kernel/linux.git/include, branch v4.19.135

dm integrity: fix integrity recalculation that is improperly skipped

2020-07-29T08:16:59+00:00

commit 5df96f2b9f58a5d2dc1f30fe7de75e197f2c25f2 upstream. Commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 ("dm: report suspended device during destroy") broke integrity recalculation. The problem is dm_suspended() returns true not only during suspend, but also during resume. So this race condition could occur: 1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work) 2. integrity_recalc (&ic->recalc_work) preempts the current thread 3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret; 4. integrity_recalc exits and no recalculating is done. To fix this race condition, add a function dm_post_suspending that is only true during the postsuspend phase and use it instead of dm_suspended(). Signed-off-by: Mikulas Patocka Fixes: adc0daad366b ("dm: report suspended device during destroy") Cc: stable vger kernel org # v4.18+ Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

ASoC: rt5670: Add new gpio1_is_ext_spk_en quirk and enable it on the Lenovo Miix 2 10

2020-07-29T08:16:58+00:00

commit 85ca6b17e2bb96b19caac3b02c003d670b66de96 upstream. The Lenovo Miix 2 10 has a keyboard dock with extra speakers in the dock. Rather then the ACL5672's GPIO1 pin being used as IRQ to the CPU, it is actually used to enable the amplifier for these speakers (the IRQ to the CPU comes directly from the jack-detect switch). Add a quirk for having an ext speaker-amplifier enable pin on GPIO1 and replace the Lenovo Miix 2 10's dmi_system_id table entry's wrong GPIO_DEV quirk (which needs to be renamed to GPIO1_IS_IRQ) with the new RT5670_GPIO1_IS_EXT_SPK_EN quirk, so that we enable the external speaker-amplifier as necessary. Also update the ident field for the dmi_system_id table entry, the Miix models are not Thinkpads. Fixes: 67e03ff3f32f ("ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk") Signed-off-by: Hans de Goede BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723 Link: https://lore.kernel.org/r/20200628155231.71089-4-hdegoede@redhat.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

x86, vmlinux.lds: Page-align end of ..page_aligned sections

2020-07-29T08:16:58+00:00

commit de2b41be8fcccb2f5b6c480d35df590476344201 upstream. On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is page-aligned, but the end of the .bss..page_aligned section is not guaranteed to be page-aligned. As a result, objects from other .bss sections may end up on the same 4k page as the idt_table, and will accidentially get mapped read-only during boot, causing unexpected page-faults when the kernel writes to them. This could be worked around by making the objects in the page aligned sections page sized, but that's wrong. Explicit sections which store only page aligned objects have an implicit guarantee that the object is alone in the page in which it is placed. That works for all objects except the last one. That's inconsistent. Enforcing page sized objects for these sections would wreckage memory sanitizers, because the object becomes artificially larger than it should be and out of bound access becomes legit. Align the end of the .bss..page_aligned and .data..page_aligned section on page-size so all objects places in these sections are guaranteed to have their own page. [ tglx: Amended changelog ] Signed-off-by: Joerg Roedel Signed-off-by: Thomas Gleixner Reviewed-by: Kees Cook Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman

io-mapping: indicate mapping failure

2020-07-29T08:16:57+00:00

commit e0b3e0b1a04367fc15c07f44e78361545b55357c upstream. The !ATOMIC_IOMAP version of io_maping_init_wc will always return success, even when the ioremap fails. Since the ATOMIC_IOMAP version returns NULL when the init fails, and callers check for a NULL return on error this is unexpected. During a device probe, where the ioremap failed, a crash can look like this: BUG: unable to handle page fault for address: 0000000000210000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 177 Comm: RIP: 0010:fill_page_dma [i915] gen8_ppgtt_create [i915] i915_ppgtt_create [i915] intel_gt_init [i915] i915_gem_init [i915] i915_driver_probe [i915] pci_device_probe really_probe driver_probe_device The remap failure occurred much earlier in the probe. If it had been propagated, the driver would have exited with an error. Return NULL on ioremap failure. [akpm@linux-foundation.org: detect ioremap_wc() errors earlier] Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping") Signed-off-by: Michael J. Ruhl Signed-off-by: Andrew Morton Reviewed-by: Andrew Morton Cc: Mike Rapoport Cc: Andy Shevchenko Cc: Chris Wilson Cc: Daniel Vetter Cc: Link: http://lkml.kernel.org/r/20200721171936.81563-1-michael.j.ruhl@intel.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

Input: add `SW_MACHINE_COVER`

2020-07-29T08:16:52+00:00

[ Upstream commit c463bb2a8f8d7d97aa414bf7714fc77e9d3b10df ] This event code represents the state of a removable cover of a device. Value 0 means that the cover is open or removed, value 1 means that the cover is closed. Reviewed-by: Sebastian Reichel Acked-by: Tony Lindgren Signed-off-by: Merlijn Wajer Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

rxrpc: Fix trace string

2020-07-22T07:32:13+00:00

commit aadf9dcef9d4cd68c73a4ab934f93319c4becc47 upstream. The trace symbol printer (__print_symbolic()) ignores symbols that map to an empty string and prints the hex value instead. Fix the symbol for rxrpc_cong_no_change to " -" instead of "" to avoid this. Fixes: b54a134a7de4 ("rxrpc: Fix handling of enums-to-string translation in tracing") Signed-off-by: David Howells Signed-off-by: Greg Kroah-Hartman

