kernel/linux.git/include/uapi/linux/perf_event.h, branch linux-4.3.y

perf: Add cycles to branch_info

2015-08-04T08:16:57+00:00

Intel Skylake supports reporting the time in cycles a branch in the LBR took, to give a rough indication of the basic block performance. Export the cycle information in the branch_info structure. This can be done by just reusing some currently zero padding. This is just the generic header change. The architecture still needs to fill it in. There's no attempt to convert to real time, as we really want cycles here. Signed-off-by: Andi Kleen Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: eranian@google.com Link: http://lkml.kernel.org/r/1431285767-27027-5-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar

perf: Add PERF_RECORD_SWITCH to indicate context switches

2015-07-24T01:51:12+00:00

There are already two events for context switches, namely the tracepoint sched:sched_switch and the software event context_switches. Unfortunately neither are suitable for use by non-privileged users for the purpose of synchronizing hardware trace data (e.g. Intel PT) to the context switch. Tracepoints are no good at all for non-privileged users because they need either CAP_SYS_ADMIN or /proc/sys/kernel/perf_event_paranoid <= -1. On the other hand, kernel software events need either CAP_SYS_ADMIN or /proc/sys/kernel/perf_event_paranoid <= 1. Now many distributions do default perf_event_paranoid to 1 making context_switches a contender, except it has another problem (which is also shared with sched:sched_switch) which is that it happens before perf schedules events out instead of after perf schedules events in. Whereas a privileged user can see all the events anyway, a non-privileged user only sees events for their own processes, in other words they see when their process was scheduled out not when it was scheduled in. That presents two problems to use the event: 1. the information comes too late, so tools have to look ahead in the event stream to find out what the current state is 2. if they are unlucky tracing might have stopped before the context-switches event is recorded. This new PERF_RECORD_SWITCH event does not have those problems and it also has a couple of other small advantages. It is easier to use because it is an auxiliary event (like mmap, comm and task events) which can be enabled by setting a single bit. It is smaller than sched:sched_switch and easier to parse. To make the event useful for privileged users also, if the context is cpu-wide then the event record will be PERF_RECORD_SWITCH_CPU_WIDE which is the same as PERF_RECORD_SWITCH except it also provides the next or previous pid/tid. Signed-off-by: Adrian Hunter Acked-by: Peter Zijlstra (Intel) Tested-by: Jiri Olsa Cc: Andi Kleen Cc: Mathieu Poirier Cc: Pawel Moll Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1437471846-26995-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Add time out to force stop proc map processing

2015-06-19T21:20:15+00:00

System wide sampling like 'perf top' or 'perf record -a' read all threads /proc/xxx/maps before sampling. If there are any threads which generating a keeping growing huge maps, perf will do infinite loop during synthesizing. Nothing will be sampled. This patch fixes this issue by adding per-thread timeout to force stop this kind of endless proc map processing. PERF_RECORD_MISC_PROC_MAP_PARSE_TIME_OUT is introduced to indicate that the mmap record are truncated by time out. User will get warning notification when truncated mmap records are detected. Reported-by: Ying Huang Signed-off-by: Kan Liang Cc: Andi Kleen Cc: David Ahern Cc: Ying Huang Link: http://lkml.kernel.org/r/1434549071-25611-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf/x86/intel: Introduce PERF_RECORD_LOST_SAMPLES

2015-06-07T14:09:02+00:00

After enlarging the PEBS interrupt threshold, there may be some mixed up PEBS samples which are discarded by the kernel. This patch makes the kernel emit a PERF_RECORD_LOST_SAMPLES record with the number of possible discarded records when it is impossible to demux the samples. It makes sure the user is not left in the dark about such discards. Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: Andrew Morton Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1431285195-14269-8-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar

perf: add new PERF_SAMPLE_BRANCH_IND_JUMP branch sample type

2015-06-07T14:08:22+00:00

This patch adds a new branch_sample_type flag to enable filtering branch sampling to indirect jumps. The support is subject to hardware or kernel software support on each architecture. Filtering on indirect jump is useful to study the targets of the jump. Signed-off-by: Stephane Eranian Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Andi Kleen Cc: Andrew Morton Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: acme@redhat.com Cc: dsahern@gmail.com Cc: jolsa@redhat.com Cc: kan.liang@intel.com Cc: namhyung@kernel.org Link: http://lkml.kernel.org/r/1431637800-31061-2-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar

perf: Add ITRACE_START record to indicate that tracing has started

2015-04-02T15:14:17+00:00

For counters that generate AUX data that is bound to the context of a running task, such as instruction tracing, the decoder needs to know exactly which task is running when the event is first scheduled in, before the first sched_switch. The decoder's need to know this stems from the fact that instruction flow trace decoding will almost always require program's object code in order to reconstruct said flow and for that we need at least its pid/tid in the perf stream. To single out such instruction tracing pmus, this patch introduces ITRACE PMU capability. The reason this is not part of RECORD_AUX record is that not all pmus capable of generating AUX data need this, and the opposite is *probably* also true. While sched_switch covers for most cases, there are two problems with it: the consumer will need to process events out of order (that is, having found RECORD_AUX, it will have to skip forward to the nearest sched_switch to figure out which task it was, then go back to the actual trace to decode it) and it completely misses the case when the tracing is enabled and disabled before sched_switch, for example, via PERF_EVENT_IOC_DISABLE. Signed-off-by: Alexander Shishkin Signed-off-by: Peter Zijlstra (Intel) Cc: Borislav Petkov Cc: Frederic Weisbecker Cc: H. Peter Anvin Cc: Kaixu Xia Cc: Linus Torvalds Cc: Mike Galbraith Cc: Paul Mackerras Cc: Robert Richter Cc: Stephane Eranian Cc: Thomas Gleixner Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-15-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar

perf: Add wakeup watermark control to the AUX area

2015-04-02T15:14:16+00:00

When AUX area gets a certain amount of new data, we want to wake up userspace to collect it. This adds a new control to specify how much data will cause a wakeup. This is then passed down to pmu drivers via output handle's "wakeup" field, so that the driver can find the nearest point where it can generate an interrupt. We repurpose __reserved_2 in the event attribute for this, even though it was never checked to be zero before, aux_watermark will only matter for new AUX-aware code, so the old code should still be fine. Signed-off-by: Alexander Shishkin Signed-off-by: Peter Zijlstra (Intel) Cc: Borislav Petkov Cc: Frederic Weisbecker Cc: H. Peter Anvin Cc: Kaixu Xia Cc: Linus Torvalds Cc: Mike Galbraith Cc: Paul Mackerras Cc: Robert Richter Cc: Stephane Eranian Cc: Thomas Gleixner Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-10-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar

perf: Support overwrite mode for the AUX area

2015-04-02T15:14:15+00:00

This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin Signed-off-by: Peter Zijlstra (Intel) Cc: Borislav Petkov Cc: Frederic Weisbecker Cc: H. Peter Anvin Cc: Kaixu Xia Cc: Linus Torvalds Cc: Mike Galbraith Cc: Paul Mackerras Cc: Robert Richter Cc: Stephane Eranian Cc: Thomas Gleixner Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar

perf: Add AUX record

2015-04-02T15:14:12+00:00

When there's new data in the AUX space, output a record indicating its offset and size and a set of flags, such as PERF_AUX_FLAG_TRUNCATED, to mean the described data was truncated to fit in the ring buffer. Signed-off-by: Alexander Shishkin Signed-off-by: Peter Zijlstra (Intel) Cc: Arnaldo Carvalho de Melo Cc: Borislav Petkov Cc: Frederic Weisbecker Cc: H. Peter Anvin Cc: Kaixu Xia Cc: Linus Torvalds Cc: Mike Galbraith Cc: Paul Mackerras Cc: Robert Richter Cc: Stephane Eranian Cc: Thomas Gleixner Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-7-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar

perf: Add AUX area to ring buffer for raw data streams

2015-04-02T15:13:46+00:00

This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) Acked-by: Alexander Shishkin Cc: Borislav Petkov Cc: Frederic Weisbecker Cc: H. Peter Anvin Cc: Kaixu Xia Cc: Linus Torvalds Cc: Mike Galbraith Cc: Paul Mackerras Cc: Robert Richter Cc: Stephane Eranian Cc: Thomas Gleixner Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar