kernel/linux.git/lib/Kconfig.debug, branch v6.13.6

lockdep: Fix upper limit for LOCKDEP_*_BITS configs

2025-02-17T10:35:54+00:00

[ Upstream commit e638072e61726cae363d48812815197a2a0e097f ] Lockdep has a set of configs used to determine the size of the static arrays that it uses. However, the upper limit that was initially setup for these configs is too high (30 bit shift). This equates to several GiB of static memory for individual symbols. Using such high values leads to linker errors: $ make defconfig $ ./scripts/config -e PROVE_LOCKING --set-val LOCKDEP_BITS 30 $ make olddefconfig all [...] ld: kernel image bigger than KERNEL_IMAGE_SIZE ld: section .bss VMA wraps around address space Adjust the upper limits to the maximum values that avoid these issues. The need for anything more, likely points to a problem elsewhere. Note that LOCKDEP_CHAINS_BITS was intentionally left out as its upper limit had a different symptom and has already been fixed [1]. Reported-by: J. R. Okajima Closes: https://lore.kernel.org/all/30795.1620913191@jrobl/ [1] Cc: Peter Zijlstra Cc: Boqun Feng Cc: Ingo Molnar Cc: Waiman Long Cc: Will Deacon Acked-by: Waiman Long Signed-off-by: Carlos Llamas Signed-off-by: Boqun Feng Link: https://lore.kernel.org/r/20241024183631.643450-2-cmllamas@google.com Signed-off-by: Sasha Levin

selftests: kallsyms: fix and clarify current test boundaries

2024-11-28T19:17:30+00:00

Provide and clarify the existing ranges and what you should expect. Fix the gen_test_kallsyms.sh script to accept different ranges. Fixes: 84b4a51fce4ccc66 ("selftests: add new kallsyms selftests") Signed-off-by: Luis Chamberlain

Merge tag 'modules-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux

2024-11-27T18:20:50+00:00

Pull modules updates from Luis Chamberlain: - The whole caching of module code into huge pages by Mike Rapoport is going in through Andrew Morton's tree due to some other code dependencies. That's really the biggest highlight for Linux kernel modules in this release. With it we share huge pages for modules, starting off with x86. Expect to see that soon through Andrew! - Helge Deller addressed some lingering low hanging fruit alignment enhancements by. It is worth pointing out that from his old patch series I dropped his vmlinux.lds.h change at Masahiro's request as he would prefer this to be specified in asm code [0]. [0] https://lore.kernel.org/all/20240129192644.3359978-5-mcgrof@kernel.org/T/#m9efef5e700fbecd28b7afb462c15eed8ba78ef5a - Matthew Maurer and Sami Tolvanen have been tag teaming to help get us closer to a modversions for Rust. In this cycle we take in quite a lot of the refactoring for ELF validation. I expect modversions for Rust will be merged by v6.14 as that code is mostly ready now. - Adds a new modules selftests: kallsyms which helps us tests find_symbol() and the limits of kallsyms on Linux today. - We have a realtime mailing list to kernel-ci testing for modules now which relies and combines patchwork, kpd and kdevops: https://patchwork.kernel.org/project/linux-modules/list/ https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/README.md https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/kernel-ci-kpd.md https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/linux-modules-kdevops-ci.md If you want to help avoid Linux kernel modules regressions, now its simple, just add a new Linux modules sefltests under tools/testing/selftests/module/ That is it. All new selftests will be used and leveraged automatically by the CI. * tag 'modules-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: tests/module/gen_test_kallsyms.sh: use 0 value for variables scripts: Remove export_report.pl selftests: kallsyms: add MODULE_DESCRIPTION selftests: add new kallsyms selftests module: Reformat struct for code style module: Additional validation in elf_validity_cache_strtab module: Factor out elf_validity_cache_strtab module: Group section index calculations together module: Factor out elf_validity_cache_index_str module: Factor out elf_validity_cache_index_sym module: Factor out elf_validity_cache_index_mod module: Factor out elf_validity_cache_index_info module: Factor out elf_validity_cache_secstrings module: Factor out elf_validity_cache_sechdrs module: Factor out elf_validity_ehdr module: Take const arg in validate_section_offset modules: Add missing entry for __ex_table modules: Ensure 64-bit alignment on __ksymtab_* sections

Merge tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2024-11-26T00:09:48+00:00

Pull non-MM updates from Andrew Morton: - The series "resource: A couple of cleanups" from Andy Shevchenko performs some cleanups in the resource management code - The series "Improve the copy of task comm" from Yafang Shao addresses possible race-induced overflows in the management of task_struct.comm[] - The series "Remove unnecessary header includes from {tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a small fix to the list_sort library code and to its selftest - The series "Enhance min heap API with non-inline functions and optimizations" also from Kuan-Wei Chiu optimizes and cleans up the min_heap library code - The series "nilfs2: Finish folio conversion" from Ryusuke Konishi finishes off nilfs2's folioification - The series "add detect count for hung tasks" from Lance Yang adds more userspace visibility into the hung-task detector's activity - Apart from that, singelton patches in many places - please see the individual changelogs for details * tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits) gdb: lx-symbols: do not error out on monolithic build kernel/reboot: replace sprintf() with sysfs_emit() lib: util_macros_kunit: add kunit test for util_macros.h util_macros.h: fix/rework find_closest() macros Improve consistency of '#error' directive messages ocfs2: fix uninitialized value in ocfs2_file_read_iter() hung_task: add docs for hung_task_detect_count hung_task: add detect count for hung tasks dma-buf: use atomic64_inc_return() in dma_buf_getfile() fs/proc/kcore.c: fix coccinelle reported ERROR instances resource: avoid unnecessary resource tree walking in __region_intersects() ocfs2: remove unused errmsg function and table ocfs2: cluster: fix a typo lib/scatterlist: use sg_phys() helper checkpatch: always parse orig_commit in fixes tag nilfs2: convert metadata aops from writepage to writepages nilfs2: convert nilfs_recovery_copy_block() to take a folio nilfs2: convert nilfs_page_count_clean_buffers() to take a folio nilfs2: remove nilfs_writepage nilfs2: convert checkpoint file to be folio-based ...

Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2024-11-23T17:58:07+00:00

Pull MM updates from Andrew Morton: - The series "zram: optimal post-processing target selection" from Sergey Senozhatsky improves zram's post-processing selection algorithm. This leads to improved memory savings. - Wei Yang has gone to town on the mapletree code, contributing several series which clean up the implementation: - "refine mas_mab_cp()" - "Reduce the space to be cleared for maple_big_node" - "maple_tree: simplify mas_push_node()" - "Following cleanup after introduce mas_wr_store_type()" - "refine storing null" - The series "selftests/mm: hugetlb_fault_after_madv improvements" from David Hildenbrand fixes this selftest for s390. - The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng implements some rationaizations and cleanups in the page mapping code. - The series "mm: optimize shadow entries removal" from Shakeel Butt optimizes the file truncation code by speeding up the handling of shadow entries. - The series "Remove PageKsm()" from Matthew Wilcox completes the migration of this flag over to being a folio-based flag. - The series "Unify hugetlb into arch_get_unmapped_area functions" from Oscar Salvador implements a bunch of consolidations and cleanups in the hugetlb code. - The series "Do not shatter hugezeropage on wp-fault" from Dev Jain takes away the wp-fault time practice of turning a huge zero page into small pages. Instead we replace the whole thing with a THP. More consistent cleaner and potentiall saves a large number of pagefaults. - The series "percpu: Add a test case and fix for clang" from Andy Shevchenko enhances and fixes the kernel's built in percpu test code. - The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett optimizes mremap() by avoiding doing things which we didn't need to do. - The series "Improve the tmpfs large folio read performance" from Baolin Wang teaches tmpfs to copy data into userspace at the folio size rather than as individual pages. A 20% speedup was observed. - The series "mm/damon/vaddr: Fix issue in damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting. - The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt removes the long-deprecated memcgv2 charge moving feature. - The series "fix error handling in mmap_region() and refactor" from Lorenzo Stoakes cleanup up some of the mmap() error handling and addresses some potential performance issues. - The series "x86/module: use large ROX pages for text allocations" from Mike Rapoport teaches x86 to use large pages for read-only-execute module text. - The series "page allocation tag compression" from Suren Baghdasaryan is followon maintenance work for the new page allocation profiling feature. - The series "page->index removals in mm" from Matthew Wilcox remove most references to page->index in mm/. A slow march towards shrinking struct page. - The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs interface tests" from Andrew Paniakin performs maintenance work for DAMON's self testing code. - The series "mm: zswap swap-out of large folios" from Kanchana Sridhar improves zswap's batching of compression and decompression. It is a step along the way towards using Intel IAA hardware acceleration for this zswap operation. - The series "kasan: migrate the last module test to kunit" from Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests over to the KUnit framework. - The series "implement lightweight guard pages" from Lorenzo Stoakes permits userapace to place fault-generating guard pages within a single VMA, rather than requiring that multiple VMAs be created for this. Improved efficiencies for userspace memory allocators are expected. - The series "memcg: tracepoint for flushing stats" from JP Kobryn uses tracepoints to provide increased visibility into memcg stats flushing activity. - The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky fixes a zram buglet which potentially affected performance. - The series "mm: add more kernel parameters to control mTHP" from Maíra Canal enhances our ability to control/configuremultisize THP from the kernel boot command line. - The series "kasan: few improvements on kunit tests" from Sabyrzhan Tasbolatov has a couple of fixups for the KASAN KUnit tests. - The series "mm/list_lru: Split list_lru lock into per-cgroup scope" from Kairui Song optimizes list_lru memory utilization when lockdep is enabled. * tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits) cma: enforce non-zero pageblock_order during cma_init_reserved_mem() mm/kfence: add a new kunit test test_use_after_free_read_nofault() zram: fix NULL pointer in comp_algorithm_show() memcg/hugetlb: add hugeTLB counters to memcg vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount zram: ZRAM_DEF_COMP should depend on ZRAM MAINTAINERS/MEMORY MANAGEMENT: add document files for mm Docs/mm/damon: recommend academic papers to read and/or cite mm: define general function pXd_init() kmemleak: iommu/iova: fix transient kmemleak false positive mm/list_lru: simplify the list_lru walk callback function mm/list_lru: split the lock to per-cgroup scope mm/list_lru: simplify reparenting and initial allocation mm/list_lru: code clean up for reparenting mm/list_lru: don't export list_lru_add mm/list_lru: don't pass unnecessary key parameters kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols ...

Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2024-11-21T16:28:08+00:00

Pull networking updates from Paolo Abeni: "The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core: - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infrastructure is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code: - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter: - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF: - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols: - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API: - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling: - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers: - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - add support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Add representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - add support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implement page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - add dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - add clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature" * tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits) mm: page_frag: fix a compile error when kernel is not compiled Documentation: tipc: fix formatting issue in tipc.rst selftests: nic_performance: Add selftest for performance of NIC driver selftests: nic_link_layer: Add selftest case for speed and duplex states selftests: nic_link_layer: Add link layer selftest for NIC driver bnxt_en: Add FW trace coredump segments to the coredump bnxt_en: Add a new ethtool -W dump flag bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr() bnxt_en: Add functions to copy host context memory bnxt_en: Do not free FW log context memory bnxt_en: Manage the FW trace context memory bnxt_en: Allocate backing store memory for FW trace logs bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem() bnxt_en: Refactor bnxt_free_ctx_mem() bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type bnxt_en: Update firmware interface spec to 1.10.3.85 selftests/bpf: Add some tests with sockmap SK_PASS bpf: fix recursive lock when verdict program return SK_PASS wireguard: device: support big tcp GSO wireguard: selftests: load nf_conntrack if not present ...

Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-11-20T00:35:06+00:00

Pull timer updates from Thomas Gleixner: "A rather large update for timekeeping and timers: - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: - Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. - Queuing ignored timer signals onto a seperate ignored list. - Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. - Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure - Move all sleep and timeout functions into one file - Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. - Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. - Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place - Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: - Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. - Mostly boring cleanups, fixes, improvements and code movement" * tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits) posix-timers: Fix spurious warning on double enqueue versus do_exit() clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties clocksource/drivers/gpx: Remove redundant casts clocksource/drivers/timer-ti-dm: Fix child node refcount handling dt-bindings: timer: actions,owl-timer: convert to YAML clocksource/drivers/ralink: Add Ralink System Tick Counter driver clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource clocksource/drivers/timer-ti-dm: Don't fail probe if int not found clocksource/drivers:sp804: Make user selectable clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions hrtimers: Delete hrtimer_init_on_stack() alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack() io_uring: Switch to use hrtimer_setup_on_stack() sched/idle: Switch to use hrtimer_setup_on_stack() hrtimers: Delete hrtimer_init_sleeper_on_stack() wait: Switch to use hrtimer_setup_sleeper_on_stack() timers: Switch to use hrtimer_setup_sleeper_on_stack() net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack() futex: Switch to use hrtimer_setup_sleeper_on_stack() fs/aio: Switch to use hrtimer_setup_sleeper_on_stack() ...

Merge tag 'locking-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-11-19T20:43:11+00:00

Pull locking updates from Ingo Molnar: "Lockdep: - Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING (Sebastian Andrzej Siewior) - Add lockdep_cleanup_dead_cpu() (David Woodhouse) futexes: - Use atomic64_inc_return() in get_inode_sequence_number() (Uros Bizjak) - Use atomic64_try_cmpxchg_relaxed() in get_inode_sequence_number() (Uros Bizjak) RT locking: - Add sparse annotation PREEMPT_RT's locking (Sebastian Andrzej Siewior) spinlocks: - Use atomic_try_cmpxchg_release() in osq_unlock() (Uros Bizjak) atomics: - x86: Use ALT_OUTPUT_SP() for __alternative_atomic64() (Uros Bizjak) - x86: Use ALT_OUTPUT_SP() for __arch_{,try_}cmpxchg64_emu() (Uros Bizjak) KCSAN, seqlocks: - Support seqcount_latch_t (Marco Elver) : - Add if_not_guard() conditional guard helper (David Lechner) - Adjust scoped_guard() macros to avoid potential warning (Przemek Kitszel) - Remove address space of returned pointer (Uros Bizjak) WW mutexes: - locking/ww_mutex: Adjust to lockdep nest_lock requirements (Thomas Hellström) Rust integration: - Fix raw_spin_lock initialization on PREEMPT_RT (Eder Zulian) Misc cleanups & fixes: - lockdep: Fix wait-type check related warnings (Ahmed Ehab) - lockdep: Use info level for initial info messages (Jiri Slaby) - spinlocks: Make __raw_* lock ops static (Geert Uytterhoeven) - pvqspinlock: Convert fields of 'enum vcpu_state' to uppercase (Qiuxu Zhuo) - iio: magnetometer: Fix if () scoped_guard() formatting (Stephen Rothwell) - rtmutex: Fix misleading comment (Peter Zijlstra) - percpu-rw-semaphores: Fix grammar in percpu-rw-semaphore.rst (Xiu Jianfeng)" * tag 'locking-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) locking/Documentation: Fix grammar in percpu-rw-semaphore.rst iio: magnetometer: fix if () scoped_guard() formatting rust: helpers: Avoid raw_spin_lock initialization for PREEMPT_RT kcsan, seqlock: Fix incorrect assumption in read_seqbegin() seqlock, treewide: Switch to non-raw seqcount_latch interface kcsan, seqlock: Support seqcount_latch_t time/sched_clock: Broaden sched_clock()'s instrumentation coverage time/sched_clock: Swap update_clock_read_data() latch writes locking/atomic/x86: Use ALT_OUTPUT_SP() for __arch_{,try_}cmpxchg64_emu() locking/atomic/x86: Use ALT_OUTPUT_SP() for __alternative_atomic64() cleanup: Add conditional guard helper cleanup: Adjust scoped_guard() macros to avoid potential warning locking/osq_lock: Use atomic_try_cmpxchg_release() in osq_unlock() cleanup: Remove address space of returned pointer locking/rtmutex: Fix misleading comment locking/rt: Annotate unlock followed by lock for sparse. locking/rt: Add sparse annotation for RCU. locking/rt: Remove one __cond_lock() in RT's spin_trylock_irqsave() locking/rt: Add sparse annotation PREEMPT_RT's sleeping locks. locking/pvqspinlock: Convert fields of 'enum vcpu_state' to uppercase ...

Merge tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2024-11-19T01:45:41+00:00

Pull s390 updates from Heiko Carstens: - Add firmware sysfs interface which allows user space to retrieve the dump area size of the machine - Add 'measurement_chars_full' CHPID sysfs attribute to make the complete associated Channel-Measurements Characteristics Block available - Add virtio-mem support - Move gmap aka KVM page fault handling from the main fault handler to KVM code. This is the first step to make s390 KVM page fault handling similar to other architectures. With this first step the main fault handler does not have any special handling anymore, and therefore convert it to support LOCK_MM_AND_FIND_VMA - With gcc 14 s390 support for flag output operand support for inline assemblies was added. This allows for several optimizations: - Provide a cmpxchg inline assembly which makes use of this, and provide all variants of arch_try_cmpxchg() so that the compiler can generate slightly better code - Convert a few cmpxchg() loops to try_cmpxchg() loops - Similar to x86 add a CC_OUT() helper macro (and other macros), and convert all inline assemblies to make use of them, so that depending on compiler version better code can be generated - List installed host-key hashes in sysfs if the machine supports the Query Ultravisor Keys UVC - Add 'Retrieve Secret' ioctl which allows user space in protected execution guests to retrieve previously stored secrets from the Ultravisor - Add pkey-uv module which supports the conversion of Ultravisor retrievable secrets to protected keys - Extend the existing paes cipher to exploit the full AES-XTS hardware acceleration introduced with message-security assist extension 10 - Convert hopefully all sysfs show functions to use sysfs_emit() so that the constant flow of such patches stop - For PCI devices make use of the newly added Topology ID attribute to enable whole card multi-function support despite the change to PCHID per port. Additionally improve the overall robustness and usability of the multifunction support - Various other small improvements, fixes, and cleanups * tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (133 commits) s390/cio/ioasm: Convert to use flag output macros s390/cio/qdio: Convert to use flag output macros s390/sclp: Convert to use flag output macros s390/dasd: Convert to use flag output macros s390/boot/physmem: Convert to use flag output macros s390/pci: Convert to use flag output macros s390/kvm: Convert to use flag output macros s390/extmem: Convert to use flag output macros s390/string: Convert to use flag output macros s390/diag: Convert to use flag output macros s390/irq: Convert to use flag output macros s390/smp: Convert to use flag output macros s390/uv: Convert to use flag output macros s390/pai: Convert to use flag output macros s390/mm: Convert to use flag output macros s390/cpu_mf: Convert to use flag output macros s390/cpcmd: Convert to use flag output macros s390/topology: Convert to use flag output macros s390/time: Convert to use flag output macros s390/pageattr: Convert to use flag output macros ...

net: Implement fault injection forcing skb reallocation

2024-11-12T11:05:33+00:00

Introduce a fault injection mechanism to force skb reallocation. The primary goal is to catch bugs related to pointer invalidation after potential skb reallocation. The fault injection mechanism aims to identify scenarios where callers retain pointers to various headers in the skb but fail to reload these pointers after calling a function that may reallocate the data. This type of bug can lead to memory corruption or crashes if the old, now-invalid pointers are used. By forcing reallocation through fault injection, we can stress-test code paths and ensure proper pointer management after potential skb reallocations. Add a hook for fault injection in the following functions: * pskb_trim_rcsum() * pskb_may_pull_reason() * pskb_trim() As the other fault injection mechanism, protect it under a debug Kconfig called CONFIG_FAIL_SKB_REALLOC. This patch was *heavily* inspired by Jakub's proposal from: https://lore.kernel.org/all/20240719174140.47a868e6@kernel.org/ CC: Akinobu Mita Suggested-by: Jakub Kicinski Signed-off-by: Breno Leitao Reviewed-by: Akinobu Mita Acked-by: Paolo Abeni Acked-by: Guillaume Nault Link: https://patch.msgid.link/20241107-fault_v6-v6-1-1b82cb6ecacd@debian.org Signed-off-by: Paolo Abeni