printk: queue wake_up_klogd irq_work only if per-CPU areas are ready

2020-07-22T07:32:13+00:00

commit ab6f762f0f53162d41497708b33c9a3236d3609e upstream. printk_deferred(), similarly to printk_safe/printk_nmi, does not immediately attempt to print a new message on the consoles, avoiding calls into non-reentrant kernel paths, e.g. scheduler or timekeeping, which potentially can deadlock the system. Those printk() flavors, instead, rely on per-CPU flush irq_work to print messages from safer contexts. For same reasons (recursive scheduler or timekeeping calls) printk() uses per-CPU irq_work in order to wake up user space syslog/kmsg readers. However, only printk_safe/printk_nmi do make sure that per-CPU areas have been initialised and that it's safe to modify per-CPU irq_work. This means that, for instance, should printk_deferred() be invoked "too early", that is before per-CPU areas are initialised, printk_deferred() will perform illegal per-CPU access. Lech Perczak [0] reports that after commit 1b710b1b10ef ("char/random: silence a lockdep splat with printk()") user-space syslog/kmsg readers are not able to read new kernel messages. The reason is printk_deferred() being called too early (as was pointed out by Petr and John). Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU areas are initialized. Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/ Reported-by: Lech Perczak Signed-off-by: Sergey Senozhatsky Tested-by: Jann Horn Reviewed-by: Petr Mladek Cc: Greg Kroah-Hartman Cc: Theodore Ts'o Cc: John Ogness Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

virt: vbox: Fix VBGL_IOCTL_VMMDEV_REQUEST_BIG and _LOG req numbers to match upstream

2020-07-22T07:32:09+00:00

commit f794db6841e5480208f0c3a3ac1df445a96b079e upstream. Until this commit the mainline kernel version (this version) of the vboxguest module contained a bug where it defined VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG using _IOC(_IOC_READ | _IOC_WRITE, 'V', ...) instead of _IO(V, ...) as the out of tree VirtualBox upstream version does. Since the VirtualBox userspace bits are always built against VirtualBox upstream's headers, this means that so far the mainline kernel version of the vboxguest module has been failing these 2 ioctls with -ENOTTY. I guess that VBGL_IOCTL_VMMDEV_REQUEST_BIG is never used causing us to not hit that one and sofar the vboxguest driver has failed to actually log any log messages passed it through VBGL_IOCTL_LOG. This commit changes the VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG defines to match the out of tree VirtualBox upstream vboxguest version, while keeping compatibility with the old wrong request defines so as to not break the kernel ABI in case someone has been using the old request defines. Fixes: f6ddd094f579 ("virt: Add vboxguest driver for Virtual Box Guest integration UAPI") Cc: stable@vger.kernel.org Acked-by: Arnd Bergmann Reviewed-by: Arnd Bergmann Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200709120858.63928-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman

vlan: consolidate VLAN parsing code and limit max parsing depth

2020-07-22T07:32:00+00:00

[ Upstream commit 469aceddfa3ed16e17ee30533fae45e90f62efd8 ] Toshiaki pointed out that we now have two very similar functions to extract the L3 protocol number in the presence of VLAN tags. And Daniel pointed out that the unbounded parsing loop makes it possible for maliciously crafted packets to loop through potentially hundreds of tags. Fix both of these issues by consolidating the two parsing functions and limiting the VLAN tag parsing to a max depth of 8 tags. As part of this, switch over __vlan_get_protocol() to use skb_header_pointer() instead of pskb_may_pull(), to avoid the possible side effects of the latter and keep the skb pointer 'const' through all the parsing functions. v2: - Use limit of 8 tags instead of 32 (matching XMIT_RECURSION_LIMIT) Reported-by: Toshiaki Makita Reported-by: Daniel Borkmann Fixes: d7bf2ebebc2b ("sched: consistently handle layer3 header accesses in the presence of VLANs") Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sched: consistently handle layer3 header accesses in the presence of VLANs

2020-07-22T07:32:00+00:00

[ Upstream commit d7bf2ebebc2bd61ab95e2a8e33541ef282f303d4 ] There are a couple of places in net/sched/ that check skb->protocol and act on the value there. However, in the presence of VLAN tags, the value stored in skb->protocol can be inconsistent based on whether VLAN acceleration is enabled. The commit quoted in the Fixes tag below fixed the users of skb->protocol to use a helper that will always see the VLAN ethertype. However, most of the callers don't actually handle the VLAN ethertype, but expect to find the IP header type in the protocol field. This means that things like changing the ECN field, or parsing diffserv values, stops working if there's a VLAN tag, or if there are multiple nested VLAN tags (QinQ). To fix this, change the helper to take an argument that indicates whether the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we make sure to skip all of them, so behaviour is consistent even in QinQ mode. To make the helper usable from the ECN code, move it to if_vlan.h instead of pkt_sched.h. v3: - Remove empty lines - Move vlan variable definitions inside loop in skb_protocol() - Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and bpf_skb_ecn_set_ce() v2: - Use eth_type_vlan() helper in skb_protocol() - Also fix code that reads skb->protocol directly - Change a couple of 'if/else if' statements to switch constructs to avoid calling the helper twice Reported-by: Ilya Ponetayev Fixes: d8b9605d2697 ("net: sched: fix skb->protocol use in case of accelerated vlan path") Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman