kernel/linux.git/include, branch v4.4.139

Bluetooth: Fix connection if directed advertising and privacy is used

2018-07-03T09:21:35+00:00

commit 082f2300cfa1a3d9d5221c38c5eba85d4ab98bd8 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by: Szymon Janc Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

block: Fix transfer when chunk sectors exceeds max

2018-07-03T09:21:35+00:00

commit 15bfd21fbc5d35834b9ea383dc458a1f0c9e3434 upstream. A device may have boundary restrictions where the number of sectors between boundaries exceeds its max transfer size. In this case, we need to cap the max size to the smaller of the two limits. Reported-by: Jitendra Bhivare Tested-by: Jitendra Bhivare Cc: Reviewed-by: Martin K. Petersen Signed-off-by: Keith Busch Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

iio:buffer: make length types match kfifo types

2018-07-03T09:21:30+00:00

commit c043ec1ca5baae63726aae32abbe003192bc6eec upstream. Currently, we use int for buffer length and bytes_per_datum. However, kfifo uses unsigned int for length and size_t for element size. We need to make sure these matches or we will have bugs related to overflow (in the range between INT_MAX and UINT_MAX for length, for example). In addition, set_bytes_per_datum uses size_t while bytes_per_datum is an int, which would cause bugs for large values of bytes_per_datum. Change buffer length to use unsigned int and bytes_per_datum to use size_t. Signed-off-by: Martin Kelly Cc: Signed-off-by: Jonathan Cameron [bwh: Backported to 4.4: - Drop change to iio_dma_buffer_set_length() - Adjust filename, context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

branch-check: fix long->int truncation when profiling branches

2018-07-03T09:21:28+00:00

commit 2026d35741f2c3ece73c11eb7e4a15d7c2df9ebe upstream. The function __builtin_expect returns long type (see the gcc documentation), and so do macros likely and unlikely. Unfortunatelly, when CONFIG_PROFILE_ANNOTATED_BRANCHES is selected, the macros likely and unlikely expand to __branch_check__ and __branch_check__ truncates the long type to int. This unintended truncation may cause bugs in various kernel code (we found a bug in dm-writecache because of it), so it's better to fix __branch_check__ to return long. Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1805300818140.24812@file01.intranet.prod.int.rdu2.redhat.com Cc: Ingo Molnar Cc: stable@vger.kernel.org Fixes: 1f0d69a9fc815 ("tracing: profile likely and unlikely annotations") Signed-off-by: Mikulas Patocka Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

Clarify (and fix) MAX_LFS_FILESIZE macros

2018-06-16T07:54:26+00:00

commit 0cc3b0ec23ce4c69e1e890ed2b8d2fa932b14aad upstream. We have a MAX_LFS_FILESIZE macro that is meant to be filled in by filesystems (and other IO targets) that know they are 64-bit clean and don't have any 32-bit limits in their IO path. It turns out that our 32-bit value for that limit was bogus. On 32-bit, the VM layer is limited by the page cache to only 32-bit index values, but our logic for that was confusing and actually wrong. We used to define that value to (((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1) which is actually odd in several ways: it limits the index to 31 bits, and then it limits files so that they can't have data in that last byte of a page that has the highest 31-bit index (ie page index 0x7fffffff). Neither of those limitations make sense. The index is actually the full 32 bit unsigned value, and we can use that whole full page. So the maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG". However, we do wan tto avoid the maximum index, because we have code that iterates over the page indexes, and we don't want that code to overflow. So the maximum size of a file on a 32-bit host should actually be one page less than the full 32-bit index. So the actual limit is ULONG_MAX << PAGE_SHIFT. That means that we will not actually be using the page of that last index (ULONG_MAX), but we can grow a file up to that limit. The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5 volume. It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one byte less), but the actual true VM limit is one page less than 16TiB. This was invisible until commit c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()"), which started applying that MAX_LFS_FILESIZE limit to block devices too. NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is actually just the offset type itself (loff_t), which is signed. But for clarity, on 64-bit, just use the maximum signed value, and don't make people have to count the number of 'f' characters in the hex constant. So just use LLONG_MAX for the 64-bit case. That was what the value had been before too, just written out as a hex constant. Fixes: c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Reported-and-tested-by: Doug Nazar Cc: Andreas Dilger Cc: Mark Fasheh Cc: Joel Becker Cc: Dave Kleikamp Cc: stable@kernel.org Signed-off-by: Linus Torvalds Cc: Rafael Tinoco [backported to 4.4.y due to requests of failed LTP tests - gregkh] Signed-off-by: Greg Kroah-Hartman

tcp: avoid integer overflows in tcp_rcv_space_adjust()

2018-06-06T14:46:21+00:00

commit 607065bad9931e72207b0cac365d7d4abc06bd99 upstream. When using large tcp_rmem[2] values (I did tests with 500 MB), I noticed overflows while computing rcvwin. Lets fix this before the following patch. Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Acked-by: Wei Wang Acked-by: Neal Cardwell Signed-off-by: David S. Miller [Backport: sysctl_tcp_rmem is not Namespace-ify'd in older kernels] Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

cfg80211: further limit wiphy names to 64 bytes

2018-06-06T14:46:21+00:00

commit 814596495dd2b9d4aab92d8f89cf19060d25d2ea upstream. wiphy names were recently limited to 128 bytes by commit a7cfebcb7594 ("cfg80211: limit wiphy names to 128 bytes"). As it turns out though, this isn't sufficient because dev_vprintk_emit() needs the syslog header string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128 bytes. This triggered the "device/subsystem name too long" WARN when the device name was >= 90 bytes. As before, this was reproduced by syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM generic netlink family. Fix it by further limiting wiphy names to 64 bytes. Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com Fixes: a7cfebcb7594 ("cfg80211: limit wiphy names to 128 bytes") Signed-off-by: Eric Biggers Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

usb: gadget: composite: fix incorrect handling of OS desc requests

2018-05-30T05:49:13+00:00

[ Upstream commit 5d6ae4f0da8a64a185074dabb1b2f8c148efa741 ] When handling an OS descriptor request, one of the first operations is to zero out the request buffer using the wLength from the setup packet. There is no bounds checking, so a wLength > 4096 would clobber memory adjacent to the request buffer. Fix this by taking the min of wLength and the request buffer length prior to the memset. While at it, define the buffer length in a header file so that magic numbers don't appear throughout the code. When returning data to the host, the data length should be the min of the wLength and the valid data we have to return. Currently we are returning wLength, thus requests for a wLength greater than the amount of data in the OS descriptor buffer would return invalid (albeit zero'd) data following the valid descriptor data. Fix this by counting the number of bytes when constructing the data and using this when determining the length of the request. Signed-off-by: Chris Dickens Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

llc: properly handle dev_queue_xmit() return value

2018-05-30T05:49:06+00:00

[ Upstream commit b85ab56c3f81c5a24b5a5213374f549df06430da ] llc_conn_send_pdu() pushes the skb into write queue and calls llc_conn_send_pdus() to flush them out. However, the status of dev_queue_xmit() is not returned to caller, in this case, llc_conn_state_process(). llc_conn_state_process() needs hold the skb no matter success or failure, because it still uses it after that, therefore we should hold skb before dev_queue_xmit() when that skb is the one being processed by llc_conn_state_process(). For other callers, they can just pass NULL and ignore the return value as they are. Reported-by: Noam Rathaus Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off

2018-05-30T05:49:05+00:00

[ Upstream commit 4bbb3e0e8239f9079bf1fe20b3c0cb598714ae61 ] When we have a bridge with vlan_filtering on and a vlan device on top of it, packets would be corrupted in skb_vlan_untag() called from br_dev_xmit(). The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(), which makes use of skb->mac_len. In this function mac_len is meant for handling rx path with vlan devices with reorder_header disabled, but in tx path mac_len is typically 0 and cannot be used, which is the problem in this case. The current code even does not properly handle rx path (skb_vlan_untag() called from __netif_receive_skb_core()) with reorder_header off actually. In rx path single tag case, it works as follows: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+------+---- | ETH | VLAN | ETH | | ADDRS | TPID | TCI | TYPE | +-------------------+-------------+------+---- <-------- mac_len ---------> <-------------> to be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <-------- mac_len ---------> This is ok, but in rx double tag case, it corrupts packets: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+-------------+------+---- | ETH | VLAN | VLAN | ETH | | ADDRS | TPID | TCI | TPID | TCI | TYPE | +-------------------+-------------+-------------+------+---- <--------------- mac_len ----------------> <-------------> should be removed <---------------------------> actually will be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <--------------- mac_len ----------------> So, two of vlan tags are both removed while only inner one should be removed and mac_header (and mac_len) is broken. skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2), so use skb->data and skb->mac_header to calculate the right offset. Reported-by: Brandon Carpenter Fixes: a6e18ff11170 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off") Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman