kernel/linux.git/include/uapi/linux/if_bridge.h, branch v6.6.131

bridge: vlan: Allow setting VLAN neighbor suppression state

2023-04-21T07:25:50+00:00

Add a new VLAN attribute that allows user space to set the neighbor suppression state of the port VLAN. Example: # bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]' false # bridge vlan set vid 10 dev swp1 neigh_suppress on # bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]' true # bridge vlan set vid 10 dev swp1 neigh_suppress off # bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]' false # bridge vlan set vid 10 dev br0 neigh_suppress on Error: bridge: Can't set neigh_suppress for non-port vlans. Signed-off-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

vxlan: mdb: Add MDB control path support

2023-03-17T08:05:49+00:00

Implement MDB control path support, enabling the creation, deletion, replacement and dumping of MDB entries in a similar fashion to the bridge driver. Unlike the bridge driver, each entry stores a list of remote VTEPs to which matched packets need to be replicated to and not a list of bridge ports. The motivating use case is the installation of MDB entries by a user space control plane in response to received EVPN routes. As such, only allow permanent MDB entries to be installed and do not implement snooping functionality, avoiding a lot of unnecessary complexity. Since entries can only be modified by user space under RTNL, use RTNL as the write lock. Use RCU to ensure that MDB entries and remotes are not freed while being accessed from the data path during transmission. In terms of uAPI, reuse the existing MDB netlink interface, but add a few new attributes to request and response messages: * IP address of the destination VXLAN tunnel endpoint where the multicast receivers reside. * UDP destination port number to use to connect to the remote VXLAN tunnel endpoint. * VXLAN VNI Network Identifier to use to connect to the remote VXLAN tunnel endpoint. Required when Ingress Replication (IR) is used and the remote VTEP is not a member of originating broadcast domain (VLAN/VNI) [1]. * Source VNI Network Identifier the MDB entry belongs to. Used only when the VXLAN device is in external mode. * Interface index of the outgoing interface to reach the remote VXLAN tunnel endpoint. This is required when the underlay destination IP is multicast (P2MP), as the multicast routing tables are not consulted. All the new attributes are added under the 'MDBA_SET_ENTRY_ATTRS' nest which is strictly validated by the bridge driver, thereby automatically rejecting the new attributes. [1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-3.2.2 Signed-off-by: Ido Schimmel Reviewed-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

net: bridge: Add netlink knobs for number / maximum MDB entries

2023-02-06T08:48:26+00:00

The previous patch added accounting for number of MDB entries per port and per port-VLAN, and the logic to verify that these values stay within configured bounds. However it didn't provide means to actually configure those bounds or read the occupancy. This patch does that. Two new netlink attributes are added for the MDB occupancy: IFLA_BRPORT_MCAST_N_GROUPS for the per-port occupancy and BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS for the per-port-VLAN occupancy. And another two for the maximum number of MDB entries: IFLA_BRPORT_MCAST_MAX_GROUPS for the per-port maximum, and BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS for the per-port-VLAN one. Note that the two new IFLA_BRPORT_ attributes prompt bumping of RTNL_SLAVE_MAX_TYPE to size the slave attribute tables large enough. The new attributes are used like this: # ip link add name br up type bridge vlan_filtering 1 mcast_snooping 1 \ mcast_vlan_snooping 1 mcast_querier 1 # ip link set dev v1 master br # bridge vlan add dev v1 vid 2 # bridge vlan set dev v1 vid 1 mcast_max_groups 1 # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 1 # bridge mdb add dev br port v1 grp 230.1.2.4 temp vid 1 Error: bridge: Port-VLAN is already in 1 groups, and mcast_max_groups=1. # bridge link set dev v1 mcast_max_groups 1 # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 2 Error: bridge: Port is already in 1 groups, and mcast_max_groups=1. # bridge -d link show 5: v1@v2: mtu 1500 master br [...] [...] mcast_n_groups 1 mcast_max_groups 1 # bridge -d vlan show port vlan-id br 1 PVID Egress Untagged state forwarding mcast_router 1 v1 1 PVID Egress Untagged [...] mcast_n_groups 1 mcast_max_groups 1 2 [...] mcast_n_groups 0 mcast_max_groups 0 Signed-off-by: Petr Machata Acked-by: Nikolay Aleksandrov Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller

bridge: mcast: Allow user space to specify MDB entry routing protocol

2022-12-12T23:33:37+00:00

Add the 'MDBE_ATTR_RTPORT' attribute to allow user space to specify the routing protocol of the MDB port group entry. Enforce a minimum value of 'RTPROT_STATIC' to prevent user space from using protocol values that should only be set by the kernel (e.g., 'RTPROT_KERNEL'). Maintain backward compatibility by defaulting to 'RTPROT_STATIC'. The protocol is already visible to user space in RTM_NEWMDB responses and notifications via the 'MDBA_MDB_EATTR_RTPROT' attribute. The routing protocol allows a routing daemon to distinguish between entries configured by it and those configured by the administrator. Once MDB flush is supported, the protocol can be used as a criterion according to which the flush is performed. Examples: # bridge mdb add dev br0 port dummy10 grp 239.1.1.1 permanent proto kernel Error: integer out of range. # bridge mdb add dev br0 port dummy10 grp 239.1.1.1 permanent proto static # bridge mdb add dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent proto zebra # bridge mdb add dev br0 port dummy10 grp 239.1.1.2 permanent source_list 198.51.100.1,198.51.100.2 filter_mode include proto 250 # bridge -d mdb show dev br0 port dummy10 grp 239.1.1.2 src 198.51.100.2 permanent filter_mode include proto 250 dev br0 port dummy10 grp 239.1.1.2 src 198.51.100.1 permanent filter_mode include proto 250 dev br0 port dummy10 grp 239.1.1.2 permanent filter_mode include source_list 198.51.100.2/0.00,198.51.100.1/0.00 proto 250 dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto zebra dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode exclude proto static Signed-off-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Signed-off-by: Jakub Kicinski

