kernel/linux.git/include/uapi/linux/serial_reg.h, branch v6.6.132

serial: 8250: Define IIR 64 byte bit & cleanup related code

2023-01-19T14:01:20+00:00

16750 indicates 64 bytes FIFO with a IIR bit. Add define for it and make related code more obvious. Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20221125130509.8482-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: 8250: Add IIR FIFOs enabled field properly

2023-01-19T14:01:20+00:00

Don't use magic literals & comments but define a real field instead for UART_IIR_FIFO_ENABLED and name also the values. Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20221125130509.8482-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: Use bits for UART_LSR_BRK_ERROR_BITS/MSR_ANY_DELTA

2022-06-27T12:41:31+00:00

Instead of listing the bits for UART_LSR_BRK_ERROR_BITS and UART_MSR_ANY_DELTA in comment, use them to define instead. Reviewed-by: Jiri Slaby Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220624205424.12686-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: 8250: Define RX trigger levels for OxSemi 950 devices

2021-07-27T10:05:46+00:00

Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in the enhanced (650) mode, which we select in `autoconfig_has_efr' with the ECB bit set in the EFR register, they support the receive interrupt trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112, 120. This applies to the original OX16C950 discrete UART[1] as well as 950 cores embedded into more complex devices. For these devices we set the default to 112, which sets an excessively high level of 112 or 7/8 of the FIFO capacity, unlike with other port types where we choose at most 1/2 of their respective FIFO capacities. Additionally we don't make the trigger level configurable. Consequently frequent input overruns happen with high bit rates where hardware flow control cannot be used (e.g. terminal applications) even with otherwise highly-performant systems. Lower the default receive interrupt trigger level to 32 then, and make it configurable. Document the trigger levels along with other port types, including the set of 16, 32, 64, 112 for the transmit interrupt as well[2]. References: [1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger Levels", p. 22 [2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22 Signed-off-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2017-11-14T05:05:31+00:00

Pull tty/serial updates from Greg KH: "Here is the big tty/serial driver pull request for 4.15-rc1. Lots of serial driver updates in here, some small vt cleanups, and a raft of SPDX and license boilerplate cleanups, messing up the diffstat a bit. Nothing major, with no realy functional changes except better hardware support for some platforms. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits) tty: ehv_bytechan: fix spelling mistake tty: serial: meson: allow baud-rates lower than 9600 serial: 8250_fintek: Fix crash with baud rate B0 serial: 8250_fintek: Disable delays for ports != 0 serial: 8250_fintek: Return -EINVAL on invalid configuration tty: Remove redundant license text tty: serdev: Remove redundant license text tty: hvc: Remove redundant license text tty: serial: Remove redundant license text tty: add SPDX identifiers to all remaining files in drivers/tty/ tty: serial: jsm: remove redundant pointer ts tty: serial: jsm: add space before the open parenthesis '(' tty: serial: jsm: fix coding style tty: serial: jsm: delete space between function name and '(' tty: serial: jsm: add blank line after declarations tty: serial: jsm: change the type of local variable tty: serial: imx: remove dead code imx_dma_rxint tty: serial: imx: disable ageing timer interrupt if dma in use serial: 8250: fix potential deadlock in rs485-mode serial: m32r_sio: Drop redundant .data assignment ...

License cleanup: add SPDX license identifier to uapi header files with a license

2017-11-02T10:20:11+00:00

Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

serial: Add define for max baud rate divisor

2017-10-04T08:17:27+00:00

Add a define for the maximum baud rate divisor, to improve code readability. Signed-off-by: Ed Blake Signed-off-by: Greg Kroah-Hartman

serial: exar: Move register defines from uapi header to consumer site

2017-02-10T14:13:26+00:00

None of these registers is relevant for the userspace API. Signed-off-by: Jan Kiszka Signed-off-by: Greg Kroah-Hartman

serial: exar: Fix feature control register constants

2017-02-10T14:12:38+00:00

According to the XR17V352 manual, bit 4 is IrDA control and bit 5 for 485. Fortunately, no driver used them so far. Signed-off-by: Jan Kiszka Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

serial: 8250: Add new port type for TI DA8xx/66AK2x

2017-01-12T10:51:25+00:00

This adds a new UART port type for TI DA8xx/OMAPL13x/AM17xx/AM18xx/66AK2x. These SoCs have standard 8250 registers plus some extra non-standard registers. The UART will not function unless the non-standard Power and Emulation Management Register (PWREMU_MGMT) is configured correctly. This is currently handled in arch/arm/mach-davinci/serial.c for non-device-tree boards. Making this part of the UART driver will allow UART to work on device-tree boards as well and the mach code can eventually be removed. Signed-off-by: David Lechner Acked-by: Sekhar Nori Signed-off-by: Greg Kroah-Hartman