kernel/linux.git/include/trace/events/power.h, branch v6.6.134

cpuidle: Add cpu_idle_miss trace event

2022-08-03T15:50:58+00:00

Add a trace event for cpuidle to track missed (too deep or too shallow) wakeups. After each wakeup, CPUIdle already computes whether the entered state was optimal, above or below the desired one and updates the relevant counters. This patch makes it possible to trace those events in addition to just reading the counters. The patterns of types and percentages of misses across different workloads appear to be very consistent. This makes the trace event very useful for comparing the relative correctness of different CPUIdle governors for different types of workloads, or for finding the optimal governor for a given device. Signed-off-by: Kajetan Puchalski Reviewed-by: Steven Rostedt (Google) Signed-off-by: Rafael J. Wysocki

cpuidle: haltpoll: Add trace points for guest_halt_poll_ns grow/shrink

2022-06-14T14:01:35+00:00

Add trace points as are implemented in KVM host halt polling. This helps tune guest halt polling params. Signed-off-by: Eiichi Tsukata Acked-by: Marcelo Tosatti Signed-off-by: Rafael J. Wysocki

PM: QoS: Simplify definitions of CPU latency QoS trace events

2020-02-13T10:26:39+00:00

Modify the definitions of the CPU latency QoS trace events to take one argument (since PM_QOS_CPU_DMA_LATENCY is always passed as the pm_qos_class argument to them) and update the documentation of them accordingly (while at it, make it explicitly mention CPU latency QoS and relocate it after the device PM QoS trace events documentation). The names and output format of the trace events do not change to preserve user space compatibility. No intentional functional impact. Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Reviewed-by: Amit Kucheria Tested-by: Amit Kucheria

PM: QoS: Drop pm_qos_update_request_timeout()

2020-02-13T10:25:40+00:00

The pm_qos_update_request_timeout() function is not called from anywhere, so drop it along with the work member in struct pm_qos_request needed by it. Also drop the useless pm_qos_update_request_timeout trace event that is only triggered by that function (so it never triggers at all) and update the trace events documentation accordingly. Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Reviewed-by: Amit Kucheria Tested-by: Amit Kucheria

PM: QoS: Get rid of unused flags

2019-08-20T22:38:54+00:00

The network_latency and network_throughput flags for PM-QoS have not found much use in drivers or in userspace since they were introduced. Commit 4a733ef1bea7 ("mac80211: remove PM-QoS listener") removed the only user PM_QOS_NETWORK_LATENCY in the kernel a while ago and there don't seem to be any userspace tools using the character device files either. PM_QOS_MEMORY_BANDWIDTH was never even added to the trace events. Remove all the flags except cpu_dma_latency. Signed-off-by: Amit Kucheria Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

cpufreq: trace frequency limits change

2018-07-26T08:17:47+00:00

systrace used for tracing for Android systems has carried a patch for many years in the Android tree that traces when the cpufreq limits change. With the help of this information, systrace can know when the policy limits change and can visually display the data. Lets add upstream support for the same. Signed-off-by: Ruchi Kandoi Signed-off-by: Joel Fernandes (Google) Acked-by: Viresh Kumar Acked-by: Steven Rostedt (VMware) Signed-off-by: Rafael J. Wysocki

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

cpufreq: intel_pstate: Add io_boost trace

2016-09-16T21:55:30+00:00

Add io_boost percent to current pstate_sample tracepoint. Signed-off-by: Srinivas Pandruvada Signed-off-by: Rafael J. Wysocki

cpufreq: powernv/tracing: Add powernv_throttle tracepoint

2016-02-05T01:38:02+00:00

This patch adds the powernv_throttle tracepoint to trace the CPU frequency throttling event, which is used by the powernv-cpufreq driver in POWER8. Signed-off-by: Shilpasri G Bhat Reviewed-by: Gautham R. Shenoy Signed-off-by: Rafael J. Wysocki

Merge tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2015-06-26T21:02:43+00:00

Pull tracing updates from Steven Rostedt: "This patch series contains several clean ups and even a new trace clock "monitonic raw". Also some enhancements to make the ring buffer even faster. But the biggest and most noticeable change is the renaming of the ftrace* files, structures and variables that have to deal with trace events. Over the years I've had several developers tell me about their confusion with what ftrace is compared to events. Technically, "ftrace" is the infrastructure to do the function hooks, which include tracing and also helps with live kernel patching. But the trace events are a separate entity altogether, and the files that affect the trace events should not be named "ftrace". These include: include/trace/ftrace.h -> include/trace/trace_events.h include/linux/ftrace_event.h -> include/linux/trace_events.h Also, functions that are specific for trace events have also been renamed: ftrace_print_*() -> trace_print_*() (un)register_ftrace_event() -> (un)register_trace_event() ftrace_event_name() -> trace_event_name() ftrace_trigger_soft_disabled() -> trace_trigger_soft_disabled() ftrace_define_fields_##call() -> trace_define_fields_##call() ftrace_get_offsets_##call() -> trace_get_offsets_##call() Structures have been renamed: ftrace_event_file -> trace_event_file ftrace_event_{call,class} -> trace_event_{call,class} ftrace_event_buffer -> trace_event_buffer ftrace_subsystem_dir -> trace_subsystem_dir ftrace_event_raw_##call -> trace_event_raw_##call ftrace_event_data_offset_##call-> trace_event_data_offset_##call ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call And a few various variables and flags have also been updated. This has been sitting in linux-next for some time, and I have not heard a single complaint about this rename breaking anything. Mostly because these functions, variables and structures are mostly internal to the tracing system and are seldom (if ever) used by anything external to that" * tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) ring_buffer: Allow to exit the ring buffer benchmark immediately ring-buffer-benchmark: Fix the wrong type ring-buffer-benchmark: Fix the wrong param in module_param ring-buffer: Add enum names for the context levels ring-buffer: Remove useless unused tracing_off_permanent() ring-buffer: Give NMIs a chance to lock the reader_lock ring-buffer: Add trace_recursive checks to ring_buffer_write() ring-buffer: Allways do the trace_recursive checks ring-buffer: Move recursive check to per_cpu descriptor ring-buffer: Add unlikelys to make fast path the default tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call() tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call() tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled() tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_* tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir tracing: Rename ftrace_event_name() to trace_event_name() tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX ...