kernel/linux.git/include/xen/interface/memory.h, branch v6.6.132

xen: fix wrong SPDX headers of Xen related headers

2021-11-02T12:45:44+00:00

Commit b24413180f5600 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") was meant to do a tree-wide cleanup for files without any license information by adding a SPDX GPL-2.0 line to them. Unfortunately this was applied even to several Xen-related headers which have been originally under the MIT license, but obviously have been copied to the Linux tree from the Xen project without keeping the license boiler plate as required. Correct that by changing the license of those files back to "MIT". Some files still contain the MIT license text. Replace that by the related SPDX line. Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20211015143312.29900-1-jgross@suse.com Signed-off-by: Boris Ostrovsky

x86/xen: Move pv specific parts of arch/x86/xen/mmu.c to mmu_pv.c

2018-09-03T14:50:33+00:00

There are some PV specific functions in arch/x86/xen/mmu.c which can be moved to mmu_pv.c. This in turn enables to build multicalls.c dependent on CONFIG_XEN_PV. Signed-off-by: Juergen Gross Signed-off-by: Thomas Gleixner Reviewed-by: Boris Ostrovsky Cc: xen-devel@lists.xenproject.org Cc: virtualization@lists.linux-foundation.org Cc: akataria@vmware.com Cc: rusty@rustcorp.com.au Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20180828074026.820-3-jgross@suse.com

xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE

2018-05-14T13:25:37+00:00

My recent Xen patch series introduces a new HYPERVISOR_memory_op to support direct priv-mapping of certain guest resources (such as ioreq pages, used by emulators) by a tools domain, rather than having to access such resources via the guest P2M. This patch adds the necessary infrastructure to the privcmd driver and Xen MMU code to support direct resource mapping. NOTE: The adjustment in the MMU code is partially cosmetic. Xen will now allow a PV tools domain to map guest pages either by GFN or MFN, thus the term 'mfn' has been swapped for 'pfn' in the lower layers of the remap code. Signed-off-by: Paul Durrant Reviewed-by: Boris Ostrovsky Signed-off-by: Juergen Gross

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

xen: memory : Add new XENMAPSPACE type XENMAPSPACE_dev_mmio

2016-07-06T09:34:43+00:00

Add a new type of Xen map space for Dom0 to map device's MMIO region. Signed-off-by: Shannon Zhao Reviewed-by: Julien Grall Tested-by: Julien Grall

xen: implement updated XENMEM_add_to_physmap_range ABI

2013-02-20T03:01:55+00:00

Allows for more fine grained error reporting. Only used by PVH and ARM both of which are marked EXPERIMENTAL precisely because the ABI is not yet stable Signed-off-by: Ian Campbell [v1: Rebased without PVH patches] Signed-off-by: Konrad Rzeszutek Wilk

xen: arm: implement remap interfaces needed for privcmd mappings.

2012-11-29T14:00:19+00:00

We use XENMEM_add_to_physmap_range which is the preferred interface for foreign mappings. Acked-by: Mukesh Rathor Acked-by: Stefano Stabellini Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk

xen: XENMEM_translate_gpfn_list was remove ages ago and is unused.

2012-10-19T19:17:52+00:00

Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk

xen/arm: Introduce xen_ulong_t for unsigned long

2012-09-14T13:34:43+00:00

All the original Xen headers have xen_ulong_t as unsigned long type, however when they have been imported in Linux, xen_ulong_t has been replaced with unsigned long. That might work for x86 and ia64 but it does not for arm. Bring back xen_ulong_t and let each architecture define xen_ulong_t as they see fit. Also explicitly size pointers (__DEFINE_GUEST_HANDLE) to 64 bit. Changes in v3: - remove the incorrect changes to multicall_entry; - remove the change to apic_physbase. Signed-off-by: Stefano Stabellini Acked-by: Konrad Rzeszutek Wilk

xen: Introduce xen_pfn_t for pfn and mfn types

2012-08-23T14:18:17+00:00

All the original Xen headers have xen_pfn_t as mfn and pfn type, however when they have been imported in Linux, xen_pfn_t has been replaced with unsigned long. That might work for x86 and ia64 but it does not for arm. Bring back xen_pfn_t and let each architecture define xen_pfn_t as they see fit. Signed-off-by: Stefano Stabellini Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Konrad Rzeszutek Wilk