kernel/linux.git/net/bluetooth/bnep/core.c, branch v6.6

bluetooth: Use netif_rx().

2022-03-07T11:40:41+00:00

Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller

exit: Rename module_put_and_exit to module_put_and_kthread_exit

2021-12-13T18:04:45+00:00

Update module_put_and_exit to call kthread_exit instead of do_exit. Change the name to reflect this change in functionality. All of the users of module_put_and_exit are causing the current kthread to exit so this change makes it clear what is happening. There is no functional change. Signed-off-by: "Eric W. Biederman"

bluetooth: use eth_hw_addr_set()

2021-10-25T18:01:24+00:00

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Convert bluetooth from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Reviewed-by: Marcel Holtmann Acked-by: Marcel Holtmann Signed-off-by: Jakub Kicinski

Bluetooth: bnep: Use the correct print format

2021-06-26T05:12:40+00:00

According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye Signed-off-by: Marcel Holtmann

Bluetooth: Remove unnecessary smp_mb__{before,after}_atomic

2018-09-27T09:59:58+00:00

The barriers are unneeded; wait_woken() and woken_wake_function() already provide us with the required synchronization: remove them and document that we're relying on the (implicit) synchronization provided by wait_woken() and woken_wake_function(). Signed-off-by: Andrea Parri Reviewed-by: Brian Norris Signed-off-by: Marcel Holtmann

Bluetooth: bnep: fix possible might sleep error in bnep_session

2017-06-27T17:32:11+00:00

It looks like bnep_session has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/ Signed-off-by: Jeffy Chen Reviewed-by: Brian Norris Reviewed-by: AL Yu-Chen Cho Signed-off-by: Marcel Holtmann

net: introduce __skb_put_[zero, data, u8]

2017-06-20T17:30:14+00:00

follow Johannes Berg, semantic patch file as below, @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = __skb_put(skb, len); +p = __skb_put_zero(skb, len); | -p = (t)__skb_put(skb, len); +p = __skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ identifier p; expression len; expression skb; type t; @@ ( -t p = __skb_put(skb, len); +t p = __skb_put_zero(skb, len); ) ... when != p ( -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = __skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); | -p = (t *)__skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(__skb_put(skb, len), 0, len); +__skb_put_zero(skb, len); @@ expression skb, len, data; @@ -memcpy(__skb_put(skb, len), data, len); +__skb_put_data(skb, data, len); @@ expression SKB, C, S; typedef u8; identifier fn = {__skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Signed-off-by: yuan linyu Signed-off-by: David S. Miller

Bluetooth: Do not filter multicast addresses by default

2015-12-11T09:46:16+00:00

A Linux PC is connected with another device over Bluetooth PAN using a BNEP interface. Whenever a packet is tried to be sent over the BNEP interface, the function "bnep_net_xmit()" in "net/bluetooth/bnep/netdev.c" is called. This function calls "bnep_net_mc_filter()", which checks (if the destination address is multicast) if the address is set in a certain multicast filter (&s->mc_filter). If it is not, then it is not sent out. This filter is only changed in two other functions, found in net/bluetooth/bnep/core.c": in "bnep_ctrl_set_mc_filter()", which is only called if a message of type "BNEP_FILTER_MULTI_ADDR_SET" is received. Otherwise, it is set in "bnep_add_connection()", where it is set to a default value which only adds the broadcast address to the filter: set_bit(bnep_mc_hash(dev->broadcast), (ulong *) &s->mc_filter); To sum up, if the BNEP interface does not receive any message of type "BNEP_FILTER_MULTI_ADDR_SET", it will not send out any messages with multicast destination addresses except for broadcast. However, in the BNEP specification (page 27 in http://grouper.ieee.org/groups/802/15/Bluetooth/BNEP.pdf), it is said that per default, all multicast addresses should not be filtered, i.e. the BNEP interface should be able to send packets with any multicast destination address. It seems that the default case is wrong: the multicast filter should not block almost all multicast addresses, but should not filter out any. This leads to the problem that e.g. Neighbor Solicitation messages sent with Bluetooth PAN over the BNEP interface to a multicast destination address other than broadcast are blocked and not sent out. Therefore, in the default case, we set the mc_filter to ~0LL to not filter out any multicast addresses. Signed-off-by: Danny Schweizer Signed-off-by: Marcel Holtmann

Bluetooth: bnep: Handle BNEP connection setup request

2015-04-03T21:21:34+00:00

With this patch kernel will be able to handle setup request. This is needed if we would like to handle control mesages with extension headers. User space will be only resposible for reading setup data and checking if scenario is conformance to specification (dst and src device bnep role). In case of new user space, setup data must be leaved(peek msg) on queue. New bnep session will be responsible for handling this data. Signed-off-by: Grzegorz Kolodziejczyk Signed-off-by: Marcel Holtmann

Bluetooth: bnep: Add support to extended headers of control frames

2015-04-03T21:21:34+00:00

Handling extended headers of control frames is required BNEP functionality. This patch refractor bnep rx frame handling function. Extended header for control frames shouldn't be omitted as it was previously done. Every control frame should be checked if it contains extended header and then every extension should be parsed separately. Signed-off-by: Grzegorz Kolodziejczyk Signed-off-by: Marcel Holtmann