bridge: mcast: Allow user space to add (*, G) with a source list and filter mode

2022-12-12T23:33:37+00:00

Add new netlink attributes to the RTM_NEWMDB request that allow user space to add (*, G) with a source list and filter mode. The RTM_NEWMDB message can already dump such entries (created by the kernel) so there is no need to add dump support. However, the message contains a different set of attributes depending if it is a request or a response. The naming and structure of the new attributes try to follow the existing ones used in the response. Request: [ struct nlmsghdr ] [ struct br_port_msg ] [ MDBA_SET_ENTRY ] struct br_mdb_entry [ MDBA_SET_ENTRY_ATTRS ] [ MDBE_ATTR_SOURCE ] struct in_addr / struct in6_addr [ MDBE_ATTR_SRC_LIST ] // new [ MDBE_SRC_LIST_ENTRY ] [ MDBE_SRCATTR_ADDRESS ] struct in_addr / struct in6_addr [ ...] [ MDBE_ATTR_GROUP_MODE ] // new u8 Response: [ struct nlmsghdr ] [ struct br_port_msg ] [ MDBA_MDB ] [ MDBA_MDB_ENTRY ] [ MDBA_MDB_ENTRY_INFO ] struct br_mdb_entry [ MDBA_MDB_EATTR_TIMER ] u32 [ MDBA_MDB_EATTR_SOURCE ] struct in_addr / struct in6_addr [ MDBA_MDB_EATTR_RTPROT ] u8 [ MDBA_MDB_EATTR_SRC_LIST ] [ MDBA_MDB_SRCLIST_ENTRY ] [ MDBA_MDB_SRCATTR_ADDRESS ] struct in_addr / struct in6_addr [ MDBA_MDB_SRCATTR_TIMER ] u8 [...] [ MDBA_MDB_EATTR_GROUP_MODE ] u8 Signed-off-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Signed-off-by: Jakub Kicinski

net: bridge: mst: Support setting and reporting MST port states

2022-03-17T23:49:57+00:00

Make it possible to change the port state in a given MSTI by extending the bridge port netlink interface (RTM_SETLINK on PF_BRIDGE).The proposed iproute2 interface would be: bridge mst set dev msti state Current states in all applicable MSTIs can also be dumped via a corresponding RTM_GETLINK. The proposed iproute interface looks like this: $ bridge mst port msti vb1 0 state forwarding 100 state disabled vb2 0 state forwarding 100 state forwarding The preexisting per-VLAN states are still valid in the MST mode (although they are read-only), and can be queried as usual if one is interested in knowing a particular VLAN's state without having to care about the VID to MSTI mapping (in this example VLAN 20 and 30 are bound to MSTI 100): $ bridge -d vlan port vlan-id vb1 10 state forwarding mcast_router 1 20 state disabled mcast_router 1 30 state disabled mcast_router 1 40 state forwarding mcast_router 1 vb2 10 state forwarding mcast_router 1 20 state forwarding mcast_router 1 30 state forwarding mcast_router 1 40 state forwarding mcast_router 1 Signed-off-by: Tobias Waldekranz Acked-by: Nikolay Aleksandrov Signed-off-by: Jakub Kicinski

net: bridge: mst: Allow changing a VLAN's MSTI

2022-03-17T23:49:57+00:00

Allow a VLAN to move out of the CST (MSTI 0), to an independent tree. The user manages the VID to MSTI mappings via a global VLAN setting. The proposed iproute2 interface would be: bridge vlan global set dev br0 vid msti Changing the state in non-zero MSTIs is still not supported, but will be addressed in upcoming changes. Signed-off-by: Tobias Waldekranz Acked-by: Nikolay Aleksandrov Signed-off-by: Jakub Kicinski

net: bridge: mst: Multiple Spanning Tree (MST) mode

2022-03-17T23:49:57+00:00

Allow the user to switch from the current per-VLAN STP mode to an MST mode. Up to this point, per-VLAN STP states where always isolated from each other. This is in contrast to the MSTP standard (802.1Q-2018, Clause 13.5), where VLANs are grouped into MST instances (MSTIs), and the state is managed on a per-MSTI level, rather that at the per-VLAN level. Perhaps due to the prevalence of the standard, many switching ASICs are built after the same model. Therefore, add a corresponding MST mode to the bridge, which we can later add offloading support for in a straight-forward way. For now, all VLANs are fixed to MSTI 0, also called the Common Spanning Tree (CST). That is, all VLANs will follow the port-global state. Upcoming changes will make this actually useful by allowing VLANs to be mapped to arbitrary MSTIs and allow individual MSTI states to be changed. Signed-off-by: Tobias Waldekranz Acked-by: Nikolay Aleksandrov Signed-off-by: Jakub Kicinski

net: bridge: vlan: convert mcast router global option to per-vlan entry

2021-08-20T14:00:35+00:00

The per-vlan router option controls the port/vlan and host vlan entries' mcast router config. The global option controlled only the host vlan config, but that is unnecessary and incosistent as it's not really a global vlan option, but rather bridge option to control host router config, so convert BRIDGE_VLANDB_GOPTS_MCAST_ROUTER to BRIDGE_VLANDB_ENTRY_MCAST_ROUTER which can be used to control both host vlan and port vlan mcast router config. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

net: bridge: vlan: dump mcast ctx querier state

2021-08-14T13:02:43+00:00

Use the new mcast querier state dump infrastructure and export vlans' mcast context querier state embedded in attribute BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller