kernel/linux.git/include/target/target_core_base.h, branch v3.15.2

target: Pass in transport supported PI at session initialization

2014-04-07T08:48:54+00:00

In order to support local WRITE_INSERT + READ_STRIP operations for non PI enabled fabrics, the fabric driver needs to be able signal what protection offload operations are supported. This is done at session initialization time so the modes can be signaled by individual se_wwn + se_portal_group endpoints, as well as optionally across different transports on the same endpoint. For iser-target, set TARGET_PROT_ALL if the underlying ib_device has already signaled PI offload support, and allow this to be exposed via a new iscsit_transport->iscsit_get_sup_prot_ops() callback. For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode operation. For all other drivers, set TARGET_PROT_NORMAL to disable fabric level PI. Cc: Martin K. Petersen Cc: Sagi Grimberg Cc: Or Gerlitz Cc: Quinn Tran Cc: Giridhar Malavali Signed-off-by: Nicholas Bellinger

target: Fix Task Aborted Status (TAS) handling

2014-04-07T08:48:50+00:00

This patch addresses three of long standing issues wrt to Task Aborted Status (TAS) handling. The first is the incorrect assumption in core_tmr_handle_tas_abort() that TASK_ABORTED status is sent for the task referenced by TMR ABORT_TASK, and sending TASK_ABORTED status for TMR LUN_RESET on the same nexus the LUN_RESET was received. The second is to ensure the lun reference count is dropped within transport_cmd_finish_abort() by calling transport_lun_remove_cmd() before invoking transport_cmd_check_stop_to_fabric(). The last is to fix the delayed TAS handling to allow outstanding WRITEs to complete before sending the TASK_ABORTED status. This includes changing transport_check_aborted_status() to avoid processing when SCF_SEND_DELAYED_TAS has not be set, and updating transport_send_task_abort() to drop the SCF_SENT_DELAYED_TAS check. Signed-off-by: Alex Leung Cc: Alex Leung Signed-off-by: Nicholas Bellinger

Target/core: Remove prot_handover use for now

2014-04-07T08:48:43+00:00

This is not going to be supported soon - so drop it. Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger

Target/dif: Introduce protection-passthough-only mode

2014-04-07T08:48:42+00:00

Some transports (iSCSI/iSER/SRP/FC) support hardware INSERT/STRIP capabilities while other transports like loopback/vhost-scsi need perform this is software. This patch allows fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC to signal the early LUN scan handling case where PROTECT CDB bits are set, but no fabric buffer has been provided. For transports which use generic new command these buffers have yet to be allocated. Also this way, target may support protection information against legacy initiators (writes are inserted and reads are stripped). (Only set prot_pto for loopback during early special case - nab) Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger

Target/sbc: Set protection operation and relevant checks

2014-03-13T19:03:02+00:00

SBC-3 mandates the protection checks that must be performed in the rdprotect/wrprotect field. Use them. According to backstore device pi_attributes and cdb rdprotect/wrprotect field. (Fix incorrect se_cmd->prot_type -> TARGET_PROT_NORMAL comparision in transport_generic_new_cmd - nab) (Fix missing break in sbc_set_prot_op_checks - DanC + Sagi) Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger

target: Simplify command completion by removing CMD_T_FAILED flag

2014-02-12T23:14:30+00:00

The CMD_T_FAILED flag is set used in one place to record the result of a trivial test, and it is only tested once, few lines later. We might as well make the code simpler and easier to read by directly doing the test of "success" where we want to use it. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2014-01-31T23:31:23+00:00

Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ...

target: Fix percpu_ref_put race in transport_lun_remove_cmd

2014-01-30T11:58:34+00:00

This patch fixes a percpu_ref_put race for se_lun->lun_ref in transport_lun_remove_cmd() where ->lun_ref could end up being put more than once per command via different target completion and fabric release contexts. It adds a cmpxchg() for se_cmd->lun_ref_active to ensure that percpu_ref_put() is only ever called once per se_cmd. This bug was manifesting itself as a LUN shutdown regression bug in >= v3.13 code, where percpu_ref_kill() would end up hanging indefinately due to the incorrect percpu_ref count. (Change se_cmd->lun_ref_active from bool -> int to force at least a 4-byte cmpxchg with MIPS ll/sc ins. - Fengguang) Reported-by: Tommy Apel Cc: Tommy Apel Cc: #3.13+ Signed-off-by: Nicholas Bellinger

target: Report bad sector in sense data for DIF errors

2014-01-25T06:58:53+00:00

SPC-4 states that data-integrity errors shall also report the failed sector in CHECK_CONDITION response sense data information field. Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger

target: Add DIF CHECK_CONDITION ASC/ASCQ exception cases

2014-01-18T09:53:11+00:00

This patch adds support for DIF related CHECK_CONDITION ASC/ASCQ exception cases into transport_send_check_condition_and_sense(). This includes: LOGICAL BLOCK GUARD CHECK FAILED LOGICAL BLOCK APPLICATION TAG CHECK FAILED LOGICAL BLOCK REFERENCE TAG CHECK FAILED that used by DIF TYPE1 and TYPE3 failure cases. Cc: Martin K. Petersen Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Sagi Grimberg Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger