kernel/linux.git/include/uapi/linux/mptcp.h, branch v6.6.132

mptcp: pm: ignore unknown endpoint flags

2026-01-11T14:22:22+00:00

[ Upstream commit 0ace3297a7301911e52d8195cb1006414897c859 ] Before this patch, the kernel was saving any flags set by the userspace, even unknown ones. This doesn't cause critical issues because the kernel is only looking at specific ones. But on the other hand, endpoints dumps could tell the userspace some recent flags seem to be supported on older kernel versions. Instead, ignore all unknown flags when parsing them. By doing that, the userspace can continue to set unsupported flags, but it has a way to verify what is supported by the kernel. Note that it sounds better to continue accepting unsupported flags not to change the behaviour, but also that eases things on the userspace side by adding "optional" endpoint types only supported by newer kernel versions without having to deal with the different kernel versions. A note for the backports: there will be conflicts in mptcp.h on older versions not having the mentioned flags, the new line should still be added last, and the '5' needs to be adapted to have the same value as the last entry. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-1-9e4781a6c1b8@kernel.org Signed-off-by: Jakub Kicinski [ GENMASK(5, 0) => GENMASK(4, 0) + context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mptcp: pm: nl: announce deny-join-id0 flag

2025-09-25T09:00:09+00:00

commit 2293c57484ae64c9a3c847c8807db8c26a3a4d41 upstream. During the connection establishment, a peer can tell the other one that it cannot establish new subflows to the initial IP address and port by setting the 'C' flag [1]. Doing so makes sense when the sender is behind a strict NAT, operating behind a legacy Layer 4 load balancer, or using anycast IP address for example. When this 'C' flag is set, the path-managers must then not try to establish new subflows to the other peer's initial IP address and port. The in-kernel PM has access to this info, but the userspace PM didn't. The RFC8684 [1] is strict about that: (...) therefore the receiver MUST NOT try to open any additional subflows toward this address and port. So it is important to tell the userspace about that as it is responsible for the respect of this flag. When a new connection is created and established, the Netlink events now contain the existing but not currently used 'flags' attribute. When MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 is set, it means no other subflows to the initial IP address and port -- info that are also part of the event -- can be established. Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.1-20.6 [1] Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Reported-by: Marek Majkowski Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/532 Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-2-40171884ade8@kernel.org Signed-off-by: Jakub Kicinski [ Conflicts in mptcp_pm.yaml, and mptcp_pm.h, because these files have been added later by commit bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp"), and commit 9d1ed17f93ce ("uapi: mptcp: use header file generated from YAML spec"), which are not in this version. Applying the same modifications, but only in mptcp.h. Conflict in pm_netlink.c, because of a difference in the context, introduced by commit b9f4554356f6 ("mptcp: annotate lockless access for token"), which is not in this version. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

mptcp: introduce MPTCP_FULL_INFO getsockopt

2023-06-22T05:45:57+00:00

Some user-space applications want to monitor the subflows utilization. Dumping the per subflow tcp_info is not enough, as the PM could close and re-create the subflows under-the-hood, fooling the accounting. Even checking the src/dst addresses used by each subflow could not be enough, because new subflows could re-use the same address/port of the just closed one. This patch introduces a new socket option, allow dumping all the relevant information all-at-once (everything, everywhere...), in a consistent manner. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/388 Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts Signed-off-by: Matthieu Baerts Signed-off-by: Jakub Kicinski

mptcp: track some aggregate data counters

2023-06-22T05:45:57+00:00

Currently there are no data transfer counters accounting for all the subflows used by a given MPTCP socket. The user-space can compute such figures aggregating the subflow info, but that is inaccurate if any subflow is closed before the MPTCP socket itself. Add the new counters in the MPTCP socket itself and expose them via the existing diag and sockopt. While touching mptcp_diag_fill_info(), acquire the relevant locks before fetching the msk data, to ensure better data consistency Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/385 Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts Signed-off-by: Matthieu Baerts Signed-off-by: Jakub Kicinski

mptcp: add pm listener events

2022-12-02T04:06:06+00:00

This patch adds two new MPTCP netlink event types for PM listening socket create and close, named MPTCP_EVENT_LISTENER_CREATED and MPTCP_EVENT_LISTENER_CLOSED. Add a new function mptcp_event_pm_listener() to push the new events with family, port and addr to userspace. Invoke mptcp_event_pm_listener() with MPTCP_EVENT_LISTENER_CREATED in mptcp_listen() and mptcp_pm_nl_create_listen_socket(), invoke it with MPTCP_EVENT_LISTENER_CLOSED in __mptcp_close_ssk(). Signed-off-by: Geliang Tang Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts Signed-off-by: Jakub Kicinski

mptcp: fix conflict with

2022-06-29T03:45:43+00:00

Including before the C library header causes symbol redefinition errors at compile-time due to duplicate declarations and definitions in the header included by . Explicitly include before in when __KERNEL__ is not defined so that the C library compatibility logic in is enabled when including in user space code. Fixes: c11c5906bc0a ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support") Signed-off-by: Ossama Othman Signed-off-by: Mat Martineau Signed-off-by: Jakub Kicinski

mptcp: netlink: allow userspace-driven subflow establishment

2022-05-04T09:49:32+00:00

This allows userspace to tell kernel to add a new subflow to an existing mptcp connection. Userspace provides the token to identify the mptcp-level connection that needs a change in active subflows and the local and remote addresses of the new or the to-be-removed subflow. MPTCP_PM_CMD_SUBFLOW_CREATE requires the following parameters: { token, { loc_id, family, loc_addr4 | loc_addr6 }, { family, rem_addr4 | rem_addr6, rem_port } MPTCP_PM_CMD_SUBFLOW_DESTROY requires the following parameters: { token, { family, loc_addr4 | loc_addr6, loc_port }, { family, rem_addr4 | rem_addr6, rem_port } Acked-by: Paolo Abeni Co-developed-by: Kishen Maloor Signed-off-by: Kishen Maloor Signed-off-by: Florian Westphal Signed-off-by: Mat Martineau Signed-off-by: David S. Miller

mptcp: netlink: Add MPTCP_PM_CMD_REMOVE

2022-05-04T09:49:31+00:00

This change adds a MPTCP netlink command for issuing a REMOVE_ADDR signal for an address over the chosen MPTCP connection from a userspace path manager. The command requires the following parameters: {token, loc_id}. Acked-by: Paolo Abeni Signed-off-by: Kishen Maloor Signed-off-by: Mat Martineau Signed-off-by: David S. Miller

mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE

2022-05-04T09:49:31+00:00

This change adds a MPTCP netlink interface for issuing ADD_ADDR advertisements over the chosen MPTCP connection from a userspace path manager. The command requires the following parameters: { token, { loc_id, family, daddr4 | daddr6 [, dport] } [, if_idx], flags[signal] }. Acked-by: Paolo Abeni Signed-off-by: Kishen Maloor Signed-off-by: Mat Martineau Signed-off-by: David S. Miller

mptcp: expose server_side attribute in MPTCP netlink events

2022-05-03T23:54:55+00:00

This change records the 'server_side' attribute of MPTCP_EVENT_CREATED and MPTCP_EVENT_ESTABLISHED events to inform their recipient about the Client/Server role of the running MPTCP application. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/246 Acked-by: Paolo Abeni Signed-off-by: Kishen Maloor Signed-off-by: Mat Martineau Signed-off-by: Jakub Kicinski