kernel/linux.git/include, branch v3.4.18

efi: Defer freeing boot services memory until after ACPI init

2012-10-31T17:03:18+00:00

commit 785107923a83d8456bbd8564e288a24d84109a46 upstream. Some new ACPI 5.0 tables reference resources stored in boot services memory, so keep that memory around until we have ACPI and can extract data from it. Signed-off-by: Josh Triplett Link: http://lkml.kernel.org/r/baaa6d44bdc4eb0c58e5d1b4ccd2c729f854ac55.1348876882.git.josh@joshtriplett.org Signed-off-by: H. Peter Anvin Cc: Matt Fleming Signed-off-by: Greg Kroah-Hartman

x86, mm: Trim memory in memblock to be page aligned

2012-10-31T17:02:56+00:00

commit 6ede1fd3cb404c0016de6ac529df46d561bd558b upstream. We will not map partial pages, so need to make sure memblock allocation will not allocate those bytes out. Also we will use for_each_mem_pfn_range() to loop to map memory range to keep them consistent. Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/CAE9FiQVZirvaBMFYRfXMmWEcHbKSicQEHz4VAwUv0xFCk51ZNw@mail.gmail.com Acked-by: Jacob Shin Signed-off-by: H. Peter Anvin Signed-off-by: Greg Kroah-Hartman

drm/radeon: add some new SI PCI ids

2012-10-31T17:02:32+00:00

commit b6aa22db7857ab7ed042d6c56b800bfc727cfdff upstream. Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver

2012-10-28T17:14:16+00:00

commit bf7a01bf7987b63b121d572b240c132ec44129c4 upstream. The NAND_CHIPOPTIONS_MSK has limited utility and is causing real bugs. It silently masks off at least one flag that might be set by the driver (NAND_NO_SUBPAGE_WRITE). This breaks the GPMI NAND driver and possibly others. Really, as long as driver writers exercise a small amount of care with NAND_* options, this mask is not necessary at all; it was only here to prevent certain options from accidentally being set by the driver. But the original thought turns out to be a bad idea occasionally. Thus, kill it. Note, this patch fixes some major gpmi-nand breakage. Signed-off-by: Brian Norris Tested-by: Huang Shijie Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman

vlan: don't deliver frames for unknown vlans to protocols

2012-10-28T17:14:15+00:00

[ Upstream commit 48cc32d38a52d0b68f91a171a8d00531edc6a46e ] 6a32e4f9dd9219261f8856f817e6655114cfec2f made the vlan code skip marking vlan-tagged frames for not locally configured vlans as PACKET_OTHERHOST if there was an rx_handler, as the rx_handler could cause the frame to be received on a different (virtual) vlan-capable interface where that vlan might be configured. As rx_handlers do not necessarily return RX_HANDLER_ANOTHER, this could cause frames for unknown vlans to be delivered to the protocol stack as if they had been received untagged. For example, if an ipv6 router advertisement that's tagged for a locally not configured vlan is received on an interface with macvlan interfaces attached, macvlan's rx_handler returns RX_HANDLER_PASS after delivering the frame to the macvlan interfaces, which caused it to be passed to the protocol stack, leading to ipv6 addresses for the announced prefix being configured even though those are completely unusable on the underlying interface. The fix moves marking as PACKET_OTHERHOST after the rx_handler so the rx_handler, if there is one, sees the frame unchanged, but afterwards, before the frame is delivered to the protocol stack, it gets marked whether there is an rx_handler or not. Signed-off-by: Florian Zumbiehl Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

infiniband: pass rdma_cm module to netlink_dump_start

2012-10-28T17:14:15+00:00

[ Upstream commit 809d5fc9bf6589276a12bd4fd611e4c7ff9940c3 ] set netlink_dump_control.module to avoid panic. Signed-off-by: Gao feng Cc: Roland Dreier Cc: Sean Hefty Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

netlink: add reference of module in netlink_dump_start

2012-10-28T17:14:15+00:00

[ Upstream commit 6dc878a8ca39e93f70c42f3dd7260bde10c1e0f1 ] I get a panic when I use ss -a and rmmod inet_diag at the same time. It's because netlink_dump uses inet_diag_dump which belongs to module inet_diag. I search the codes and find many modules have the same problem. We need to add a reference to the module which the cb->dump belongs to. Thanks for all help from Stephen,Jan,Eric,Steffen and Pablo. Change From v3: change netlink_dump_start to inline,suggestion from Pablo and Eric. Change From v2: delete netlink_dump_done,and call module_put in netlink_dump and netlink_sock_destruct. Signed-off-by: Gao feng Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

SUNRPC: Fix a UDP transport regression

2012-10-28T17:14:13+00:00

commit f39c1bfb5a03e2d255451bff05be0d7255298fa4 and commit 84e28a307e376f271505af65a7b7e212dd6f61f4 upstream. Commit 43cedbf0e8dfb9c5610eb7985d5f21263e313802 (SUNRPC: Ensure that we grab the XPRT_LOCK before calling xprt_alloc_slot) is causing hangs in the case of NFS over UDP mounts. Since neither the UDP or the RDMA transport mechanism use dynamic slot allocation, we can skip grabbing the socket lock for those transports. Add a new rpc_xprt_op to allow switching between the TCP and UDP/RDMA case. Note that the NFSv4.1 back channel assigns the slot directly through rpc_run_bc_task, so we can ignore that case. Reported-by: Dick Streefland Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman

ipvs: fix oops on NAT reply in br_nf context

2012-10-21T16:28:00+00:00

commit 9e33ce453f8ac8452649802bee1f410319408f4b upstream. IPVS should not reset skb->nf_bridge in FORWARD hook by calling nf_reset for NAT replies. It triggers oops in br_nf_forward_finish. [ 579.781508] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 579.781669] IP: [] br_nf_forward_finish+0x58/0x112 [ 579.781792] PGD 218f9067 PUD 0 [ 579.781865] Oops: 0000 [#1] SMP [ 579.781945] CPU 0 [ 579.781983] Modules linked in: [ 579.782047] [ 579.782080] [ 579.782114] Pid: 4644, comm: qemu Tainted: G W 3.5.0-rc5-00006-g95e69f9 #282 Hewlett-Packard /30E8 [ 579.782300] RIP: 0010:[] [] br_nf_forward_finish+0x58/0x112 [ 579.782455] RSP: 0018:ffff88007b003a98 EFLAGS: 00010287 [ 579.782541] RAX: 0000000000000008 RBX: ffff8800762ead00 RCX: 000000000001670a [ 579.782653] RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff8800762ead00 [ 579.782845] RBP: ffff88007b003ac8 R08: 0000000000016630 R09: ffff88007b003a90 [ 579.782957] R10: ffff88007b0038e8 R11: ffff88002da37540 R12: ffff88002da01a02 [ 579.783066] R13: ffff88002da01a80 R14: ffff88002d83c000 R15: ffff88002d82a000 [ 579.783177] FS: 0000000000000000(0000) GS:ffff88007b000000(0063) knlGS:00000000f62d1b70 [ 579.783306] CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b [ 579.783395] CR2: 0000000000000004 CR3: 00000000218fe000 CR4: 00000000000027f0 [ 579.783505] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 579.783684] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 579.783795] Process qemu (pid: 4644, threadinfo ffff880021b20000, task ffff880021aba760) [ 579.783919] Stack: [ 579.783959] ffff88007693cedc ffff8800762ead00 ffff88002da01a02 ffff8800762ead00 [ 579.784110] ffff88002da01a02 ffff88002da01a80 ffff88007b003b18 ffffffff817b26c7 [ 579.784260] ffff880080000000 ffffffff81ef59f0 ffff8800762ead00 ffffffff81ef58b0 [ 579.784477] Call Trace: [ 579.784523] [ 579.784562] [ 579.784603] [] br_nf_forward_ip+0x275/0x2c8 [ 579.784707] [] nf_iterate+0x47/0x7d [ 579.784797] [] ? br_dev_queue_push_xmit+0xae/0xae [ 579.784906] [] nf_hook_slow+0x6d/0x102 [ 579.784995] [] ? br_dev_queue_push_xmit+0xae/0xae [ 579.785175] [] ? _raw_write_unlock_bh+0x19/0x1b [ 579.785179] [] __br_forward+0x97/0xa2 [ 579.785179] [] br_handle_frame_finish+0x1a6/0x257 [ 579.785179] [] br_nf_pre_routing_finish+0x26d/0x2cb [ 579.785179] [] br_nf_pre_routing+0x55d/0x5c1 [ 579.785179] [] nf_iterate+0x47/0x7d [ 579.785179] [] ? br_handle_local_finish+0x44/0x44 [ 579.785179] [] nf_hook_slow+0x6d/0x102 [ 579.785179] [] ? br_handle_local_finish+0x44/0x44 [ 579.785179] [] ? sky2_poll+0xb35/0xb54 [ 579.785179] [] br_handle_frame+0x213/0x229 [ 579.785179] [] ? br_handle_frame_finish+0x257/0x257 [ 579.785179] [] __netif_receive_skb+0x2b4/0x3f1 [ 579.785179] [] process_backlog+0x99/0x1e2 [ 579.785179] [] net_rx_action+0xdf/0x242 [ 579.785179] [] __do_softirq+0xc1/0x1e0 [ 579.785179] [] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 579.785179] [] call_softirq+0x1c/0x30 The steps to reproduce as follow, 1. On Host1, setup brige br0(192.168.1.106) 2. Boot a kvm guest(192.168.1.105) on Host1 and start httpd 3. Start IPVS service on Host1 ipvsadm -A -t 192.168.1.106:80 -s rr ipvsadm -a -t 192.168.1.106:80 -r 192.168.1.105:80 -m 4. Run apache benchmark on Host2(192.168.1.101) ab -n 1000 http://192.168.1.106/ ip_vs_reply4 ip_vs_out handle_response ip_vs_notrack nf_reset() { skb->nf_bridge = NULL; } Actually, IPVS wants in this case just to replace nfct with untracked version. So replace the nf_reset(skb) call in ip_vs_notrack() with a nf_conntrack_put(skb->nfct) call. Signed-off-by: Lin Ming Signed-off-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso Acked-by: David Miller Signed-off-by: Greg Kroah-Hartman

netfilter: ipset: fix timeout value overflow bug

2012-10-21T16:28:00+00:00

commit 127f559127f5175e4bec3dab725a34845d956591 upstream. Large timeout parameters could result wrong timeout values due to an overflow at msec to jiffies conversion (reported by Andreas Herz) [ This patch was mangled by Pablo Neira Ayuso since David Laight and Eric Dumazet noticed that we were using hardcoded 1000 instead of MSEC_PER_SEC to calculate the timeout ] Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Acked-by: David Miller Signed-off-by: Greg Kroah-Hartman