kernel/linux.git/lib/cpumask.c, branch v4.14.307

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

cpumask: make cpumask_next() out-of-line

2017-09-09T01:26:51+00:00

Every for_each_XXX_cpu() invocation calls cpumask_next() which is an inline function: static inline unsigned int cpumask_next(int n, const struct cpumask *srcp) { /* -1 is a legal arg here. */ if (n != -1) cpumask_check(n); return find_next_bit(cpumask_bits(srcp), nr_cpumask_bits, n + 1); } However! find_next_bit() is regular out-of-line function which means "nr_cpu_ids" load and increment happen at the caller resulting in a lot of bloat x86_64 defconfig: add/remove: 3/0 grow/shrink: 8/373 up/down: 155/-5668 (-5513) x86_64 allyesconfig-ish: add/remove: 3/1 grow/shrink: 57/634 up/down: 3515/-28177 (-24662) !!! Some archs redefine find_next_bit() but it is OK: m68k inline but SMP is not supported arm out-of-line unicore32 out-of-line Function call will happen anyway, so move load and increment into callee. Link: http://lkml.kernel.org/r/20170824230010.GA1593@avx2 Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

sched/fair, cpumask: Export for_each_cpu_wrap()

2017-05-15T08:15:23+00:00

More users for for_each_cpu_wrap() have appeared. Promote the construct to generic cpumask interface. The implementation is slightly modified to reduce arguments. Signed-off-by: Peter Zijlstra (Intel) Cc: Lauro Ramos Venancio Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Rik van Riel Cc: Thomas Gleixner Cc: lwang@redhat.com Link: http://lkml.kernel.org/r/20170414122005.o35me2h5nowqkxbv@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar

cpumask: Export cpumask_any_but()

2016-02-29T08:35:20+00:00

Almost every cpumask function is exported, just not the one I need to make the Intel uncore driver modular. Signed-off-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Cc: Andi Kleen Cc: Arnaldo Carvalho de Melo Cc: Borislav Petkov Cc: David S. Miller Cc: Harish Chegondi Cc: Jacob Pan Cc: Jiri Olsa Cc: Kan Liang Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rusty Russell Cc: Stephane Eranian Cc: Vince Weaver Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20160222221011.878299859@linutronix.de Signed-off-by: Ingo Molnar

revert "cpumask: don't perform while loop in cpumask_next_and()"

2015-06-19T03:00:23+00:00

Revert commit 534b483a86e6 ("cpumask: don't perform while loop in cpumask_next_and()"). This was a minor optimization, but it puts a `struct cpumask' on the stack, which consumes too much stack space. Sergey Senozhatsky Reported-by: Peter Zijlstra Cc: Sergey Senozhatsky Cc: Tejun Heo Cc: "David S. Miller" Cc: Amir Vadai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

cpumask_set_cpu_local_first => cpumask_local_spread, lament

2015-05-28T01:35:20+00:00

da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a genuinely weird function. I never saw it before, it went through DaveM. (He only does this to make us other maintainers feel better about our own mistakes.) cpumask_set_cpu_local_first's purpose is say "I need to spread things across N online cpus, choose the ones on this numa node first"; you call it in a loop. It can fail. One of the two callers ignores this, the other aborts and fails the device open. It can fail in two ways: allocating the off-stack cpumask, or through a convoluted codepath which AFAICT can only occur if cpu_online_mask changes. Which shouldn't happen, because if cpu_online_mask can change while you call this, it could return a now-offline cpu anyway. It contains a nonsensical test "!cpumask_of_node(numa_node)". This was drawn to my attention by Geert, who said this causes a warning on Sparc. It sets a single bit in a cpumask instead of returning a cpu number, because that's what the callers want. It could be made more efficient by passing the previous cpu rather than an index, but that would be more invasive to the callers. Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf Signed-off-by: Rusty Russell (then rebased) Tested-by: Amir Vadai Acked-by: Amir Vadai Acked-by: David S. Miller

Merge tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

2015-04-20T17:19:03+00:00

Pull final removal of deprecated cpus_* cpumask functions from Rusty Russell: "This is the final removal (after several years!) of the obsolete cpus_* functions, prompted by their mis-use in staging. With these function removed, all cpu functions should only iterate to nr_cpu_ids, so we finally only allocate that many bits when cpumasks are allocated offstack" * tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits) cpumask: remove __first_cpu / __next_cpu cpumask: resurrect CPU_MASK_CPU0 linux/cpumask.h: add typechecking to cpumask_test_cpu cpumask: only allocate nr_cpumask_bits. Fix weird uses of num_online_cpus(). cpumask: remove deprecated functions. mips: fix obsolete cpumask_of_cpu usage. x86: fix more deprecated cpu function usage. ia64: remove deprecated cpus_ usage. powerpc: fix deprecated CPU_MASK_CPU0 usage. CPU_MASK_ALL/CPU_MASK_NONE: remove from deprecated region. staging/lustre/o2iblnd: Don't use cpus_weight staging/lustre/libcfs: replace deprecated cpus_ calls with cpumask_ staging/lustre/ptlrpc: Do not use deprecated cpus_* functions blackfin: fix up obsolete cpu function usage. parisc: fix up obsolete cpu function usage. tile: fix up obsolete cpu function usage. arm64: fix up obsolete cpu function usage. mips: fix up obsolete cpu function usage. x86: fix up obsolete cpu function usage. ...

cpumask: remove __first_cpu / __next_cpu

2015-04-19T05:05:32+00:00

They were for use by the deprecated first_cpu() and next_cpu() wrappers, but sparc used them directly. They're now replaced by cpumask_first / cpumask_next. And __next_cpu_nr is completely obsolete. Signed-off-by: Rusty Russell Acked-by: David S. Miller

cpumask: don't perform while loop in cpumask_next_and()

2015-04-17T13:04:08+00:00

cpumask_next_and() is looking for cpumask_next() in src1 in a loop and tests if found cpu is also present in src2. remove that loop, perform cpumask_and() of src1 and src2 first and use that new mask to find cpumask_next(). Apart from removing while loop, ./bloat-o-meter on x86_64 shows add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8 (-8) function old new delta cpumask_next_and 62 54 -8 Signed-off-by: Sergey Senozhatsky Cc: Tejun Heo Cc: "David S. Miller" Cc: Amir Vadai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

cpumask: only allocate nr_cpumask_bits.

2015-03-10T03:24:42+00:00

Now we'll find out the hard way if anyone has CPUMASK_OFFSTACK and is returning these or assigning them. Signed-off-by: Rusty Russell