kernel/linux.git/include/uapi/linux/media-bus-format.h, branch v6.6.132

Merge tag 'drm-misc-next-2023-01-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2023-01-04T13:59:25+00:00

drm-misc-next for v6.3: UAPI Changes: * connector: Support analog-TV mode property * media: Add MEDIA_BUS_FMT_RGB565_1X24_CPADHI, MEDIA_BUS_FMT_RGB666_1X18 and MEDIA_BUS_FMT_RGB666_1X24_CPADHI Cross-subsystem Changes: * dma-buf: Documentation fixes * i2c: Introduce i2c_client_get_device_id() helper Core Changes: * Improve support for analog TV output * bridge: Remove unused drm_bridge_chain functions * debugfs: Add per-device helpers and convert various DRM drivers * dp-mst: Various fixes * fbdev emulation: Always pick 32 bpp as default * KUnit: Add tests for managed helpers; Various cleanups * panel-orientation: Add quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50 * TTM: Open-code ttm_bo_wait() and remove the helper Driver Changes: * Fix preferred depth and bpp values throughout DRM drivers * Remove #CONFIG_PM guards throughout DRM drivers * ast: Various fixes * bridge: Implement i2c's probe_new in various drivers; Fixes; ite-it6505: Locking fixes, Cache EDID data; ite-it66121: Support IT6610 chip, Cleanups; lontium-tl9611: Fix HDMI on DragonBoard 845c; parade-ps8640: Use atomic bridge functions * gud: Convert to DRM shadow-plane helpers; Perform flushing synchronously during atomic update * ili9486: Support 16-bit pixel data * imx: Split off IPUv3 driver; Various fixes * mipi-dbi: Convert to DRM shadow-plane helpers plus rsp driver changes;i Support separate I/O-voltage supply * mxsfb: Depend on ARCH_MXS or ARCH_MXC * omapdrm: Various fixes * panel: Use ktime_get_boottime() to measure power-down delay in various drivers; Fix auto-suspend delay in various drivers; orisetech-ota5601a: Add support * sprd: Cleanups * sun4i: Convert to new TV-mode property * tidss: Various fixes * v3d: Various fixes * vc4: Convert to new TV-mode property; Support Kunit tests; Cleanups; dpi: Support RGB565 and RGB666 formats; dsi: Convert DSI driver to bridge * virtio: Improve tracing * vkms: Support small cursors in IGT tests; Various fixes Signed-off-by: Daniel Vetter From: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/Y7QIwlfElAYWxRcR@linux-uq9g

media: uapi: add MEDIA_BUS_FMT_BGR666_1X24_CPADHI

2022-12-01T10:13:56+00:00

Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X24_CPADHI supported by the RaspberryPi. Signed-off-by: Joerg Quinten Reviewed-by: Laurent Pinchart Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-3-eb76e26a772d@cerno.tech Signed-off-by: Maxime Ripard

media: uapi: add MEDIA_BUS_FMT_BGR666_1X18

2022-12-01T10:13:56+00:00

Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X18 supported by the RaspberryPi. Signed-off-by: Joerg Quinten Reviewed-by: Laurent Pinchart Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-2-eb76e26a772d@cerno.tech Signed-off-by: Maxime Ripard

media: uapi: add MEDIA_BUS_FMT_RGB565_1X24_CPADHI

2022-12-01T10:13:56+00:00

Add the MEDIA_BUS_FMT_RGB565_1X24_CPADHI format used by the Geekworm MZP280 panel for the Raspberry Pi. Signed-off-by: Chris Morgan Reviewed-by: Laurent Pinchart Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-1-eb76e26a772d@cerno.tech Signed-off-by: Maxime Ripard

media: v4l: Add 1X16 16-bit greyscale media bus code definition

2022-10-25T11:38:31+00:00

This extends the greyscale media bus family originally from MEDIA_BUS_FMT_Y8_1X8 up to MEDIA_BUS_FMT_Y14_1X14 by adding MEDIA_BUS_FMT_Y16_1X16, and behaves the same way with 16 bits. Add its documentation in subdev-formats.rst Signed-off-by: Benjamin Mugnier Reviewed-by: Laurent Pinchart Signed-off-by: Sakari Ailus

media: uapi: Add some RGB bus formats for i.MX8qm/qxp pixel combiner

2022-06-20T19:15:04+00:00

This patch adds RGB666_1X30_CPADLO, RGB888_1X30_CPADLO, RGB666_1X36_CPADLO and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp pixel combiner. The RGB pixels with padding low per component are transmitted on a 30-bit input bus(10-bit per component) from a display controller or a 36-bit output bus(12-bit per component) to a pixel link. Reviewed-by: Robert Foss Reviewed-by: Laurent Pinchart Signed-off-by: Liu Ying Acked-by: Sakari Ailus Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-2-victor.liu@nxp.com

Merge tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2020-12-14T19:47:37+00:00

Pull media updates from Mauro Carvalho Chehab: - some rework at the uAPI pixel format docs - the smiapp driver has started to gain support for MIPI CSS camera sensors and was renamed - two new sensor drivers: ov02a10 and ov9734 - Meson gained a driver for the 2D acceleration unit - Rockchip rkisp1 driver was promoted from staging - Cedrus driver gained support for VP8 - two new remote controller keymaps were added - the usual set of fixes cleanups and driver improvements * tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (447 commits) media: ccs: Add support for obtaining C-PHY configuration from firmware media: ccs-pll: Print pixel rates media: ccs: Print written register values media: ccs: Add support for DDR OP SYS and OP PIX clocks media: ccs-pll: Add support for DDR OP system and pixel clocks media: ccs: Dual PLL support media: ccs-pll: Add trivial dual PLL support media: ccs-pll: Separate VT divisor limit calculation from the rest media: ccs-pll: Fix VT post-PLL divisor calculation media: ccs-pll: Make VT divisors 16-bit media: ccs-pll: Rework bounds checks media: ccs-pll: Print relevant information on PLL tree media: ccs-pll: Better separate OP and VT sub-tree calculation media: ccs-pll: Check for derating and overrating, support non-derating sensors media: ccs-pll: Split off VT subtree calculation media: ccs-pll: Add C-PHY support media: ccs-pll: Add sanity checks media: ccs-pll: Add support flexible OP PLL pixel clock divider media: ccs-pll: Support two cycles per pixel on OP domain media: ccs-pll: Add support for extended input PLL clock divider ...

media: uapi: Add MEDIA_BUS_FMT_RGB888_3X8_DELTA media bus format

2020-11-17T13:59:55+00:00

Add media bus format for 24-bit panels that expect their pixel data to be sent serially on a 8-bit bus, in RGB ordering on odd lines, and in GBR ordering on even lines (aka delta-RGB). Signed-off-by: Paul Cercueil Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20201101093150.8071-4-paul@crapouillou.net

media: uapi: add MEDIA_BUS_FMT_METADATA_FIXED media bus format.

2020-11-16T09:31:16+00:00

MEDIA_BUS_FMT_METADATA_FIXED should be used when the same driver handles both sides of the link and the bus format is a fixed metadata format that is not configurable from userspace. The width and height will be set to 0 for this format. Signed-off-by: Dafna Hirschfeld Acked-by: Helen Koike Acked-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: v4l: Add 1X14 14-bit greyscale media bus code definition

2020-03-20T08:01:16+00:00

The code is called MEDIA_BUS_FMT_Y14_1X14 and behaves just like MEDIA_BUS_FMT_Y12_1X12 with two more bits. Signed-off-by: Daniel Glöckner Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab