kernel/linux.git/include, branch v5.10.34

bpf: Allow variable-offset stack access

2021-04-28T11:40:00+00:00

[ Upstream commit 01f810ace9ed37255f27608a0864abebccf0aab3 ] Before this patch, variable offset access to the stack was dissalowed for regular instructions, but was allowed for "indirect" accesses (i.e. helpers). This patch removes the restriction, allowing reading and writing to the stack through stack pointers with variable offsets. This makes stack-allocated buffers more usable in programs, and brings stack pointers closer to other types of pointers. The motivation is being able to use stack-allocated buffers for data manipulation. When the stack size limit is sufficient, allocating buffers on the stack is simpler than per-cpu arrays, or other alternatives. In unpriviledged programs, variable-offset reads and writes are disallowed (they were already disallowed for the indirect access case) because the speculative execution checking code doesn't support them. Additionally, when writing through a variable-offset stack pointer, if any pointers are in the accessible range, there's possilibities of later leaking pointers because the write cannot be tracked precisely. Writes with variable offset mark the whole range as initialized, even though we don't know which stack slots are actually written. This is in order to not reject future reads to these slots. Note that this doesn't affect writes done through helpers; like before, helpers need the whole stack range to be initialized to begin with. All the stack slots are in range are considered scalars after the write; variable-offset register spills are not tracked. For reads, all the stack slots in the variable range needs to be initialized (but see above about what writes do), otherwise the read is rejected. All register spilled in stack slots that might be read are marked as having been read, however reads through such pointers don't do register filling; the target register will always be either a scalar or a constant zero. Signed-off-by: Andrei Matei Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20210207011027.676572-2-andreimatei1@gmail.com Signed-off-by: Sasha Levin

gpio: omap: Save and restore sysconfig

2021-04-28T11:39:59+00:00

[ Upstream commit ddd8d94ca31e768c76cf8bfe34ba7b10136b3694 ] As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm. We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value. Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Cc: Aaro Koskinen Cc: Adam Ford Cc: Andreas Kemnade Cc: Grygorii Strashko Cc: Peter Ujfalusi Signed-off-by: Tony Lindgren Acked-by: Grygorii Strashko Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

net: phy: marvell: fix detection of PHY on Topaz switches

2021-04-21T11:01:00+00:00

commit 1fe976d308acb6374c899a4ee8025a0a016e453e upstream. Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading"), Linux reports the temperature of Topaz hwmon as constant -75°C. This is because switches from the Topaz family (88E6141 / 88E6341) have the address of the temperature sensor register different from Peridot. This address is instead compatible with 88E1510 PHYs, as was used for Topaz before the above mentioned commit. Create a new mapping table between switch family and PHY ID for families which don't have a model number. And define PHY IDs for Topaz and Peridot families. Create a new PHY ID and a new PHY driver for Topaz's internal PHY. The only difference from Peridot's PHY driver is the HWMON probing method. Prior this change Topaz's internal PHY is detected by kernel as: PHY [...] driver [Marvell 88E6390] (irq=63) And afterwards as: PHY [...] driver [Marvell 88E6341 Family] (irq=63) Signed-off-by: Pali Rohár BugLink: https://github.com/globalscaletechnologies/linux/issues/1 Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading") Reviewed-by: Marek Behún Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

netfilter: arp_tables: add pre_exit hook for table unregister

2021-04-21T11:00:56+00:00

commit d163a925ebbc6eb5b562b0f1d72c7e817aa75c40 upstream. Same problem that also existed in iptables/ip(6)tables, when arptable_filter is removed there is no longer a wait period before the table/ruleset is free'd. Unregister the hook in pre_exit, then remove the table in the exit function. This used to work correctly because the old nf_hook_unregister API did unconditional synchronize_net. The per-net hook unregister function uses call_rcu instead. Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

netfilter: bridge: add pre_exit hooks for ebtable unregistration

2021-04-21T11:00:55+00:00

commit 7ee3c61dcd28bf6e290e06ad382f13511dc790e9 upstream. Just like ip/ip6/arptables, the hooks have to be removed, then synchronize_rcu() has to be called to make sure no more packets are being processed before the ruleset data is released. Place the hook unregistration in the pre_exit hook, then call the new ebtables pre_exit function from there. Years ago, when first netns support got added for netfilter+ebtables, this used an older (now removed) netfilter hook unregister API, that did a unconditional synchronize_rcu(). Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit handlers may free the ebtable ruleset while packets are still in flight. This can only happens on module removal, not during netns exit. The new function expects the table name, not the table struct. This is because upcoming patch set (targeting -next) will remove all net->xt.{nat,filter,broute}_table instances, this makes it necessary to avoid external references to those member variables. The existing APIs will be converted, so follow the upcoming scheme of passing name + hook type instead. Fixes: aee12a0a3727e ("ebtables: remove nf_hook_register usage") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

dmaengine: idxd: fix delta_rec and crc size field for completion record

2021-04-21T11:00:50+00:00

[ Upstream commit 4ac823e9cd85f66da274c951d21bf9f6b714b729 ] The delta_rec_size and crc_val in the completion record should be 32bits and not 16bits. Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Reported-by: Nikhil Rao Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/161645618572.2003490.14466173451736323035.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

gpu: host1x: Use different lock classes for each client

2021-04-16T09:43:20+00:00

[ Upstream commit a24f98176d1efae2c37d3438c57a624d530d9c33 ] To avoid false lockdep warnings, give each client lock a different lock class, passed from the initialization site by macro. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

net/mlx5: Fix PBMC register mapping

2021-04-14T06:42:11+00:00

[ Upstream commit 534b1204ca4694db1093b15cf3e79a99fcb6a6da ] Add reserved mapping to cover all the register in order to avoid setting arbitrary values to newer FW which implements the reserved fields. Fixes: 50b4a3c23646 ("net/mlx5: PPTB and PBMC register firmware command support") Signed-off-by: Aya Levin Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

net/mlx5: Fix PPLM register mapping

2021-04-14T06:42:11+00:00

[ Upstream commit ce28f0fd670ddffcd564ce7119bdefbaf08f02d3 ] Add reserved mapping to cover all the register in order to avoid setting arbitrary values to newer FW which implements the reserved fields. Fixes: a58837f52d43 ("net/mlx5e: Expose FEC feilds and related capability bit") Signed-off-by: Aya Levin Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

net/mlx5: Fix placement of log_max_flow_counter

2021-04-14T06:42:11+00:00

[ Upstream commit a14587dfc5ad2312dabdd42a610d80ecd0dc8bea ] The cited commit wrongly placed log_max_flow_counter field of mlx5_ifc_flow_table_prop_layout_bits, align it to the HW spec intended placement. Fixes: 16f1c5bb3ed7 ("net/mlx5: Check device capability for maximum flow counters") Signed-off-by: Raed Salem Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin