kernel/linux.git/include, branch v4.5.4

xen: Fix page <-> pfn conversion on 32 bit systems

2016-05-11T09:21:33+00:00

commit 60901df3aed230d4565dca003f11b6a95fbf30d9 upstream. Commit 1084b1988d22dc165c9dbbc2b0e057f9248ac4db (xen: Add Xen specific page definition) caused a regression in 4.4. The xen functions to convert between pages and pfns fail due to an overflow on systems where a physical address may not fit in an unsigned long (e.g. x86 32 bit PAE systems). Rework the conversion to avoid overflow. This should also result in simpler object code. This bug manifested itself as disk corruption with Linux 4.4 when using blkfront in a Xen HVM x86 32 bit guest with more than 4 GiB of memory. Signed-off-by: Ross Lagerwall Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman

mm: memcontrol: let v2 cgroups follow changes in system swappiness

2016-05-11T09:21:31+00:00

commit 4550c4e157ca3da929593bb6c64080a59141af35 upstream. Cgroup2 currently doesn't have a per-cgroup swappiness setting. We might want to add one later - that's a different discussion - but until we do, the cgroups should always follow the system setting. Otherwise it will be unchangeably set to whatever the ancestor inherited from the system setting at the time of cgroup creation. Signed-off-by: Johannes Weiner Acked-by: Michal Hocko Acked-by: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

Minimal fix-up of bad hashing behavior of hash_64()

2016-05-11T09:21:31+00:00

commit 689de1d6ca95b3b5bd8ee446863bf81a4883ea25 upstream. This is a fairly minimal fixup to the horribly bad behavior of hash_64() with certain input patterns. In particular, because the multiplicative value used for the 64-bit hash was intentionally bit-sparse (so that the multiply could be done with shifts and adds on architectures without hardware multipliers), some bits did not get spread out very much. In particular, certain fairly common bit ranges in the input (roughly bits 12-20: commonly with the most information in them when you hash things like byte offsets in files or memory that have block factors that mean that the low bits are often zero) would not necessarily show up much in the result. There's a bigger patch-series brewing to fix up things more completely, but this is the fairly minimal fix for the 64-bit hashing problem. It simply picks a much better constant multiplier, spreading the bits out a lot better. NOTE! For 32-bit architectures, the bad old hash_64() remains the same for now, since 64-bit multiplies are expensive. The bigger hashing cleanup will replace the 32-bit case with something better. The new constants were picked by George Spelvin who wrote that bigger cleanup series. I just picked out the constants and part of the comment from that series. Cc: George Spelvin Cc: Thomas Gleixner Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

clk-divider: make sure read-only dividers do not write to their register

2016-05-11T09:21:28+00:00

commit 50359819794b4a16ae35051cd80f2dab025f6019 upstream. Commit e6d5e7d90be9 ("clk-divider: Fix READ_ONLY when divider > 1") removed the special ops struct for read-only clocks and instead opted to handle them inside the regular ops. On the rk3368 this results in breakage as aclkm now gets set a value. While it is the same divider value, the A53 core still doesn't like it, which can result in the cpu ending up in a hang. The reason being that "ACLKENMasserts one clock cycle before the rising edge of ACLKM" and the clock should only be touched when STANDBYWFIL2 is asserted. To fix this, reintroduce the read-only ops but do include the round_rate callback. That way no writes that may be unsafe are done to the divider register in any case. The Rockchip use of the clk_divider_ops is adapted to this split again, as is the nxp, lpc18xx-ccu driver that was included since the original commit. On lpc18xx-ccu the divider seems to always be read-only so only uses the new ops now. Fixes: e6d5e7d90be9 ("clk-divider: Fix READ_ONLY when divider > 1") Reported-by: Zhang Qing Signed-off-by: Heiko Stuebner Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman

ipvs: drop first packet to redirect conntrack

2016-05-11T09:21:24+00:00

commit f719e3754ee2f7275437e61a6afd520181fdd43b upstream. Jiri Bohac is reporting for a problem where the attempt to reschedule existing connection to another real server needs proper redirect for the conntrack used by the IPVS connection. For example, when IPVS connection is created to NAT-ed real server we alter the reply direction of conntrack. If we later decide to select different real server we can not alter again the conntrack. And if we expire the old connection, the new connection is left without conntrack. So, the only way to redirect both the IPVS connection and the Netfilter's conntrack is to drop the SYN packet that hits existing connection, to wait for the next jiffie to expire the old connection and its conntrack and to rely on client's retransmission to create new connection as usually. Jiri Bohac provided a fix that drops all SYNs on rescheduling, I extended his patch to do such drops only for connections that use conntrack. Here is the original report from Jiri Bohac: Since commit dc7b3eb900aa ("ipvs: Fix reuse connection if real server is dead"), new connections to dead servers are redistributed immediately to new servers. The old connection is expired using ip_vs_conn_expire_now() which sets the connection timer to expire immediately. However, before the timer callback, ip_vs_conn_expire(), is run to clean the connection's conntrack entry, the new redistributed connection may already be established and its conntrack removed instead. Fix this by dropping the first packet of the new connection instead, like we do when the destination server is not available. The timer will have deleted the old conntrack entry long before the first packet of the new connection is retransmitted. Fixes: dc7b3eb900aa ("ipvs: Fix reuse connection if real server is dead") Signed-off-by: Jiri Bohac Signed-off-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: Greg Kroah-Hartman

dmaengine: mmp-pdma: add number of requestors

2016-05-04T21:49:16+00:00

commit c283e41ef32442f41e7180f9bb1c5aedf9255bfe upstream. The DMA chip has a fixed number of requestor lines used for flow control. This number is platform dependent. The pxa_dma dma driver will use this value to activate or not the flow control. There won't be any impact on mmp_pdma driver. Signed-off-by: Robert Jarzmik Signed-off-by: Greg Kroah-Hartman

tpm: fix checks for policy digest existence in tpm2_seal_trusted()

2016-05-04T21:49:15+00:00

commit f3c82ade7c59303167d56b0be3e0707751fc45e2 upstream. In my original patch sealing with policy was done with dynamically allocated buffer that I changed later into an array so the checks in tpm2-cmd.c became invalid. This patch fixes the issue. Fixes: 5beb0c435bdd ("keys, trusted: seal with a TPM2 authorization policy") Reported-by: Dan Carpenter Signed-off-by: Jarkko Sakkinen Acked-by: Peter Huewe Signed-off-by: Greg Kroah-Hartman

numa: fix /proc//numa_maps for THP

2016-05-04T21:49:10+00:00

commit 28093f9f34cedeaea0f481c58446d9dac6dd620f upstream. In gather_pte_stats() a THP pmd is cast into a pte, which is wrong because the layouts may differ depending on the architecture. On s390 this will lead to inaccurate numa_maps accounting in /proc because of misguided pte_present() and pte_dirty() checks on the fake pte. On other architectures pte_present() and pte_dirty() may work by chance, but there may be an issue with direct-access (dax) mappings w/o underlying struct pages when HAVE_PTE_SPECIAL is set and THP is available. In vm_normal_page() the fake pte will be checked with pte_special() and because there is no "special" bit in a pmd, this will always return false and the VM_PFNMAP | VM_MIXEDMAP checking will be skipped. On dax mappings w/o struct pages, an invalid struct page pointer would then be returned that can crash the kernel. This patch fixes the numa_maps THP handling by introducing new "_pmd" variants of the can_gather_numa_stats() and vm_normal_page() functions. Signed-off-by: Gerald Schaefer Cc: Naoya Horiguchi Cc: "Kirill A . Shutemov" Cc: Konstantin Khlebnikov Cc: Michal Hocko Cc: Vlastimil Babka Cc: Jerome Marchand Cc: Johannes Weiner Cc: Dave Hansen Cc: Mel Gorman Cc: Dan Williams Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Michael Holzheu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm: exclude HugeTLB pages from THP page_mapped() logic

2016-05-04T21:49:09+00:00

commit 66ee95d16a7f1b7b4f1dd74a2d81c6e19dc29a14 upstream. HugeTLB pages cannot be split, so we use the compound_mapcount to track rmaps. Currently page_mapped() will check the compound_mapcount, but will also go through the constituent pages of a THP compound page and query the individual _mapcount's too. Unfortunately, page_mapped() does not distinguish between HugeTLB and THP compound pages and assumes that a compound page always needs to have HPAGE_PMD_NR pages querying. For most cases when dealing with HugeTLB this is just inefficient, but for scenarios where the HugeTLB page size is less than the pmd block size (e.g. when using contiguous bit on ARM) this can lead to crashes. This patch adjusts the page_mapped function such that we skip the unnecessary THP reference checks for HugeTLB pages. Fixes: e1534ae95004 ("mm: differentiate page_mapped() from page_mapcount() for compound pages") Signed-off-by: Steve Capper Acked-by: Kirill A. Shutemov Cc: Will Deacon Cc: Catalin Marinas Cc: Michal Hocko Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

cgroup, cpuset: replace cpuset_post_attach_flush() with cgroup_subsys->post_attach callback

2016-05-04T21:49:09+00:00

commit 5cf1cacb49aee39c3e02ae87068fc3c6430659b0 upstream. Since e93ad19d0564 ("cpuset: make mm migration asynchronous"), cpuset kicks off asynchronous NUMA node migration if necessary during task migration and flushes it from cpuset_post_attach_flush() which is called at the end of __cgroup_procs_write(). This is to avoid performing migration with cgroup_threadgroup_rwsem write-locked which can lead to deadlock through dependency on kworker creation. memcg has a similar issue with charge moving, so let's convert it to an official callback rather than the current one-off cpuset specific function. This patch adds cgroup_subsys->post_attach callback and makes cpuset register cpuset_post_attach_flush() as its ->post_attach. The conversion is mostly one-to-one except that the new callback is called under cgroup_mutex. This is to guarantee that no other migration operations are started before ->post_attach callbacks are finished. cgroup_mutex is one of the outermost mutex in the system and has never been and shouldn't be a problem. We can add specialized synchronization around __cgroup_procs_write() but I don't think there's any noticeable benefit. Signed-off-by: Tejun Heo Cc: Li Zefan Cc: Johannes Weiner Cc: Michal Hocko Signed-off-by: Greg Kroah-Hartman