kernel/linux.git/include, branch v4.9.305

HID: add mapping for KEY_ALL_APPLICATIONS

2022-03-08T18:00:59+00:00

commit 327b89f0acc4c20a06ed59e4d9af7f6d804dc2e2 upstream. This patch adds a new key definition for KEY_ALL_APPLICATIONS and aliases KEY_DASHBOARD to it. It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS. Signed-off-by: William Mahon Acked-by: Benjamin Tissoires Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeid Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

netfilter: nf_queue: fix possible use-after-free

2022-03-08T18:00:57+00:00

commit c3873070247d9e3c7a6b0cf9bf9b45e8018427b1 upstream. Eric Dumazet says: The sock_hold() side seems suspect, because there is no guarantee that sk_refcnt is not already 0. On failure, we cannot queue the packet and need to indicate an error. The packet will be dropped by the caller. v2: split skb prefetch hunk into separate change Fixes: 271b72c7fa82c ("udp: RCU handling for Unicast packets.") Reported-by: Eric Dumazet Reviewed-by: Eric Dumazet Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman

openvswitch: Fix setting ipv6 fields causing hw csum failure

2022-03-02T10:32:02+00:00

commit d9b5ae5c1b241b91480aa30408be12fe91af834a upstream. Ipv6 ttl, label and tos fields are modified without first pulling/pushing the ipv6 header, which would have updated the hw csum (if available). This might cause csum validation when sending the packet to the stack, as can be seen in the trace below. Fix this by updating skb->csum if available. Trace resulted by ipv6 ttl dec and then sending packet to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]: [295241.900063] s_pf0vf2: hw csum failure [295241.923191] Call Trace: [295241.925728] [295241.927836] dump_stack+0x5c/0x80 [295241.931240] __skb_checksum_complete+0xac/0xc0 [295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack] [295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack] [295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch] [295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch] [295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch] [295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch] [295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch] [295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch] [295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch] [295242.034074] __netif_receive_skb_core+0x2ca/0xcb0 [295242.047498] netif_receive_skb_internal+0x3e/0xc0 [295242.052291] napi_gro_receive+0xba/0xe0 [295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core] [295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core] [295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core] [295242.077958] net_rx_action+0x149/0x3b0 [295242.086762] __do_softirq+0xd7/0x2d6 [295242.090427] irq_exit+0xf7/0x100 [295242.093748] do_IRQ+0x7f/0xd0 [295242.096806] common_interrupt+0xf/0xf [295242.100559] [295242.102750] RIP: 0033:0x7f9022e88cbd [295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda [295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000 [295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30 [295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340 [295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000 [295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40 Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action") Signed-off-by: Paul Blakey Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: fix a memleak when uncloning an skb dst and its metadata

2022-02-16T11:43:54+00:00

[ Upstream commit 9eeabdf17fa0ab75381045c867c370f4cc75a613 ] When uncloning an skb dst and its associated metadata, a new dst+metadata is allocated and later replaces the old one in the skb. This is helpful to have a non-shared dst+metadata attached to a specific skb. The issue is the uncloned dst+metadata is initialized with a refcount of 1, which is increased to 2 before attaching it to the skb. When tun_dst_unclone returns, the dst+metadata is only referenced from a single place (the skb) while its refcount is 2. Its refcount will never drop to 0 (when the skb is consumed), leading to a memory leak. Fix this by removing the call to dst_hold in tun_dst_unclone, as the dst+metadata refcount is already 1. Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.") Cc: Pravin B Shelar Reported-by: Vlad Buslov Tested-by: Vlad Buslov Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: do not keep the dst cache when uncloning an skb dst and its metadata

2022-02-16T11:43:53+00:00

[ Upstream commit cfc56f85e72f5b9c5c5be26dc2b16518d36a7868 ] When uncloning an skb dst and its associated metadata a new dst+metadata is allocated and the tunnel information from the old metadata is copied over there. The issue is the tunnel metadata has references to cached dst, which are copied along the way. When a dst+metadata refcount drops to 0 the metadata is freed including the cached dst entries. As they are also referenced in the initial dst+metadata, this ends up in UaFs. In practice the above did not happen because of another issue, the dst+metadata was never freed because its refcount never dropped to 0 (this will be fixed in a subsequent patch). Fix this by initializing the dst cache after copying the tunnel information from the old metadata to also unshare the dst cache. Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel") Cc: Paolo Abeni Reported-by: Vlad Buslov Tested-by: Vlad Buslov Signed-off-by: Antoine Tenart Acked-by: Paolo Abeni Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

netfilter: nat: remove l4 protocol port rovers

2022-02-08T17:15:28+00:00

commit 6ed5943f8735e2b778d92ea4d9805c0a1d89bc2b upstream. This is a leftover from days where single-cpu systems were common: Store last port used to resolve a clash to use it as a starting point when the next conflict needs to be resolved. When we have parallel attempt to connect to same address:port pair, its likely that both cores end up computing the same "available" port, as both use same starting port, and newly used ports won't become visible to other cores until the conntrack gets confirmed later. One of the cores then has to drop the packet at insertion time because the chosen new tuple turns out to be in use after all. Lets simplify this: remove port rover and use a pseudo-random starting point. Note that this doesn't make netfilter default to 'fully random' mode; the 'rover' was only used if NAT could not reuse source port as-is. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

ipv4: avoid using shared IP generator for connected sockets

2022-02-08T17:15:27+00:00

commit 23f57406b82de51809d5812afd96f210f8b627f3 upstream. ip_select_ident_segs() has been very conservative about using the connected socket private generator only for packets with IP_DF set, claiming it was needed for some VJ compression implementations. As mentioned in this referenced document, this can be abused. (Ref: Off-Path TCP Exploits of the Mixed IPID Assignment) Before switching to pure random IPID generation and possibly hurt some workloads, lets use the private inet socket generator. Not only this will remove one vulnerability, this will also improve performance of TCP flows using pmtudisc==IP_PMTUDISC_DONT Fixes: 73f156a6e8c1 ("inetpeer: get rid of ip_id_count") Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Reported-by: Ray Che Cc: Willy Tarreau Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: fix information leakage in /proc/net/ptype

2022-02-08T17:15:27+00:00

commit 47934e06b65637c88a762d9c98329ae6e3238888 upstream. In one net namespace, after creating a packet socket without binding it to a device, users in other net namespaces can observe the new `packet_type` added by this packet socket by reading `/proc/net/ptype` file. This is minor information leakage as packet socket is namespace aware. Add a net pointer in `packet_type` to keep the net namespace of of corresponding packet socket. In `ptype_seq_show`, this net pointer must be checked when it is not NULL. Fixes: 2feb27dbe00c ("[NETNS]: Minor information leak via /proc/net/ptype file.") Signed-off-by: Congyu Liu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

mm: add follow_pte_pmd()

2022-01-27T07:47:43+00:00

commit 097963959594c5eccaba42510f7033f703211bda upstream. Patch series "Write protect DAX PMDs in *sync path". Currently dax_mapping_entry_mkclean() fails to clean and write protect the pmd_t of a DAX PMD entry during an *sync operation. This can result in data loss, as detailed in patch 2. This series is based on Dan's "libnvdimm-pending" branch, which is the current home for Jan's "dax: Page invalidation fixes" series. You can find a working tree here: https://git.kernel.org/cgit/linux/kernel/git/zwisler/linux.git/log/?h=dax_pmd_clean This patch (of 2): Similar to follow_pte(), follow_pte_pmd() allows either a PTE leaf or a huge page PMD leaf to be found and returned. Link: http://lkml.kernel.org/r/1482272586-21177-2-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler Suggested-by: Dave Hansen Cc: Alexander Viro Cc: Christoph Hellwig Cc: Dan Williams Cc: Dave Chinner Cc: Jan Kara Cc: Matthew Wilcox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

lib/timerqueue: Rely on rbtree semantics for next timer

2022-01-27T07:47:42+00:00

commit 511885d7061eda3eb1faf3f57dcc936ff75863f1 upstream. Simplify the timerqueue code by using cached rbtrees and rely on the tree leftmost node semantics to get the timer with earliest expiration time. This is a drop in conversion, and therefore semantics remain untouched. The runtime overhead of cached rbtrees is be pretty much the same as the current head->next method, noting that when removing the leftmost node, a common operation for the timerqueue, the rb_next(leftmost) is O(1) as well, so the next timer will either be the right node or its parent. Therefore no extra pointer chasing. Finally, the size of the struct timerqueue_head remains the same. Passes several hours of rcutorture. Signed-off-by: Davidlohr Bueso Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/20190724152323.bojciei3muvfxalm@linux-r8p5 [bwh: While this was supposed to be just refactoring, it also fixed a security flaw (CVE-2021-20317). Backported to 4.9: - Deleted code in timerqueue_del() is different before commit d852d39432f5 "timerqueue: Use rb_entry_safe() instead of open-coding it" - Adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman