kernel/linux.git/include/uapi/linux/serial_core.h, branch v6.6.132

serial: 8250_bcm7271: improve bcm7271 8250 port

2023-08-22T13:30:59+00:00

The 8250 BCM7271 UART is not a direct match to PORT_16550A and other generic ports do not match its hardware capabilities. PORT_ALTR matches the rx trigger levels, but its vendor configurations are not compatible. Unfortunately this means we need to create another port to fully capture the hardware capabilities of the BCM7271 UART. To alleviate some latency pressures, we default the rx trigger level to 8. Signed-off-by: Justin Chen Reviewed-by: Florian Fainelli Acked-by: Doug Berger Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/1692643978-16570-1-git-send-email-justin.chen@broadcom.com Signed-off-by: Greg Kroah-Hartman

serial: core: Remove unused PORT_* definitions

2023-08-22T12:59:43+00:00

For the last couple of years Linux kernel got rid of a few architectures and many platforms. Hence some PORT_* definitions in the serial_core.h become unused and redundant. Remove them for good. Removed IDs are checked for users against Debian Code Search engine. Hence safe to remove as there are no consumers found (only providers). While at it, add a note about 0-13, that are defined in the other file. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230821083857.1065282-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_pci1xxxx: Add driver for quad-uart support

2023-02-08T12:10:15+00:00

pci1xxxx is a PCIe switch with a multi-function endpoint on one of its downstream ports. Quad-uart is one of the functions in the multi-function endpoint. This driver loads for the quad-uart and enumerates single or multiple instances of uart based on the PCIe subsystem device ID. Co-developed-by: Tharun Kumar P Signed-off-by: Tharun Kumar P Signed-off-by: Kumaravel Thiagarajan Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230207164814.3104605-3-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman

serial: remove VR41XX serial driver

2022-07-16T06:16:01+00:00

Commit d3164e2f3b0a ("MIPS: Remove VR41xx support") removed support for MIPS VR41xx platform, so remove exclusive drivers for this platform, too. Signed-off-by: Thomas Bogendoerfer Link: https://lore.kernel.org/r/20220715140322.135825-1-tsbogend@alpha.franken.de Signed-off-by: Greg Kroah-Hartman

serial: sunplus-uart: Add Sunplus SoC UART Driver

2022-02-26T09:03:21+00:00

Add Sunplus SoC UART Driver. SP7021 UART block contains 5 UARTs. There are UART0~4 that supported in SP7021, the features list as below. Support Full-duplex communication. Support data packet length configurable. Support stop bit number configurable. Support force break condition. Support baud rate configurable. Support error detection and report. Support RXD Noise Rejection Vote configurable. UART0 pinout only support TX/RX two pins. UART1 to UART4 pinout support TX/RX/CTS/RTS four pins. Normally UART0 used for kernel console, also can be used for normal uart. Command line set "console=ttySUP0,115200", SUP means Sunplus Uart Port. UART driver probe will create path named "/dev/ttySUPx". https://sunplus.atlassian.net/wiki/spaces/doc/pages/1873412290/13.+Universal+Asynchronous+Receiver+Transmitter+UART Signed-off-by: Hammer Hsieh Link: https://lore.kernel.org/r/1645522563-17183-3-git-send-email-hammerh0314@gmail.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type

2022-02-21T18:48:34+00:00

Commit 54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping") fixed a bug that had, as a side-effect, prevented the 8250_aspeed_vuart driver from enabling the VUART's FIFOs. However, fixing that (and hence enabling the FIFOs) has in turn revealed what appears to be a hardware bug in the ASPEED VUART in which the host-side THRE bit doesn't get if the BMC-side receive FIFO trigger level is set to anything but one byte. This causes problems for polled-mode writes from the host -- for example, Linux kernel console writes proceed at a glacial pace (less than 100 bytes per second) because the write path waits for a 10ms timeout to expire after every character instead of being able to continue on to the next character upon seeing THRE asserted. (GRUB behaves similarly.) As a workaround, introduce a new port type for the ASPEED VUART that's identical to PORT_16550A as it had previously been using, but with UART_FCR_R_TRIG_00 instead to set the receive FIFO trigger level to one byte, which (experimentally) seems to avoid the problematic THRE behavior. Fixes: 54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping") Tested-by: Konstantin Aladyshev Reviewed-by: Andy Shevchenko Signed-off-by: Zev Weiss Link: https://lore.kernel.org/r/20220211004203.14915-1-zev@bewilderbeest.net Signed-off-by: Greg Kroah-Hartman

tty: serial: Drop unused efm32 serial driver

2021-01-15T16:14:49+00:00

Support for this machine was just removed, so drop the now unused UART driver, too. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20210115155130.185010-7-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

tty: serial: remove pnx8xxx uart driver

2020-11-06T16:04:36+00:00

Commit 625326ea9c84 ("MIPS: Remove PNX833x alias NXP_STB22x") removed support for PNX833x, so it's time to remove serial driver, too. Signed-off-by: Thomas Bogendoerfer Link: https://lore.kernel.org/r/20201106130332.103476-1-tsbogend@alpha.franken.de Signed-off-by: Greg Kroah-Hartman

serial: Remove duplicated macro definition of port type

2020-07-06T12:06:08+00:00

There exists the same macro definition of port type from 0 to 13 in include/uapi/linux/serial.h, remove these duplicated code in include/uapi/linux/serial_core.h which includes the former header. Acked-by: Jiri Slaby Signed-off-by: Tiezhu Yang Link: https://lore.kernel.org/r/1588853015-28392-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Greg Kroah-Hartman

serial: fsl_linflexuart: Be consistent with the name

2019-10-16T13:11:24+00:00

For consistency reasons, spell the controller name as "LINFlexD" in comments and documentation. Signed-off-by: Stefan-Gabriel Mirea Link: https://lore.kernel.org/r/1571230107-8493-4-git-send-email-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman