before leaving rfcomm_sk_list.lock. After lock_sock() succeeds, recheck that it is still in BT_LISTEN before queueing a child, cache the deferred-setup bit while the parent is locked, and drop the reference after the last parent use. KASAN reported a slab-use-after-free in lock_sock_nested() from rfcomm_connect_ind(), with the freeing stack going through rfcomm_sock_kill() and rfcomm_sock_release(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhang Cen Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()

2026-06-01T15:50:41+00:00

commit ab1513597c6cf17cd1ad2a21e3b045421b48e022 upstream. bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master. Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Cc: stable@vger.kernel.org Reported-by: Siwei Zhang Reviewed-by: Siwei Zhang Signed-off-by: Safa Karakuş Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: rfcomm: fix modem control handling

2025-10-24T14:32:19+00:00

The RFCOMM driver confuses the local and remote modem control signals, which specifically means that the reported DTR and RTS state will instead reflect the remote end (i.e. DSR and CTS). This issue dates back to the original driver (and a follow-on update) merged in 2002, which resulted in a non-standard implementation of TIOCMSET that allowed controlling also the TS07.10 IC and DV signals by mapping them to the RI and DCD input flags, while TIOCMGET failed to return the actual state of DTR and RTS. Note that the bogus control of input signals in tiocmset() is just dead code as those flags will have been masked out by the tty layer since 2003. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz

Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2025-07-30T15:58:55+00:00

Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...

Bluetooth: RFCOMM: Fix typos in comments

2025-07-23T14:30:32+00:00

Found by codespell. Signed-off-by: Bastien Nocera Signed-off-by: Luiz Augusto von Dentz

tty: introduce and use tty_port_tty_vhangup() helper

2025-06-17T11:42:33+00:00

This code (tty_get -> vhangup -> tty_put) is repeated on few places. Introduce a helper similar to tty_port_tty_hangup() (asynchronous) to handle even vhangup (synchronous). And use it on those places. In fact, reuse the tty_port_tty_hangup()'s code and call tty_vhangup() depending on a new bool parameter. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Karsten Keil Cc: David Lin Cc: Johan Hovold Cc: Alex Elder Cc: Oliver Neukum Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20250611100319.186924-2-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

treewide, timers: Rename from_timer() to timer_container_of()

2025-06-08T07:07:37+00:00

Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com