kernel/linux.git/include/uapi/linux/ipv6.h, branch v5.15.112

uapi: add missing ip/ipv6 header dependencies for linux/stddef.h

2023-02-14T18:17:59+00:00

[ Upstream commit 03702d4d29be4e2510ec80b248dbbde4e57030d9 ] Since commit 58e0be1ef6118 ("net: use struct_group to copy ip/ipv6 header addresses"), ip and ipv6 headers started to use the __struct_group definition, which is defined at include/uapi/linux/stddef.h. However, linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h, which breaks build of xskxceiver bpf selftest if you install the uapi headers in the system: $ make V=1 xskxceiver -C tools/testing/selftests/bpf ... make: Entering directory '(...)/tools/testing/selftests/bpf' gcc -g -O0 -rdynamic -Wall -Werror (...) In file included from xskxceiver.c:79: /usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’ 103 | __struct_group(/* no tag */, addrs, /* no attrs */, | ^~~~~~~~~~~~~~ ... Include the missing dependency in ip.h and do the same for the ipv6.h header. Fixes: 58e0be1ef611 ("net: use struct_group to copy ip/ipv6 header addresses") Signed-off-by: Herton R. Krzesinski Reviewed-by: Carlos O'Donell Tested-by: Carlos O'Donell Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: use struct_group to copy ip/ipv6 header addresses

2022-11-26T08:24:49+00:00

[ Upstream commit 58e0be1ef6118c5352b56a4d06e974c5599993a5 ] kernel test robot reported warnings when build bonding module with make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/bonding/: from ../drivers/net/bonding/bond_main.c:35: In function ‘fortify_memcpy_chk’, inlined from ‘iph_to_flow_copy_v4addrs’ at ../include/net/ip.h:566:2, inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3984:3: ../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 413 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘fortify_memcpy_chk’, inlined from ‘iph_to_flow_copy_v6addrs’ at ../include/net/ipv6.h:900:2, inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3994:3: ../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 413 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This is because we try to copy the whole ip/ip6 address to the flow_key, while we only point the to ip/ip6 saddr. Note that since these are UAPI headers, __struct_group() is used to avoid the compiler warnings. Reported-by: kernel test robot Fixes: c3f8324188fa ("net: Add full IPv6 addresses to flow_keys") Signed-off-by: Hangbin Liu Link: https://lore.kernel.org/r/20221115142400.1204786-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

ipv6: ioam: Data plane support for Pre-allocated Trace

2021-07-21T15:14:33+00:00

Implement support for processing the IOAM Pre-allocated Trace with IPv6, see [1] and [2]. Introduce a new IPv6 Hop-by-Hop TLV option, see IANA [3]. A new per-interface sysctl is introduced. The value is a boolean to accept (=1) or ignore (=0, by default) IPv6 IOAM options on ingress for an interface: - net.ipv6.conf.XXX.ioam6_enabled Two other sysctls are introduced to define IOAM IDs, represented by an integer. They are respectively per-namespace and per-interface: - net.ipv6.ioam6_id - net.ipv6.conf.XXX.ioam6_id The value of the first one represents the IOAM ID of the node itself (u32; max and default value = U32_MAX>>8, due to hop limit concatenation) while the other represents the IOAM ID of an interface (u16; max and default value = U16_MAX). Each "ioam6_id" sysctl has a "_wide" equivalent: - net.ipv6.ioam6_id_wide - net.ipv6.conf.XXX.ioam6_id_wide The value of the first one represents the wide IOAM ID of the node itself (u64; max and default value = U64_MAX>>8, due to hop limit concatenation) while the other represents the wide IOAM ID of an interface (u32; max and default value = U32_MAX). The use of short and wide equivalents is not exclusive, a deployment could choose to leverage both. For example, net.ipv6.conf.XXX.ioam6_id (short format) could be an identifier for a physical interface, whereas net.ipv6.conf.XXX.ioam6_id_wide (wide format) could be an identifier for a logical sub-interface. Documentation about new sysctls is provided at the end of this patchset. Two relativistic hash tables are used: one for IOAM namespaces, the other for IOAM schemas. A namespace can only have a single active schema and a schema can only be attached to a single namespace (1:1 relationship). [1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options [2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data [3] https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml#ipv6-parameters-2 Signed-off-by: Justin Iurman Signed-off-by: David S. Miller

net: allow user to set metric on default route learned via Router Advertisement

2021-01-27T02:39:45+00:00

For IPv4, default route is learned via DHCPv4 and user is allowed to change metric using config etc/network/interfaces. But for IPv6, default route can be learned via RA, for which, currently a fixed metric value 1024 is used. Ideally, user should be able to configure metric on default route for IPv6 similar to IPv4. This patch adds sysctl for the same. Logs: For IPv4: Config in etc/network/interfaces: auto eth0 iface eth0 inet dhcp metric 4261413864 IPv4 Kernel Route Table: $ ip route list default via 172.21.47.1 dev eth0 metric 4261413864 FRR Table, if a static route is configured: [In real scenario, it is useful to prefer BGP learned default route over DHCPv4 default route.] Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP, T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, > - selected route, * - FIB route S>* 0.0.0.0/0 [20/0] is directly connected, eth0, 00:00:03 K 0.0.0.0/0 [254/1000] via 172.21.47.1, eth0, 6d08h51m i.e. User can prefer Default Router learned via Routing Protocol in IPv4. Similar behavior is not possible for IPv6, without this fix. After fix [for IPv6]: sudo sysctl -w net.ipv6.conf.eth0.net.ipv6.conf.eth0.ra_defrtr_metric=1996489705 IP monitor: [When IPv6 RA is received] default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 pref high Kernel IPv6 routing table $ ip -6 route list default via fe80::be16:65ff:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 21sec hoplimit 64 pref high FRR Table, if a static route is configured: [In real scenario, it is useful to prefer BGP learned default route over IPv6 RA default route.] Codes: K - kernel route, C - connected, S - static, R - RIPng, O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, > - selected route, * - FIB route S>* ::/0 [20/0] is directly connected, eth0, 00:00:06 K ::/0 [119/1001] via fe80::xx16:xxxx:feb3:ce8e, eth0, 6d07h43m If the metric is changed later, the effect will be seen only when next IPv6 RA is received, because the default route must be fully controlled by RA msg. Below metric is changed from 1996489705 to 1996489704. $ sudo sysctl -w net.ipv6.conf.eth0.ra_defrtr_metric=1996489704 net.ipv6.conf.eth0.ra_defrtr_metric = 1996489704 IP monitor: [On next IPv6 RA msg, Kernel deletes prev route and installs new route with updated metric] Deleted default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 3sec hoplimit 64 pref high default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489704 pref high Signed-off-by: Praveen Chaudhary Signed-off-by: Zhenggen Xu Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20210125214430.24079-1-pchaudhary@linkedin.com Signed-off-by: Jakub Kicinski

net: ipv6: add support for rpl sr exthdr

2020-03-30T05:30:57+00:00

This patch adds rpl source routing receive handling. Everything works only if sysconf "rpl_seg_enabled" and source routing is enabled. Mostly the same behaviour as IPv6 segmentation routing. To handle compression and uncompression a rpl.c file is created which contains the necessary functionality. The receive handling will also care about IPv6 encapsulated so far it's specified as possible nexthdr in RFC 6554. Signed-off-by: Alexander Aring Signed-off-by: David S. Miller

net: ipv6: sysctl to specify IPv6 ND traffic class

2017-11-11T06:13:02+00:00

Add a per-device sysctl to specify the default traffic class to use for kernel originated IPv6 Neighbour Discovery packets. Currently this includes: - Router Solicitation (ICMPv6 type 133) ndisc_send_rs() -> ndisc_send_skb() -> ip6_nd_hdr() - Neighbour Solicitation (ICMPv6 type 135) ndisc_send_ns() -> ndisc_send_skb() -> ip6_nd_hdr() - Neighbour Advertisement (ICMPv6 type 136) ndisc_send_na() -> ndisc_send_skb() -> ip6_nd_hdr() - Redirect (ICMPv6 type 137) ndisc_send_redirect() -> ndisc_send_skb() -> ip6_nd_hdr() and if the kernel ever gets around to generating RA's, it would presumably also include: - Router Advertisement (ICMPv6 type 134) (radvd daemon could pick up on the kernel setting and use it) Interface drivers may examine the Traffic Class value and translate the DiffServ Code Point into a link-layer appropriate traffic prioritization scheme. An example of mapping IETF DSCP values to IEEE 802.11 User Priority values can be found here: https://tools.ietf.org/html/draft-ietf-tsvwg-ieee-802-11 The expected primary use case is to properly prioritize ND over wifi. Testing: jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 0 jzem22:~# echo -1 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass -bash: echo: write error: Invalid argument jzem22:~# echo 256 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass -bash: echo: write error: Invalid argument jzem22:~# echo 0 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# echo 255 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 255 jzem22:~# echo 34 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 34 jzem22:~# echo $[0xDC] > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# tcpdump -v -i eth0 icmp6 and src host jzem22.pgc and dst host fe80::1 tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes IP6 (class 0xdc, hlim 255, next-header ICMPv6 (58) payload length: 24) jzem22.pgc > fe80::1: [icmp6 sum ok] ICMP6, neighbor advertisement, length 24, tgt is jzem22.pgc, Flags [solicited] (based on original change written by Erik Kline, with minor changes) v2: fix 'suspicious rcu_dereference_check() usage' by explicitly grabbing the rcu_read_lock. Cc: Lorenzo Colitti Signed-off-by: Erik Kline Signed-off-by: Maciej Żenczykowski Signed-off-by: David S. Miller

License cleanup: add SPDX license identifier to uapi header files with no license

2017-11-02T10:19:54+00:00

Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: ipv6: Add sysctl for minimum prefix len acceptable in RIOs.

2017-03-22T21:20:54+00:00

This commit adds a new sysctl accept_ra_rt_info_min_plen that defines the minimum acceptable prefix length of Route Information Options. The new sysctl is intended to be used together with accept_ra_rt_info_max_plen to configure a range of acceptable prefix lengths. It is useful to prevent misconfigurations from unintentionally blackholing too much of the IPv6 address space (e.g., home routers announcing RIOs for fc00::/7, which is incorrect). Signed-off-by: Joel Scherpelz Acked-by: Lorenzo Colitti Signed-off-by: David S. Miller

ipv6: Provide ipv6 version of "disable_policy" sysctl

2017-03-07T01:10:20+00:00

This provides equivalent functionality to the existing ipv4 "disable_policy" systcl. ie. Allows IPsec processing to be skipped on terminating packets on a per-interface basis. Signed-off-by: David Forster Signed-off-by: David S. Miller

net/ipv6: allow sysctl to change link-local address generation mode

2017-01-27T15:25:34+00:00

The address generation mode for IPv6 link-local can only be configured by netlink messages. This patch adds the ability to change the address generation mode via sysctl. v1 -> v2 Removed the rtnl lock and switch to use RCU lock to iterate through the netdev list. v2 -> v3 Removed the addrgenmode variable from the idev structure and use the systcl storage for the flag. Simplifed the logic for sysctl handling by removing the supported for all operation. Added support for more types of tunnel interfaces for link-local address generation. Based the patches from net-next. v3 -> v4 Removed unnecessary whitespace changes. Signed-off-by: Felix Jia Signed-off-by: David S. Miller