kernel/linux.git/mm/damon, branch v7.2-rc2

Merge tag 'mm-stable-2026-06-23-08-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2026-06-23T19:03:44+00:00

Pull more MM updates from Andrew Morton: - "khugepaged: add mTHP collapse support" (Nico Pache) Provide khugepaged with the capability to collapse anonymous memory regions to mTHPs - "Remove CONFIG_READ_ONLY_THP_FOR_FS and enable file THP for writable files" (Zi Yan) Remove the READ_ONLY_THP_FOR_FS check in file_thp_enabled(), so that khugepaged and MADV_COLLAPSE can run on filesystems with PMD THP pagecache support even without READ_ONLY_THP_FOR_FS enabled - "make MM selftests more CI friendly" (Mike Rapoport) General fixes and cleanups to the MM selftests. Also move more MM selftests under the kselftest framework, making them more amenable to ongoing CI testing - "selftests/mm: fix failures and robustness improvements" and "selftests/mm: assorted fixes for hmm-tests" (Sayali Patil) Fix several issues in MM selftests which were revealed by powerpc 64k pagesize * tag 'mm-stable-2026-06-23-08-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (118 commits) Revert "mm: limit filemap_fault readahead to VMA boundaries" mm/vmscan: pass NULL to trace vmscan node reclaim mm: use mapping_mapped to simplify the code selftests/mm: fix exclusive_cow test fork() handling selftests/mm: remove hardcoded THP sizing assumptions in hmm tests selftests/mm: allow PUD-level entries in compound testcase of hmm tests mm/gup_test: reject wrapped user ranges mm/page_frag: reject invalid CPUs in page_frag_test mm/damon/core: always put unsuccessfully committed target pids mm: page_isolation: avoid unsafe folio reads while scanning compound pages mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show() selftests: mm: fix and speedup "droppable" test mm: merge writeout into pageout MAINTAINERS: add Hao Ge as reviewer for codetag and alloc_tag selftests/mm: clarify alternate unmapping in compaction_test selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported selftests/mm: ensure destination is hugetlb-backed in hugetlb-mremap selftest/mm: register existing mapping with userfaultfd in hugetlb-mremap ...

mm/damon/core: always put unsuccessfully committed target pids

2026-06-21T18:37:36+00:00

damon_commit_target() puts and gets the destination and the source target pids. It puts the destination target pid because it will be overwritten by the source target pid. It gets the source pid because the caller is supposed to eventually put the pids. In more detail, the caller will call damon_destroy_ctx() after damon_commit_ctx() to destroy the entire source context. And in this case, [f]vaddr operation set's cleanup_target() callback will put the pids. The commit operation is made at the context level. The operation can fail in multiple places including in the middle and after the targets commit operations. For any such failures, immediately the error is returned to the damon_commit_ctx() caller. If some or all of the source target pids were committed to the destination during the unsuccessful context commit attempt, those pids should be put twice. The source context will do the put operations using the above explained routine. However, let's suppose the destination context was not originally using [f]vaddr operation set and the commit failed before the ops of the source context is committed. The destination does not have the cleanup_target() ops callback, so it cannot put the pids via the damon_destroy_ctx(). As a result, the pids are leaked. The issue in the real world would be not very common. The commit feature is for changing parameters of running DAMON context while inheriting internal status like the monitoring results. The monitoring results of a physical address range ain't have things that are beneficial to be inherited to a virtual address ranges monitoring. So the problem-causing DAMON control would be not very common in the real world. That said, it is a supported feature. And damon_commit_target() failure due to memory allocation is relatively realistic [1] if there are a huge number of target regions. Fix by putting the pids in the commit operation in case of the failures. The issue was discovered [2] by Sashiko. Link: https://lore.kernel.org/20260605013849.83750-1-sj@kernel.org Link: https://lore.kernel.org/20260603112306.58490-1-akinobu.mita@gmail.com [1] Link: https://lore.kernel.org/20260320020056.835-1-sj@kernel.org [2] Fixes: 83dc7bbaecae ("mm/damon/sysfs: use damon_commit_ctx()") Signed-off-by: SeongJae Park Cc: # 6.11.x Signed-off-by: Andrew Morton

Merge tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2026-06-19T17:14:34+00:00

Pull MM updates from Andrew Morton: - "selftests/mm: clean up build output and verbosity" (Li Wang) Remove some noise from the MM selftests build - "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts) Speed up the freeing of a batch of 0-order pages by first scanning them for coalescing opportunities. This is applicable to vfree() and to the releasing of frozen pages - "mm/damon: introduce DAMOS failed region quota charge ratio" (SeongJae Park) Address a DAMOS usability issue: The DAMOS quota often exhausts prematurely because it charges for all memory attempted, causing slow and inconsistent performance when actions fail on unreclaimable memory. To fix this, a new feature lets users set a smaller, flexible quota charge ratio (via a numerator and denominator) for failed regions. Since failed actions cause less overhead, reducing their quota cost ensures more predictable and efficient DAMOS processing - "selftests/cgroup: improve zswap tests robustness and support large page sizes" (Li Wang) Fix various spurious failures and improves the overall robustness of the cgroup zswap selftests - "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga) Fix an issue in the mlock selftests on arm32 - "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao) Some maintenance work in the huge_memory code - "treewide: fixup gfp_t printks" (Brendan Jackman) Use the special vprintf() gfp_t conversion in various places - "mm: Fix vmemmap optimization accounting and initialization" (Muchun Song) Fix several bugs in the vmemmap optimization, mainly around incorrect page accounting and memmap initialization in the DAX and memory hotplug paths. It also fixes pageblock migratetype initialization and struct page initialization for ZONE_DEVICE compound pages - "mm/damon: repost non-hotfix reviewed patches in damon/next tree" A sprinkle of unrelated minor bugfixes for DAMON - "mm: remove page_mapped()" (David Hildenbrand) Remove this function from the tree, replacing it with folio_mapped() - "mm/damon: let DAMON be paused and resumed" (SeongJae Park) Allow DAMON to be paused and resumed without losing its current state - "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad Usama Anjum) Simplify and speed up kasan by removing its ineffective tagging of stacks and page tables - "mm/damon/reclaim,lru_sort: monitor all system rams by default" (SeongJae Park) Simplify deployment on diverse hardware like NUMA systems by updating DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the physical address range covering all System RAM areas by default, replacing the overly restrictive behavior that only targeted the single largest memory block to save on negligible overhead - "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae Park) Update some DAMON docs - "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin) Switch zone->lock handling over to using the guard() mechanisms - "mm/filemap: tighten mmap_miss hit accounting" (fujunjie) Fix a flaw where the mmap_miss counter over-credited page cache hits during fault-arounds and page-fault retries. This results in significant reduction of redundant synchronous mmap readahead I/O, drastically cutting down execution time and gigabytes read for sparse random or strided memory access workloads - "selftests/cgroup: Fix false positive failures in test_percpu_basic" (Li Wang) Fix a couple of false-positives in the cgroup kmem selftests - "mm/damon/reclaim: support monitoring intervals auto-tuning" (SeongJae Park) Add a new parameter to DAMON permitting DAMON_RECLAIM to automatically tune DAMON's sampling and aggregation intervals - "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park) Change DAMON_STAT to provide the pid of its kdamond - "mm/kmemleak: dedupe verbose scan output" (Breno Leitao) Remove large amounts of duplicated backtraces from the verbose-mode kmemleak output - "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David Hildenbrand) Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to removing it entirely in a later series - "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan) Prevent users from passing a non-power-of-2 value of `addr_unit', as this later results in undesirable behavior - "mm: document read_pages and simplify usage" (Frederick Mayle) - "tools/mm/page-types: Fix misc bugs" (Ye Liu) Fix three issues in tools/mm/page-types.c - "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman) Implement several cleanups in the page allocator and related code - "mm, swap: swap table phase IV: unify allocation" (Kairui Song) Unify the allocation and charging of anon and shmem swap in folios, provides better synchronization, consolidates the metadata management, hence dropping the static array and map, and improves performance - "mm/damon: introduce data attributes monitoring" (SeongJae Park( Extend DAMON to monitor general data attributes other than accesses - "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra) Implement the TODO in vrealloc() to unmap and free unused pages when shrinking across a page boundary - "mm/damon: documentation and comment fixes" (niecheng) - "remove mmap_action success, error hooks" (Lorenzo Stoakes) Eliminate custom hooks from mmap_action by removing the problematic success_hook which allowed drivers to improperly access uninitialized VMAs. It replaces the error_hook with a simple error-code field and updates the memory char driver accordingly - "mm/damon: minor improvements for code readability and tests" (SeongJae Park) - "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym Shcherba) - "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike Rapoport) - "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and others) Clean up and slightly improves MGLRU's reclaim loop and dirty writeback handling. Large performance improvements are measured - "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren Baghdasaryan) Use per-vma locks when reading /proc/pid/smaps and numa_maps similar to reduce contention on central mmap_lock - "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()" (Ran Xiaokai) Some cleanup work in the THP code - "selftests/memfd: fix compilation warnings" (Konstantin Khorenko) Fix a few build glitches in the memfd selftest code. - "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel Butt) Resolve a 68% performance regression caused by NUMA-node cache thrashing around struct obj_stock_pcp by shrinking its existing fields and expanding it into a multi-slot array that caches up to five obj_cgroup pointers per CPU, allowing per-node variants of the same memcg to coexist within a single 64-byte cache line. - "zram: writeback fixes" (Sergey Senozhatsky) address a couple of unrelated zram writeback issues - "mm: switch THP shrinker to list_lru" (Johannes Weiner) Resolve NUMA-awareness issues and streamlines callsite interaction by refactoring and extending the list_lru API to completely replace the complex, open-coded deferred split queue for Transparent Huge Pages - "mm: improve large folio readahead for exec memory" (Usama Arif) Improve large-folio readahead on systems like 64K-page arm64 by preventing the mmap_miss check from permanently disabling target-oriented VM_EXEC readahead, and by generalizing the force_thp_readahead gate to support mappings with any usefully large maximum folio order under the cache cap. - "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau) Fix a bunch of minor issues in the userfaultfd/pagemap, all of which were flagged by Sashiko review of proposed new material - "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and vmemmap_check_pmd()" (Muchun Song) Provide generic versions of these two functions so the four arch-specific implementations can be removed. - "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device" (Youngjun Park) Address a uswsusp-vs-swapoff race and reduces the swap device reference taking/releasing frequency. - "mm/hmm: A fix and a selftest" (Dev Jain) * tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits) selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries fs/proc/task_mmu: do not warn on seeing non-migration pmd entry lib/test_hmm: check alloc_page_vma() return value and handle OOM mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX mm/swap: remove redundant swap device reference in alloc/free mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device mm/filemap: use folio_next_index() for start vmalloc: fix NULL pointer dereference in is_vm_area_hugepages() sparc/mm: drop vmemmap_check_pmd helper and use generic code loongarch/mm: drop vmemmap_check_pmd helper and use generic code riscv/mm: drop vmemmap_pmd helpers and use generic code arm64/mm: drop vmemmap_pmd helpers and use generic code mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd() rust: page: mark Page::nid as inline userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks userfaultfd: gate must_wait writability check on pte_present() mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole() fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry() fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race ...

mm/damon/core: trace esz at first setup

2026-06-04T21:45:02+00:00

DAMON traces effective size quota from the second update, only if a change has been made by the update. Tracing only changed updates was an intentional decision to avoid unnecessary same value tracing. Always skipping the first value is just an unintended mistake. The mistake makes the tracepoint based investigation incomplete, because the first effective size quota is never traced. It is not a big issue when the 'consist' quota tuner is used, because it keeps changing the quota in the usual setup. However, when the 'temporal' tuner is used, the quota value is not changed before the goal achievement status is completely changed. For example, if the DAMOS scheme is started with an under-achieved goal, the quota is set to the maximum value, and kept the same value until the goal is achieved. Because DAMON skips the first value, the user cannot know what effective quota the current scheme is using. Only after the goal is achieved, the effective quota is changed to zero, and traced. Unconditionally trace the initial quota value to fix this problem. Note that the 'temporal' quota tuner was introduced by commit af738a6a00c1 ("mm/damon/core: introduce DAMOS_QUOTA_GOAL_TUNER_TEMPORAL"), which was added to 7.1-rc1. But even with the 'consist' quota tuner, the tracing is unintentionally incomplete. Hence this commit marks the introduction of the trace event as the broken commit. Link: https://lore.kernel.org/20260520150311.80925-1-sj@kernel.org Fixes: a86d695193bf ("mm/damon: add trace event for effective size quota") Signed-off-by: SeongJae Park Cc: # 6.17.x Signed-off-by: Andrew Morton

mm/damon/tests/core-kunit: add damon_set_regions() test cases

2026-06-04T21:45:01+00:00

damon_set_regions() is one of the main DAMON kernel API functions that set up the monitoring target memory region boundaries. Implement unit tests for verifying its basic functionalities. Link: https://lore.kernel.org/20260522154026.80546-11-sj@kernel.org Signed-off-by: SeongJae Park Cc: Brendan Higgins Cc: Shuah Khan Signed-off-by: Andrew Morton

mm/damon/core: remove damon_verify_nr_regions()

2026-06-04T21:45:01+00:00

When CONFIG_DAMON_DEBUG_SANITY is enabled, damon_verify_nr_regions() is called for each damon_nr_regions() invocation. damon_veify_nr_regions() iterates all regions. damon_nr_regions() is called for each region in kdamond_reset_aggregated() and damos_apply_scheme(). Hence it imposes O(n**2) overhead where n is the number of regions. Though the verification is enabled only under DAMON_DEBUG_SANITY, which is not for production use cases, it could be too high overhead. Meanwhile, damon_verify_ctx() is doing the damon_nr_regions() test. Because damon_verify_ctx() is called for each kdamond_call(), the test coverage from damon_verify_ctx() could be sufficient. Remove damon_nr_regions() verification. Link: https://lore.kernel.org/20260522154026.80546-10-sj@kernel.org Signed-off-by: SeongJae Park Cc: Brendan Higgins Cc: Shuah Khan Signed-off-by: Andrew Morton

mm/damon/core: add kdamond_call() debug_sanity check

2026-06-04T21:45:01+00:00

kdamond_call() is the place where DAMON API callers are allowed to access the DAMON context's public internal state including the monitoring results. Hence it is important to ensure it is called with the expected DAMON context state. Do the check under DAMON_DEBUG_SANITY. Link: https://lore.kernel.org/20260522154026.80546-9-sj@kernel.org Signed-off-by: SeongJae Park Cc: Brendan Higgins Cc: Shuah Khan Signed-off-by: Andrew Morton

mm/damon/core: hide damon_destroy_region()

2026-06-04T21:45:01+00:00

damon_destroy_region() is being used by only DAMON core, but exposed to DAMON API callers. Exposing something that is not really being used by others will only increase the maintenance cost. Hide it. Link: https://lore.kernel.org/20260522154026.80546-8-sj@kernel.org Signed-off-by: SeongJae Park Cc: Brendan Higgins Cc: Shuah Khan Signed-off-by: Andrew Morton

mm/damon/core: hide damon_insert_region()

2026-06-04T21:45:01+00:00

damon_insert_region() is being used by only DAMON core, but exposed to DAMON API callers. Exposing something that is not really being used by others will only increase the maintenance cost. Hide it. Link: https://lore.kernel.org/20260522154026.80546-7-sj@kernel.org Signed-off-by: SeongJae Park Cc: Brendan Higgins Cc: Shuah Khan Signed-off-by: Andrew Morton

mm/damon/core: hide damon_add_region()

2026-06-04T21:45:00+00:00

damon_add_region() is being used by only DAMON core, but exposed to DAMON API callers. Exposing something that is not really being used by others will only increase the maintenance cost. Hide it. Link: https://lore.kernel.org/20260522154026.80546-6-sj@kernel.org Signed-off-by: SeongJae Park Cc: Brendan Higgins Cc: Shuah Khan Signed-off-by: Andrew Morton