kernel/linux.git/net/bluetooth/iso.c, branch v6.6

Bluetooth: ISO: Fix handling of listen for unicast

2023-09-20T18:02:02+00:00

iso_listen_cis shall only return -EADDRINUSE if the listening socket has the destination set to BDADDR_ANY otherwise if the destination is set to a specific address it is for broadcast which shall be ignored. Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: Add support for periodic adv reports processing

2023-08-24T19:22:56+00:00

In the case of a Periodic Synchronized Receiver, the PA report received from a Broadcaster contains the BASE, which has information about codec and other parameters of a BIG. This isnformation is stored and the application can retrieve it using getsockopt(BT_ISO_BASE). Signed-off-by: Claudia Draghicescu Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: Use defer setup to separate PA sync and BIG sync

2023-08-24T19:21:35+00:00

This commit implements defer setup support for the Broadcast Sink scenario: By setting defer setup on a broadcast socket before calling listen, the user is able to trigger the PA sync and BIG sync procedures separately. This is useful if the user first wants to synchronize to the periodic advertising transmitted by a Broadcast Source, and trigger the BIG sync procedure later on. If defer setup is set, once a PA sync established event arrives, a new hcon is created and notified to the ISO layer. A child socket associated with the PA sync connection will be added to the accept queue of the listening socket. Once the accept call returns the fd for the PA sync child socket, the user should call read on that fd. This will trigger the BIG create sync procedure, and the PA sync socket will become a listening socket itself. When the BIG sync established event is notified to the ISO layer, the bis connections will be added to the accept queue of the PA sync parent. The user should call accept on the PA sync socket to get the final bis connections. Signed-off-by: Iulia Tanasescu Signed-off-by: Luiz Augusto von Dentz

net: annotate data-races around sk->sk_lingertime

2023-08-21T06:41:57+00:00

sk_getsockopt() runs locklessly. This means sk->sk_lingertime can be read while other threads are changing its value. Other reads also happen without socket lock being held, and must be annotated. Remove preprocessor logic using BITS_PER_LONG, compilers are smart enough to figure this by themselves. v2: fixed a clang W=1 (-Wtautological-constant-out-of-range-compare) warning (Jakub) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

Bluetooth: ISO: Fix not checking for valid CIG/CIS IDs

2023-08-11T18:53:50+00:00

Valid range of CIG/CIS are 0x00 to 0xEF, so this checks they are properly checked before attempting to use HCI_OP_LE_SET_CIG_PARAMS. Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: handle bound CIS cleanup via hci_conn

2023-08-11T18:52:32+00:00

Calling hci_conn_del in __iso_sock_close is invalid. It needs hdev->lock, but it cannot be acquired there due to lock ordering. Fix this by doing cleanup via hci_conn_drop. Return hci_conn with refcount 1 from hci_bind_cis and hci_connect_cis, so that the iso_conn always holds one reference. This also fixes refcounting when error handling. Since hci_conn_abort shall handle termination of connections in any state properly, we can handle BT_CONNECT socket state in the same way as BT_CONNECTED. Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: Add support for BT_PKT_STATUS

2023-08-11T18:49:45+00:00

This adds support for BT_PKT_STATUS socketopt by setting BT_SK_PKT_STATUS. Then upon receiving an ISO packet the code would attempt to store the Packet_Status_Flag to hci_skb_pkt_status which is then forward to userspace in the form of BT_SCM_PKT_STATUS whenever BT_PKT_STATUS has been enabled/set. Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: Notify user space about failed bis connections

2023-08-11T18:43:44+00:00

Some use cases require the user to be informed if BIG synchronization fails. This commit makes it so that even if the BIG sync established event arrives with error status, a new hconn is added for each BIS, and the iso layer is notified about the failed connections. Unsuccesful bis connections will be marked using the HCI_CONN_BIG_SYNC_FAILED flag. From the iso layer, the POLLERR event is triggered on the newly allocated bis sockets, before adding them to the accept list of the parent socket. From user space, a new fd for each failed bis connection will be obtained by calling accept. The user should check for the POLLERR event on the new socket, to determine if the connection was successful or not. The HCI_CONN_BIG_SYNC flag has been added to mark whether the BIG sync has been successfully established. This flag is checked at bis cleanup, so the HCI LE BIG Terminate Sync command is only issued if needed. The BT_SK_BIG_SYNC flag indicates if BIG create sync has been called for a listening socket, to avoid issuing the command everytime a BIGInfo advertising report is received. Signed-off-by: Iulia Tanasescu Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_sync: Fix not handling ISO_LINK in hci_abort_conn_sync

2023-08-11T18:42:43+00:00

ISO_LINK connections where not being handled properly on hci_abort_conn_sync which sometimes resulted in sending the wrong commands, or in case of having the reject command being sent by the socket code (iso.c) which is sort of a layer violation. Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Consolidate code around sk_alloc into a helper function

2023-08-11T18:36:50+00:00

This consolidates code around sk_alloc into bt_sock_alloc which does take care of common initialization. Signed-off-by: Luiz Augusto von Dentz