kernel/linux.git/include/sound, branch linux-6.9.y

ALSA: dmaengine: Synchronize dma channel after drop()

2024-07-25T07:53:32+00:00

[ Upstream commit e8343410ddf08fc36a9b9cc7c51a4e53a262d4c6 ] Sometimes the stream may be stopped due to XRUN events, in which case the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and start the stream again. In these cases, we must wait for the DMA channel to synchronize before marking the stream as prepared for playback, as the DMA channel gets stopped by drop() without any synchronization. Make sure the ALSA core synchronizes the DMA channel by adding a sync_stop() hook. Reviewed-by: Peter Ujfalusi Signed-off-by: Jai Luthra Link: https://lore.kernel.org/r/20240611-asoc_next-v3-1-fcfd84b12164@ti.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: tas2781: Fix wrong loading calibrated data sequence

2024-06-12T09:39:39+00:00

[ Upstream commit b195acf5266d2dee4067f89345c3e6b88d925311 ] Calibrated data will be set to default after loading DSP config params, which will cause speaker protection work abnormally. Reload calibrated data after loading DSP config params. Remove declaration of unused API which load calibrated data in wrong sequence, changed the copyright year and correct file name in license header. Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") Signed-off-by: Shenghao Ding Link: https://msgid.link/r/20240518141546.1742-1-shenghao-ding@ti.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

Merge tag 'asoc-fix-v6.9-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

2024-05-01T16:05:13+00:00

ASoC: Fixes for v6.9 This is much larger than is ideal, partly due to your holiday but also due to several vendors having come in with relatively large fixes at similar times. It's all driver specific stuff. The meson fixes from Jerome fix some rare timing issues with blocking operations happening in triggers, plus the continuous clock support which fixes clocking for some platforms. The SOF series from Peter builds to the fix to avoid spurious resets of ChainDMA which triggered errors in cleanup paths with both PulseAudio and PipeWire, and there's also some simple new debugfs files from Pierre which make support a lot eaiser.

ALSA: emu10k1: use mutex for E-MU FPGA access locking

2024-04-28T09:58:12+00:00

The FPGA access through the GPIO port does not interfere with other sound processor register access, so there is no need to subject it to emu_lock. And after moving all FPGA access out of the interrupt handler, it does not need to be IRQ-safe, either. What's more, attaching the dock causes a firmware upload, which takes several seconds. We really don't want to disable IRQs for this long, and even less also have someone else spin with IRQs disabled waiting for us. Therefore, use a mutex for FPGA access locking. This makes the code somewhat more noisy, as we need to wrap bigger sections into the mutex, as it needs to enclose the spinlocks. The latter has the "side effect" of fixing dock FPGA programming in a corner case: a really badly timed mixer access right between entering FPGA programming mode and uploading the netlist would mess up the protocol. Signed-off-by: Oswald Buddenhagen Signed-off-by: Takashi Iwai Message-ID: <20240428093716.3198666-5-oswald.buddenhagen@gmx.de>

ALSA: emu10k1: move the whole GPIO event handling to the workqueue

2024-04-28T09:58:12+00:00

The actual event processing was already done by workqueue items. We can move the event dispatching there as well, rather than doing it already in the interrupt handler callback. This change has a rather profound "side effect" on the reliability of the FPGA programming: once we enter programming mode, we must not issue any snd_emu1010_fpga_{read,write}() calls until we're done, as these would badly mess up the programming protocol. But exactly that would happen when trying to program the dock, as that triggers GPIO interrupts as a side effect. This is mitigated by deferring the actual interrupt handling, as workqueue items are not re-entrant. To avoid scheduling the dispatcher on non-events, we now explicitly ignore GPIO IRQs triggered by "uninteresting" pins, which happens a lot as a side effect of calling snd_emu1010_fpga_{read,write}(). Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584 Signed-off-by: Oswald Buddenhagen Signed-off-by: Takashi Iwai Message-ID: <20240428093716.3198666-4-oswald.buddenhagen@gmx.de>

ASoC: cs35l56: Prevent overwriting firmware ASP config

2024-04-08T13:10:01+00:00

Only populate the ASP1 config registers in the regmap cache if the ASP DAI is used. This prevents regcache_sync() from overwriting these registers with their defaults when the firmware owns control of these registers. On a SoundWire system the ASP could be owned by the firmware to share reference audio with the firmware on other cs35l56. Or it can be used as a normal codec-codec interface owned by the driver. The driver must not overwrite the registers if the firmware has control of them. The original implementation for this in commit 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") was to still provide defaults for these registers, assuming that if they were never reconfigured from defaults then regcache_sync() would not write them out because they are not dirty. Unfortunately regcache_sync() is not that smart. If the chip has not reset (so the driver has not called regcache_mark_dirty()) a regcache_sync() could write out registers that are not dirty. To avoid accidental overwriting of the ASP registers, they are removed from the table of defaults and instead are populated with defaults only if one of the ASP DAI configuration functions is called. So if the DAI has never been configured, the firmware is assumed to have ownership of these registers, and the regmap cache will not contain any entries for them. Signed-off-by: Richard Fitzgerald Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") Link: https://msgid.link/r/20240408101803.43183-5-rf@opensource.cirrus.com Signed-off-by: Mark Brown

Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

2024-04-05T06:48:12+00:00

ASoC: Fixes for v6.9 A relatively large set of fixes here, the biggest piece of it is a series correcting some problems with the delay reporting for Intel SOF cards but there's a bunch of other things. Everything here is driver specific except for a fix in the core for an issue with sign extension handling volume controls.

ASoC: tas2781: mark dvc_tlv with __maybe_unused

2024-03-29T07:34:38+00:00

Since we put dvc_tlv static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Fix this W=1 build warning: include/sound/tas2781-tlv.h:18:35: warning: 'dvc_tlv' defined but not used [-Wunused-const-variable=] Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202403290354.v0StnRpc-lkp@intel.com/ Fixes: ae065d0ce9e3 ("ALSA: hda/tas2781: remove digital gain kcontrol") Signed-off-by: Gergo Koteles Message-ID: <0e461545a2a6e9b6152985143e50526322e5f76b.1711665731.git.soyer@irl.hu> Signed-off-by: Takashi Iwai

ALSA: hda: Add pplcllpl/u members to hdac_ext_stream

2024-03-25T16:36:05+00:00

The pplcllpl/u can be used to save the Link Connection Linear Link Position register value to be used for compensation of the LLP register value in case the counter is not reset (after pause/resume or stop/start without closing the stream). The LLP can be used along with PPHCLDP to calculate delay caused by the DSP processing for HDA links. Cc: stable@vger.kernel.org # 6.8 Signed-off-by: Peter Ujfalusi Reviewed-by: Kai Vehmanen Reviewed-by: Pierre-Louis Bossart Link: https://msgid.link/r/20240321130814.4412-17-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ALSA: hda: intel-nhlt: add intel_nhlt_ssp_device_type() function

2024-03-22T11:40:46+00:00

Add a helper function intel_nhlt_ssp_device_type() to detect the type of specific SSP port. The result is nhlt_device_type enum type which could be NHLT_DEVICE_BT or NHLT_DEVICE_I2S. Signed-off-by: Brent Lu Reviewed-by: Péter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Bard Liao Signed-off-by: Peter Ujfalusi Signed-off-by: Takashi Iwai Message-ID: <20231127120657.19764-2-peter.ujfalusi@linux.intel.com>