kernel/linux.git/include, branch v3.4.34

vlan: adjust vlan_set_encap_proto() for its callers

2013-02-28T14:59:06+00:00

[ Upstream commit da8c87241c26aac81a64c7e4d21d438a33018f4e ] There are two places to call vlan_set_encap_proto(): vlan_untag() and __pop_vlan_tci(). vlan_untag() assumes skb->data points after mac addr, otherwise the following code vhdr = (struct vlan_hdr *) skb->data; vlan_tci = ntohs(vhdr->h_vlan_TCI); __vlan_hwaccel_put_tag(skb, vlan_tci); skb_pull_rcsum(skb, VLAN_HLEN); won't be correct. But __pop_vlan_tci() assumes points _before_ mac addr. In vlan_set_encap_proto(), it looks for some magic L2 value after mac addr: rawp = skb->data; if (*(unsigned short *) rawp == 0xFFFF) ... Therefore __pop_vlan_tci() is obviously wrong. A quick fix is avoiding using skb->data in vlan_set_encap_proto(), use 'vhdr+1' is always correct in both cases. Signed-off-by: Cong Wang Cc: David S. Miller Cc: Jesse Gross Acked-by: Jesse Gross Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: use a stronger hash for tcp

2013-02-28T14:59:06+00:00

[ Upstream commit 08dcdbf6a7b9d14c2302c5bd0c5390ddf122f664 ] It looks like its possible to open thousands of TCP IPv6 sessions on a server, all landing in a single slot of TCP hash table. Incoming packets have to lookup sockets in a very long list. We should hash all bits from foreign IPv6 addresses, using a salt and hash mix, not a simple XOR. inet6_ehashfn() can also separately use the ports, instead of xoring them. Reported-by: Neal Cardwell Signed-off-by: Eric Dumazet Cc: Yuchung Cheng Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: fix a compile error when SOCK_REFCNT_DEBUG is enabled

2013-02-28T14:59:06+00:00

[ Upstream commit dec34fb0f5b7873de45132a84a3af29e61084a6b ] When SOCK_REFCNT_DEBUG is enabled, below build error is met: kernel/sysctl_binary.o: In function `sk_refcnt_debug_release': include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release' kernel/sysctl.o:include/net/sock.h:1025: first defined here kernel/audit.o: In function `sk_refcnt_debug_release': include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release' kernel/sysctl.o:include/net/sock.h:1025: first defined here make[1]: *** [kernel/built-in.o] Error 1 make: *** [kernel] Error 2 So we decide to make sk_refcnt_debug_release static to eliminate the error. Signed-off-by: Ying Xue Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

fb: Yet another band-aid for fixing lockdep mess

2013-02-28T14:59:05+00:00

commit e93a9a868792ad71cdd09d75e5a02d8067473c4e upstream. I've still got lockdep warnings even after Alan's patch, and it seems that yet more band aids are required to paper over similar paths for unbind_con_driver() and unregister_con_driver(). After this hack, lockdep warnings are finally gone. Signed-off-by: Takashi Iwai Cc: Alan Cox Cc: Florian Tobias Schandinat Cc: Jiri Kosina Tested-by: Sedat Dilek Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

fb: rework locking to fix lock ordering on takeover

2013-02-28T14:59:05+00:00

commit 50e244cc793d511b86adea24972f3a7264cae114 upstream. Adjust the console layer to allow a take over call where the caller already holds the locks. Make the fb layer lock in order. This is partly a band aid, the fb layer is terminally confused about the locking rules it uses for its notifiers it seems. [akpm@linux-foundation.org: remove stray non-ascii char, tidy comment] [akpm@linux-foundation.org: export do_take_over_console()] [airlied: cleanup another non-ascii char] Signed-off-by: Alan Cox Cc: Florian Tobias Schandinat Cc: Stephen Rothwell Cc: Jiri Kosina Tested-by: Sedat Dilek Reviewed-by: Daniel Vetter Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

vgacon/vt: clear buffer attributes when we load a 512 character font (v2)

2013-02-28T14:59:03+00:00

commit 2a2483072393b27f4336ab068a1f48ca19ff1c1e upstream. When we switch from 256->512 byte font rendering mode, it means the current contents of the screen is being reinterpreted. The bit that holds the high bit of the 9-bit font, may have been previously set, and thus the new font misrenders. The problem case we see is grub2 writes spaces with the bit set, so it ends up with data like 0x820, which gets reinterpreted into 0x120 char which the font translates into G with a circumflex. This flashes up on screen at boot and is quite ugly. A current side effect of this patch though is that any rendering on the screen changes color to a slightly darker color, but at least the screen no longer corrupts. v2: as suggested by hpa, always clear the attribute space, whether we are are going to or from 512 chars. Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

ALSA: usb: Fix Processing Unit Descriptor parsers

2013-02-28T14:59:02+00:00

commit b531f81b0d70ffbe8d70500512483227cc532608 upstream. Commit 99fc86450c439039d2ef88d06b222fd51a779176 "ALSA: usb-mixer: parse descriptors with structs" introduced a set of useful parsers for descriptors. Unfortunately the parses for the Processing Unit Descriptor came with a very subtle bug... Functions uac_processing_unit_iProcessing() and uac_processing_unit_specific() were indexing the baSourceID array forgetting the fields before the iProcessing and process-specific descriptors. The problem was observed with Sound Blaster Extigy mixer, where nNrModes in Up/Down-mix Processing Unit Descriptor was accessed at offset 10 of the descriptor (value 0) instead of offset 15 (value 7). In result the resulting control had interesting limit values: Simple mixer control 'Channel Routing Mode Select',0 Capabilities: volume volume-joined penum Playback channels: Mono Capture channels: Mono Limits: 0 - -1 Mono: -1 [100%] Fixed by starting from the bmControls, which was calculated correctly, instead of baSourceID. Now the mentioned control is fine: Simple mixer control 'Channel Routing Mode Select',0 Capabilities: volume volume-joined penum Playback channels: Mono Capture channels: Mono Limits: 0 - 6 Mono: 0 [0%] Signed-off-by: Pawel Moll Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

mm: mmu_notifier: have mmu_notifiers use a global SRCU so they may safely schedule

2013-02-28T14:59:00+00:00

commit 21a92735f660eaecf69a6f2e777f18463760ec32 upstream. With an RCU based mmu_notifier implementation, any callout to mmu_notifier_invalidate_range_{start,end}() or mmu_notifier_invalidate_page() would not be allowed to call schedule() as that could potentially allow a modification to the mmu_notifier structure while it is currently being used. Since srcu allocs 4 machine words per instance per cpu, we may end up with memory exhaustion if we use srcu per mm. So all mms share a global srcu. Note that during large mmu_notifier activity exit & unregister paths might hang for longer periods, but it is tolerable for current mmu_notifier clients. Signed-off-by: Sagi Grimberg Signed-off-by: Andrea Arcangeli Cc: Peter Zijlstra Cc: Haggai Eran Cc: "Paul E. McKenney" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

printk: fix buffer overflow when calling log_prefix function from call_console_drivers

2013-02-21T18:04:57+00:00

This patch corrects a buffer overflow in kernels from 3.0 to 3.4 when calling log_prefix() function from call_console_drivers(). This bug existed in previous releases but has been revealed with commit 162a7e7500f9664636e649ba59defe541b7c2c60 (2.6.39 => 3.0) that made changes about how to allocate memory for early printk buffer (use of memblock_alloc). It disappears with commit 7ff9554bb578ba02166071d2d487b7fc7d860d62 (3.4 => 3.5) that does a refactoring of printk buffer management. In log_prefix(), the access to "p[0]", "p[1]", "p[2]" or "simple_strtoul(&p[1], &endp, 10)" may cause a buffer overflow as this function is called from call_console_drivers by passing "&LOG_BUF(cur_index)" where the index must be masked to do not exceed the buffer's boundary. The trick is to prepare in call_console_drivers() a buffer with the necessary data (PRI field of syslog message) to be safely evaluated in log_prefix(). This patch can be applied to stable kernel branches 3.0.y, 3.2.y and 3.4.y. Without this patch, one can freeze a server running this loop from shell : $ export DUMMY=`cat /dev/urandom | tr -dc '12345AZERTYUIOPQSDFGHJKLMWXCVBNazertyuiopqsdfghjklmwxcvbn' | head -c255` $ while true do ; echo $DUMMY > /dev/kmsg ; done The "server freeze" depends on where memblock_alloc does allocate printk buffer : if the buffer overflow is inside another kernel allocation the problem may not be revealed, else the server may hangs up. Signed-off-by: Alexandre SIMON Signed-off-by: Greg Kroah-Hartman

efi: Make 'efi_enabled' a function to query EFI facilities

2013-02-14T18:48:53+00:00

commit 83e68189745ad931c2afd45d8ee3303929233e7f upstream. Originally 'efi_enabled' indicated whether a kernel was booted from EFI firmware. Over time its semantics have changed, and it now indicates whether or not we are booted on an EFI machine with bit-native firmware, e.g. 64-bit kernel with 64-bit firmware. The immediate motivation for this patch is the bug report at, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 which details how running a platform driver on an EFI machine that is designed to run under BIOS can cause the machine to become bricked. Also, the following report, https://bugzilla.kernel.org/show_bug.cgi?id=47121 details how running said driver can also cause Machine Check Exceptions. Drivers need a new means of detecting whether they're running on an EFI machine, as sadly the expression, if (!efi_enabled) hasn't been a sufficient condition for quite some time. Users actually want to query 'efi_enabled' for different reasons - what they really want access to is the list of available EFI facilities. For instance, the x86 reboot code needs to know whether it can invoke the ResetSystem() function provided by the EFI runtime services, while the ACPI OSL code wants to know whether the EFI config tables were mapped successfully. There are also checks in some of the platform driver code to simply see if they're running on an EFI machine (which would make it a bad idea to do BIOS-y things). This patch is a prereq for the samsung-laptop fix patch. Signed-off-by: Matt Fleming Cc: David Airlie Cc: Corentin Chary Cc: Matthew Garrett Cc: Dave Jiang Cc: Olof Johansson Cc: Peter Jones Cc: Colin Ian King Cc: Steve Langasek Cc: Tony Luck Cc: Konrad Rzeszutek Wilk Cc: Rafael J. Wysocki Signed-off-by: H. Peter Anvin Signed-off-by: Greg Kroah-Hartman