kernel/linux.git/include/target/iscsi, branch v3.18.136

iscsi-target: Fix iscsi_np reset hung task during parallel delete

2017-11-21T08:01:04+00:00

commit 978d13d60c34818a41fc35962602bdfa5c03f214 upstream. This patch fixes a bug associated with iscsit_reset_np_thread() that can occur during parallel configfs rmdir of a single iscsi_np used across multiple iscsi-target instances, that would result in hung task(s) similar to below where configfs rmdir process context was blocked indefinately waiting for iscsi_np->np_restart_comp to finish: [ 6726.112076] INFO: task dcp_proxy_node_:15550 blocked for more than 120 seconds. [ 6726.119440] Tainted: G W O 4.1.26-3321 #2 [ 6726.125045] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 6726.132927] dcp_proxy_node_ D ffff8803f202bc88 0 15550 1 0x00000000 [ 6726.140058] ffff8803f202bc88 ffff88085c64d960 ffff88083b3b1ad0 ffff88087fffeb08 [ 6726.147593] ffff8803f202c000 7fffffffffffffff ffff88083f459c28 ffff88083b3b1ad0 [ 6726.155132] ffff88035373c100 ffff8803f202bca8 ffffffff8168ced2 ffff8803f202bcb8 [ 6726.162667] Call Trace: [ 6726.165150] [] schedule+0x32/0x80 [ 6726.170156] [] schedule_timeout+0x214/0x290 [ 6726.176030] [] ? __send_signal+0x52/0x4a0 [ 6726.181728] [] wait_for_completion+0x96/0x100 [ 6726.187774] [] ? wake_up_state+0x10/0x10 [ 6726.193395] [] iscsit_reset_np_thread+0x62/0xe0 [iscsi_target_mod] [ 6726.201278] [] iscsit_tpg_disable_portal_group+0x96/0x190 [iscsi_target_mod] [ 6726.210033] [] lio_target_tpg_store_enable+0x4f/0xc0 [iscsi_target_mod] [ 6726.218351] [] configfs_write_file+0xaa/0x110 [ 6726.224392] [] vfs_write+0xa4/0x1b0 [ 6726.229576] [] SyS_write+0x41/0xb0 [ 6726.234659] [] system_call_fastpath+0x12/0x71 It would happen because each iscsit_reset_np_thread() sets state to ISCSI_NP_THREAD_RESET, sends SIGINT, and then blocks waiting for completion on iscsi_np->np_restart_comp. However, if iscsi_np was active processing a login request and more than a single iscsit_reset_np_thread() caller to the same iscsi_np was blocked on iscsi_np->np_restart_comp, iscsi_np kthread process context in __iscsi_target_login_thread() would flush pending signals and only perform a single completion of np->np_restart_comp before going back to sleep within transport specific iscsit_transport->iscsi_accept_np code. To address this bug, add a iscsi_np->np_reset_count and update __iscsi_target_login_thread() to keep completing np->np_restart_comp until ->np_reset_count has reached zero. Reported-by: Gary Guo Tested-by: Gary Guo Cc: Mike Christie Cc: Hannes Reinecke Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target/iscsi: Fix np_ip bracket issue by removing np_ip

2015-10-28T02:12:52+00:00

[ Upstream commit 76c28f1fcfeb42b47f798fe498351ee1d60086ae ] Revert commit 1997e6259, which causes double brackets on ipv6 inaddr_any addresses. Since we have np_sockaddr, if we need a textual representation we can use "%pISc". Change iscsit_add_network_portal() and iscsit_add_np() signatures to remove *ip_str parameter. Fix and extend some comments earlier in the function. Tested to work for :: and ::1 via iscsiadm, previously :: failed, see https://bugzilla.redhat.com/show_bug.cgi?id=1249107 . CC: stable@vger.kernel.org Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger Signed-off-by: Sasha Levin

Target/iscsi: Fix sendtargets response pdu for iser transport

2014-06-11T18:52:39+00:00

In case the transport is iser we should not include the iscsi target info in the sendtargets text response pdu. This causes sendtargets response to include the target info twice. Modify iscsit_build_sendtargets_response to filter transport types that don't match. Signed-off-by: Sagi Grimberg Reported-by: Slava Shwartsman Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: Nicholas Bellinger

target: Pass in transport supported PI at session initialization

2014-04-07T08:48:54+00:00

In order to support local WRITE_INSERT + READ_STRIP operations for non PI enabled fabrics, the fabric driver needs to be able signal what protection offload operations are supported. This is done at session initialization time so the modes can be signaled by individual se_wwn + se_portal_group endpoints, as well as optionally across different transports on the same endpoint. For iser-target, set TARGET_PROT_ALL if the underlying ib_device has already signaled PI offload support, and allow this to be exposed via a new iscsit_transport->iscsit_get_sup_prot_ops() callback. For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode operation. For all other drivers, set TARGET_PROT_NORMAL to disable fabric level PI. Cc: Martin K. Petersen Cc: Sagi Grimberg Cc: Or Gerlitz Cc: Quinn Tran Cc: Giridhar Malavali Signed-off-by: Nicholas Bellinger

target: Add TFO->abort_task for aborted task resources release

2014-04-07T08:48:51+00:00

Now that TASK_ABORTED status is not generated for all cases by TMR ABORT_TASK + LUN_RESET, a new TFO->abort_task() caller is necessary in order to give fabric drivers a chance to unmap hardware / software resources before the se_cmd descriptor is released via the normal TFO->release_cmd() codepath. This patch adds TFO->aborted_task() in core_tmr_abort_task() in place of the original transport_send_task_abort(), and also updates all fabric drivers to implement this caller. The fabric drivers that include changes to perform cleanup via ->aborted_task() are: - iscsi-target - iser-target - srpt - tcm_qla2xxx The fabric drivers that currently set ->aborted_task() to NOPs are: - loopback - tcm_fc - usb-gadget - sbp-target - vhost-scsi For the latter five, there appears to be no additional cleanup required before invoking TFO->release_cmd() to release the se_cmd descriptor. v2 changes: - Move ->aborted_task() call into transport_cmd_finish_abort (Alex) Cc: Alex Leung Cc: Mark Rustad Cc: Roland Dreier Cc: Vu Pham Cc: Chris Boot Cc: Sebastian Andrzej Siewior Cc: Michael S. Tsirkin Cc: Giridhar Malavali Cc: Saurav Kashyap Cc: Quinn Tran Cc: Sagi Grimberg Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger

iscsi/iser-target: Fix isert_conn->state hung shutdown issues

2014-03-05T01:54:09+00:00

This patch addresses a couple of different hug shutdown issues related to wait_event() + isert_conn->state. First, it changes isert_conn->conn_wait + isert_conn->conn_wait_comp_err from waitqueues to completions, and sets ISER_CONN_TERMINATING from within isert_disconnect_work(). Second, it splits isert_free_conn() into isert_wait_conn() that is called earlier in iscsit_close_connection() to ensure that all outstanding commands have completed before continuing. Finally, it breaks isert_cq_comp_err() into seperate TX / RX related code, and adds logic in isert_cq_rx_comp_err() to wait for outstanding commands to complete before setting ISER_CONN_DOWN and calling complete(&isert_conn->conn_wait_comp_err). Acked-by: Sagi Grimberg Cc: Or Gerlitz Cc: #3.10+ Signed-off-by: Nicholas Bellinger

iscsi-target: Convert gfp_t parameter to task state bitmask

2014-01-25T06:58:52+00:00

This patch propigates the use of task state bitmask now used by percpu_ida_alloc() up the iscsi-target callchain, replacing the use of GFP_ATOMIC for TASK_RUNNING, and GFP_KERNEL for TASK_INTERRUPTIBLE. Also, drop the unnecessary gfp_t parameter to isert_allocate_cmd(), and just pass TASK_INTERRUPTIBLE into iscsit_allocate_cmd(). Signed-off-by: Nicholas Bellinger

iscsi/iser-target: Convert to command priv_size usage

2013-09-09T21:29:21+00:00

This command converts iscsi/isert-target to use allocations based on iscsit_transport->priv_size within iscsit_allocate_cmd(), instead of using an embedded isert_cmd->iscsi_cmd. This includes removing iscsit_transport->alloc_cmd() usage, along with updating isert-target code to use iscsit_priv_cmd(). Also, remove left-over iscsit_transport->release_cmd() usage for direct calls to iscsit_release_cmd(), and drop the now unused lio_cmd_cache and isert_cmd_cache. Cc: Or Gerlitz Cc: Kent Overstreet Signed-off-by: Nicholas Bellinger

iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED

2013-07-08T01:35:56+00:00

This patch addresses a bug where RDMA_CM_EVENT_DISCONNECTED may occur before the connection shutdown has been completed by rx/tx threads, that causes isert_free_conn() to wait indefinately on ->conn_wait. This patch allows isert_disconnect_work code to invoke rdma_disconnect when isert_disconnect_work() process context is started by client session reset before isert_free_conn() code has been reached. It also adds isert_conn->conn_mutex protection for ->state within isert_disconnect_work(), isert_cq_comp_err() and isert_free_conn() code, along with isert_check_state() for wait_event usage. (v2: Add explicit iscsit_cause_connection_reinstatement call during isert_disconnect_work() to force conn reset) Cc: stable@vger.kernel.org # 3.10+ Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger

iscsi-target: Fix iscsit_sequence_cmd reject handling for iser

2013-07-07T04:59:54+00:00

This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd() in order to avoid external iscsit_reject_cmd() reject usage for all PDU types. It also updates PDU specific handlers for traditional iscsi-target code to not reset the session after posting a ISCSI_OP_REJECT during setup. (v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call target_put_sess_cmd() after iscsit_sequence_cmd() failure) Cc: Or Gerlitz Cc: Mike Christie Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger