kernel/linux.git/include/uapi/linux/nfc.h, branch v6.6.131

nfc: uapi: use kernel size_t to fix user-space builds

2021-12-27T14:58:37+00:00

Fix user-space builds if it includes /usr/include/linux/nfc.h before some of other headers: /usr/include/linux/nfc.h:281:9: error: unknown type name ‘size_t’ 281 | size_t service_name_len; | ^~~~~~ Fixes: d646960f7986 ("NFC: Initial LLCP support") Cc: Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller

uapi: fix linux/nfc.h userspace compilation errors

2021-12-27T14:58:03+00:00

Replace sa_family_t with __kernel_sa_family_t to fix the following linux/nfc.h userspace compilation errors: /usr/include/linux/nfc.h:266:2: error: unknown type name 'sa_family_t' sa_family_t sa_family; /usr/include/linux/nfc.h:274:2: error: unknown type name 'sa_family_t' sa_family_t sa_family; Fixes: 23b7869c0fd0 ("NFC: add the NFC socket raw protocol") Fixes: d646960f7986 ("NFC: Initial LLCP support") Cc: Signed-off-by: Dmitry V. Levin Reviewed-by: Krzysztof Kozlowski Signed-off-by: David S. Miller

NFC: Add NFC_CMD_DEACTIVATE_TARGET support

2017-11-09T23:03:39+00:00

Once an NFC target (i.e., a tag) is found, it remains active until there is a failure reading or writing it (often caused by the target moving out of range). While the target is active, the NFC adapter and antenna must remain powered. This wastes power when the target remains in range but the client application no longer cares whether it is there or not. To mitigate this, add a new netlink command that allows userspace to deactivate an active target. When issued, this command will cause the NFC subsystem to act as though the target was moved out of range. Once the command has been executed, the client application can power off the NFC adapter to reduce power consumption. Signed-off-by: Mark Greer Signed-off-by: Samuel Ortiz

NFC: netlink: Add missing NFC_ATTR comments

2015-10-27T02:55:10+00:00

NFC_CMD_ACTIVATE_TARGET and NFC_ATTR_SE_PARAMS comments are missing. Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz

NFC: netlink: Implement vendor command support

2015-06-08T23:21:35+00:00

Vendor commands are passed from userspace through the NFC_CMD_VENDOR netlink command, allowing driver and hardware specific operations implementations like for example RF tuning or production line calibration. Drivers will associate a set of vendor commands to a vendor id, which could typically be an OUI. The netlink kernel implementation will try to match the received vendor id and sub command attributes with the registered ones. When such match is found, the driver defined sub command routine is called. Signed-off-by: Samuel Ortiz

NFC: Forward NFC_EVT_TRANSACTION to user space

2015-02-02T20:50:40+00:00

NFC_EVT_TRANSACTION is sent through netlink in order for a specific application running on a secure element to notify userspace of an event. Typically the secure element application counterpart on the host could interpret that event and act upon it. Forwarded information contains: - SE host generating the event - Application IDentifier doing the operation - Applications parameters Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz

NFC: NCI: Fix max length of General Bytes in ATR_RES

2014-12-02T21:59:28+00:00

The maximum size of ATR_REQ and ATR_RES is 64 bytes. The maximum number of General Bytes is calculated by the maximum number of data bytes in the ATR_REQ/ATR_RES, substracted by the number of mandatory data bytes. ATR_REQ: 16 mandatory data bytes, giving a maximum of 48 General Bytes. ATR_RES: 17 mandatory data bytes, giving a maximum of 47 General Bytes. Regression introduced in commit a99903ec. Signed-off-by: Julien Lefrique Signed-off-by: Samuel Ortiz

NFC: netlink: Add new netlink command NFC_CMD_ACTIVATE_TARGET

2014-12-02T21:47:37+00:00

Some tag might get deactivated after some read or write tentative. This may happen for example with Mifare Ultralight C tag when trying to read the last 4 blocks (starting block 0x2c) configured as write only. NFC_CMD_ACTIVATE_TARGET will try to reselect the tag in order to detect if it got remove from the field or if it is still present. Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz

NFC: NCI: Handle Target mode activation

2014-11-28T13:07:51+00:00

Changes: * Extract the Listen mode activation parameters from RF_INTF_ACTIVATED_NTF. * Store the General Bytes of ATR_REQ. * Signal that Target mode is activated in case of an activation in NFC-DEP. * Update the NCI state accordingly. * Use the various constants defined in nfc.h. * Fix the ATR_REQ and ATR_RES maximum size. As per NCI 1.0 and NCI 1.1, the Activation Parameters for both Poll and Listen mode contain all the bytes of ATR_REQ/ATR_RES starting and including Byte 3 as defined in [DIGITAL]. In [DIGITAL], the maximum size of ATR_REQ/ATR_RES is 64 bytes and they are numbered starting from Byte 1. Signed-off-by: Julien Lefrique Signed-off-by: Samuel Ortiz

NFC: Add RAW socket type support for SOCKPROTO_RAW

2014-05-19T22:06:04+00:00

This allows for a more generic NFC sniffing by using SOCKPROTO_RAW SOCK_RAW to read RAW NFC frames. This is for sniffing anything but LLCP (HCI, NCI, etc...). Signed-off-by: Hiren Tandel Signed-off-by: Rahul Tank Signed-off-by: Samuel Ortiz