kernel/linux.git/include/uapi/linux/usb, branch v6.18.21

Merge tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2025-04-03T01:23:31+00:00

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.15-rc1. Included in here are: - Thunderbolt driver and core api updates for new hardware and features - usb-storage const array cleanups - typec driver updates - dwc3 driver updates - xhci driver updates and bugfixes - small USB documentation updates - usb cdns3 driver updates - usb gadget driver updates - other small driver updates and fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits) thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer thunderbolt: Scan retimers after device router has been enumerated usb: host: cdns3: forward lost power information to xhci usb: host: xhci-plat: allow upper layers to signal power loss usb: xhci: change xhci_resume() parameters to explicit the desired info usb: cdns3-ti: run HW init at resume() if HW was reset usb: cdns3-ti: move reg writes to separate function usb: cdns3: call cdns_power_is_lost() only once in cdns_resume() usb: cdns3: rename hibernated argument of role->resume() to lost_power usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime` usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func usb: dwc3: Don't use %pK through printk usb: core: Don't use %pK through printk usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev() dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running usb: xhci: Don't change the status of stalled TDs on failed Stop EP xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint xhci: Handle spurious events on Etron host isoc enpoints ...

Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2025-03-27T04:48:21+00:00

Pull networking updates from Jakub Kicinski: "Core & protocols: - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls) - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API: - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers: - Remove the IBM LCS driver for s390 - Remove the sb1000 cable modem driver - Add support for SFP module access over SMBus - Add MCTP transport driver for MCTP-over-USB - Enable XDP metadata support in multiple drivers - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7" * tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits) unix: fix up for "apparmor: add fine grained af_unix mediation" mctp: Fix incorrect tx flow invalidation condition in mctp-i2c net: usb: asix: ax88772: Increase phy_name size net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string net: libwx: fix Tx L4 checksum net: libwx: fix Tx descriptor content for some tunnel packets atm: Fix NULL pointer dereference net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus net: phy: aquantia: add essential functions to aqr105 driver net: phy: aquantia: search for firmware-name in fwnode net: phy: aquantia: add probe function to aqr105 for firmware loading net: phy: Add swnode support to mdiobus_scan gve: add XDP DROP and PASS support for DQ gve: update XDP allocation path support RX buffer posting gve: merge packet buffer size fields gve: update GQ RX to use buf_size gve: introduce config-based allocation for XDP gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics ...

media: uvcvideo: implement UVC v1.5 ROI

2025-03-03T17:23:36+00:00

Implement support for ROI as described in UVC 1.5: 4.2.2.1.20 Digital Region of Interest (ROI) Control ROI control is implemented using V4L2 control API as two UVC-specific controls: V4L2_CID_UVC_REGION_OF_INTEREST_RECT and V4L2_CID_UVC_REGION_OF_INTEREST_AUTO. Reviewed-by: Ricardo Ribalda Signed-off-by: Yunke Cao Reviewed-by: Yunke Cao Tested-by: Yunke Cao Reviewed-by: Hans de Goede Signed-off-by: Ricardo Ribalda Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-16-5900a9fed613@chromium.org Signed-off-by: Hans de Goede Signed-off-by: Hans Verkuil [hverkuil: fix control names: "Of" -> "of", "Controls" -> "Ctrls"]

usb: Add base USB MCTP definitions

2025-02-22T00:45:21+00:00

Upcoming changes will add a USB host (and later gadget) driver for the MCTP-over-USB protocol. Add a header that provides common definitions for protocol support: the packet header format and a few framing definitions. Add a define for the MCTP class code, as per https://usb.org/defined-class-codes. Signed-off-by: Jeremy Kerr Acked-by: Greg Kroah-Hartman Link: https://patch.msgid.link/20250221-dev-mctp-usb-v3-1-3353030fe9cc@codeconstruct.com.au Signed-off-by: Jakub Kicinski

USB: core: Add eUSB2 descriptor and parsing in USB core

2025-02-21T09:45:32+00:00

Add support for the 'eUSB2 Isochronous Endpoint Companion Descriptor' introduced in the recent USB 2.0 specification 'USB 2.0 Double Isochronous IN Bandwidth' ECN. It allows embedded USB2 (eUSB2) devices to report and use higher bandwidths for isochronous IN transfers in order to support higher camera resolutions on the lid of laptops and tablets with minimal change to the USB2 protocol. The motivation for expanding USB 2.0 is further clarified in an additional Embedded USB2 version 2.0 (eUSB2v2) supplement to the USB 2.0 specification. It points out this is optimized for performance, power and cost by using the USB 2.0 low-voltage, power efficient PHY and half-duplex link for the asymmetric camera bandwidth needs, avoiding the costly and complex full-duplex USB 3.x symmetric link and gigabit receivers. eUSB2 devices that support the higher isochronous IN bandwidth and the new descriptor can be identified by their device descriptor bcdUSB value of 0x0220 Co-developed-by: Amardeep Rai Signed-off-by: Amardeep Rai Signed-off-by: Kannappan R Co-developed-by: Mathias Nyman Signed-off-by: Mathias Nyman Acked-by: Alan Stern Link: https://lore.kernel.org/r/20250220141339.1939448-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: functionfs: fix spellos

2024-12-04T15:08:34+00:00

Fix typos in documentation as reported by codespell. Fixes: f0175ab51993 ("usb: gadget: f_fs: OS descriptors support") Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver") Signed-off-by: Randy Dunlap Cc: Michal Nazarewicz Cc: Andrzej Pietrasiewicz Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20241128033756.373517-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman

usb: gadget: uvc: configfs: Add frame-based frame format support

2024-10-16T08:45:47+00:00

Add support for frame-based frame format, which can be used to support multiple formats like H264 or H265, in addition to MJPEG and YUV frames. The frame-based format is set to H264 by default, but it can be updated to other formats by modifying the GUID through the guid configfs attribute. Different structures are used for all three formats, as H264 has a different structure compared to MJPEG and uncompressed formats. These structures will be passed to the frame make function based on the active format, using a common frame structure with additional parameters needed only for frame-based formats. These parameters are handled at runtime in the UVC driver. Signed-off-by: Akash Kumar Link: https://lore.kernel.org/r/20240927152138.31416-1-quic_akakum@quicinc.com Signed-off-by: Greg Kroah-Hartman

USB: gadget: f_hid: Add GET_REPORT via userspace IOCTL

2024-08-22T09:25:59+00:00

While supporting GET_REPORT is a mandatory request per the HID specification the current implementation of the GET_REPORT request responds to the USB Host with an empty reply of the request length. However, some USB Hosts will request the contents of feature reports via the GET_REPORT request. In addition, some proprietary HID 'protocols' will expect different data, for the same report ID, to be to become available in the feature report by sending a preceding SET_REPORT to the USB Device that defines what data is to be presented when that feature report is subsequently retrieved via GET_REPORT (with a very fast < 5ms turn around between the SET_REPORT and the GET_REPORT). There are two other patch sets already submitted for adding GET_REPORT support. The first [1] allows for pre-priming a list of reports via IOCTLs which then allows the USB Host to perform the request, with no further userspace interaction possible during the GET_REPORT request. And another [2] which allows for a single report to be setup by userspace via IOCTL, which will be fetched and returned by the kernel for subsequent GET_REPORT requests by the USB Host, also with no further userspace interaction possible. This patch, while loosely based on both the patch sets, differs by allowing the option for userspace to respond to each GET_REPORT request by setting up a poll to notify userspace that a new GET_REPORT request has arrived. To support this, two extra IOCTLs are supplied. The first of which is used to retrieve the report ID of the GET_REPORT request (in the case of having non-zero report IDs in the HID descriptor). The second IOCTL allows for storing report responses in a list for responding to requests. The report responses are stored in a list (it will be either added if it does not exist or updated if it exists already). A flag (userspace_req) can be set to whether subsequent requests notify userspace or not. Basic operation when a GET_REPORT request arrives from USB Host: - If the report ID exists in the list and it is set for immediate return (i.e. userspace_req == false) then response is sent immediately, userspace is not notified - The report ID does not exist, or exists but is set to notify userspace (i.e. userspace_req == true) then notify userspace via poll: - If userspace responds, and either adds or update the response in the list and respond to the host with the contents - If userspace does not respond within the fixed timeout (2500ms) but the report has been set prevously, then send 'old' report contents - If userspace does not respond within the fixed timeout (2500ms) and the report does not exist in the list then send an empty report Note that userspace could 'prime' the report list at any other time. While this patch allows for flexibility in how the system responds to requests, and therefore the HID 'protocols' that could be supported, a drawback is the time it takes to service the requests and therefore the maximum throughput that would be achievable. The USB HID Specification v1.11 itself states that GET_REPORT is not intended for periodic data polling, so this limitation is not severe. Testing on an iMX8M Nano Ultra Lite with a heavy multi-core CPU loading showed that userspace can typically respond to the GET_REPORT request within 1200ms - which is well within the 5000ms most operating systems seem to allow, and within the 2500ms set by this patch. [1] https://lore.kernel.org/all/20220805070507.123151-2-sunil@amarulasolutions.com/ [2] https://lore.kernel.org/all/20220726005824.2817646-1-vi@endrift.com/ Signed-off-by: David Sands Signed-off-by: Chris Wulff Link: https://lore.kernel.org/r/20240817142850.1311460-2-crwulff@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: add capability for dfu functional descriptor

2024-08-13T08:38:46+00:00

Add the ability for the USB FunctionFS (FFS) gadget driver to be able to create Device Firmware Upgrade (DFU) functional descriptors. [1] This patch allows implementation of DFU in userspace using the FFS gadget. The DFU protocol uses the control pipe (ep0) for all messaging so only the addition of the DFU functional descriptor is needed in the kernel driver. The DFU functional descriptor is written to the ep0 file along with any other descriptors during FFS setup. DFU requires an interface descriptor followed by the DFU functional descriptor. This patch includes documentation of the added descriptor for DFU and conversion of some existing documentation to kernel-doc format so that it can be included in the generated docs. An implementation of DFU 1.1 that implements just the runtime descriptor using the FunctionFS gadget (with rebooting into u-boot for DFU mode) has been tested on an i.MX8 Nano. An implementation of DFU 1.1 that implements both runtime and DFU mode using the FunctionFS gadget has been tested on Xilinx Zynq UltraScale+. Note that for the best performance of firmware update file transfers, the userspace program should respond as quick as possible to the setup packets. [1] https://www.usb.org/sites/default/files/DFU_1.1.pdf Signed-off-by: David Sands Co-developed-by: Chris Wulff Signed-off-by: Chris Wulff Link: https://lore.kernel.org/r/20240811000004.1395888-2-crwulff@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: functionfs: Add DMABUF import interface

2024-02-17T16:00:09+00:00

This patch introduces three new ioctls. They all should be called on a data endpoint (ie. not ep0). They are: - FUNCTIONFS_DMABUF_ATTACH, which takes the file descriptor of a DMABUF object to attach to the endpoint. - FUNCTIONFS_DMABUF_DETACH, which takes the file descriptor of the DMABUF to detach from the endpoint. Note that closing the endpoint's file descriptor will automatically detach all attached DMABUFs. - FUNCTIONFS_DMABUF_TRANSFER, which requests a data transfer from / to the given DMABUF. Its argument is a structure that packs the DMABUF's file descriptor, the size in bytes to transfer (which should generally be set to the size of the DMABUF), and a 'flags' field which is unused for now. Before this ioctl can be used, the related DMABUF must be attached with FUNCTIONFS_DMABUF_ATTACH. These three ioctls enable the FunctionFS code to transfer data between the USB stack and a DMABUF object, which can be provided by a driver from a completely different subsystem, in a zero-copy fashion. Signed-off-by: Paul Cercueil Acked-by: Daniel Vetter Acked-by: Christian König Link: https://lore.kernel.org/r/20240130122340.54813-4-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman