kernel/linux.git/net/bluetooth/Makefile, branch v6.6.132

Bluetooth: Remove BT_HS

2024-03-26T22:19:37+00:00

[ Upstream commit e7b02296fb400ee64822fbdd81a0718449066333 ] High Speed, Alternate MAC and PHY (AMP) extension, has been removed from Bluetooth Core specification on 5.3: https://www.bluetooth.com/blog/new-core-specification-v5-3-feature-enhancements/ Fixes: 244bc377591c ("Bluetooth: Add BT_HS config option") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: Add support for hci devcoredump

2023-04-24T04:57:59+00:00

Add devcoredump APIs to hci core so that drivers only have to provide the dump skbs instead of managing the synchronization and timeouts. The devcoredump APIs should be used in the following manner: - hci_devcoredump_init is called to allocate the dump. - hci_devcoredump_append is called to append any skbs with dump data OR hci_devcoredump_append_pattern is called to insert a pattern. - hci_devcoredump_complete is called when all dump packets have been sent OR hci_devcoredump_abort is called to indicate an error and cancel an ongoing dump collection. The high level APIs just prepare some skbs with the appropriate data and queue it for the dump to process. Packets part of the crashdump can be intercepted in the driver in interrupt context and forwarded directly to the devcoredump APIs. Internally, there are 5 states for the dump: idle, active, complete, abort and timeout. A devcoredump will only be in active state after it has been initialized. Once active, it accepts data to be appended, patterns to be inserted (i.e. memset) and a completion event or an abort event to generate a devcoredump. The timeout is initialized at the same time the dump is initialized (defaulting to 10s) and will be cleared either when the timeout occurs or the dump is complete or aborted. Signed-off-by: Abhishek Pandit-Subedi Signed-off-by: Manish Mandlik Reviewed-by: Abhishek Pandit-Subedi Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add BTPROTO_ISO socket type

2022-07-23T00:13:39+00:00

This introduces a new socket type BTPROTO_ISO which can be enabled with use of ISO Socket experiemental UUID, it can used to initiate/accept connections and transfer packets between userspace and kernel similarly to how BTPROTO_SCO works: Central -> uses connect with address set to destination bdaddr: > tools/isotest -s 00:AA:01:00:00:00 Peripheral -> uses listen: > tools/isotest -d Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add helper for serialized HCI command execution

2021-10-29T14:51:58+00:00

The usage of __hci_cmd_sync() within the hdev->setup() callback allows for a nice and simple serialized execution of HCI commands. More importantly it allows for result processing before issueing the next command. With the current usage of hci_req_run() it is possible to batch up commands and execute them, but it is impossible to react to their results or errors. This is an attempt to generalize the hdev->setup() handling and provide a simple way of running multiple HCI commands from a single function context. There are multiple struct work that are decdicated to certain tasks already used right now. It is add a lot of bloat to hci_dev struct and extra handling code. So it might be possible to put all of these behind a common HCI command infrastructure and just execute the HCI commands from the same work context in a serialized fashion. For example updating the white list and resolving list can be done now without having to know the list size ahead of time. Also preparing for suspend or resume shouldn't require a state machine anymore. There are other tasks that should be simplified as well. Signed-off-by: Marcel Holtmann Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann

Bluetooth: eir: Move EIR/Adv Data functions to its own file

2021-09-21T08:37:33+00:00

This moves functions manipulating EIR/Adv Data to its own file so it can be reused by other files. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann

Bluetooth: Enumerate local supported codec and cache details

2021-09-07T21:09:18+00:00

Move reading of supported local codecs into a separate init function, query codecs capabilities and cache the data Signed-off-by: Kiran K Signed-off-by: Chethan T N Signed-off-by: Srivatsa Ravishankar Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add support for reading AOSP vendor capabilities

2021-04-06T21:11:23+00:00

When drivers indicate support for AOSP vendor extension, initialize them and read its capabilities. Signed-off-by: Marcel Holtmann Signed-off-by: Luiz Augusto von Dentz

Bluetooth: implement read/set default system parameters mgmt

2020-06-12T19:41:07+00:00

This patch implements the read default system parameters and the set default system parameters mgmt commands. Signed-off-by: Alain Michaud Reviewed-by: Abhishek Pandit-Subedi Signed-off-by: Marcel Holtmann

Bluetooth: Add framework for Microsoft vendor extension

2020-04-05T11:53:05+00:00

Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman