kernel/linux.git/include/sound/sof/ipc4/header.h, branch v6.12.80

ALSA/ASoC: include: clarify Copyright information

2024-05-09T18:26:34+00:00

For some reason a number of files included the "All rights reserved" statement. Good old copy-paste made sure this mistake proliferated. Remove the "All rights reserved" in all Intel-copyright to align with internal guidance. Reviewed-by: Cezary Rojewski Signed-off-by: Pierre-Louis Bossart Reviewed-by: Bard Liao Reviewed-by: Péter Ujfalusi Link: https://lore.kernel.org/r/20240503140359.259762-10-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai

ASoC: SOF: IPC4: synchronize fw_config_params with fw definitions

2023-12-15T12:57:56+00:00

Update fw_config_params in driver. Signed-off-by: Rander Wang Reviewed-by: Péter Ujfalusi Reviewed-by: Ranjani Sridharan Signed-off-by: Bard Liao Link: https://msgid.link/r/20231215083102.3064200-2-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4: Add data struct for module notification message from firmware

2023-11-24T15:38:00+00:00

With the module notification message the information about the notification is provided via the mailbox with the sof_ipc4_notify_module_data struct. It contains the module and instance id of the sender of the notification, the event_id and optionally additional data which is module and event specific. At the same time add definitions to identify ALSA kcontrol change notification. These notifications use standardized event_id, modules must follow this if they support such notifications: upper 16 bit: 0xA15A as a magic identification value lower 16 bit: param_id of the changed control Signed-off-by: Peter Ujfalusi Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20231124150853.18648-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4-mtrace: move debug slot related definitions to header.h

2023-09-19T12:48:45+00:00

The macro definitions of debug slot can be used by gdb, telemetry and mtrace log, so move these definitions to header.h from mtrace. Then these macro definitions can be shared Signed-off-by: Rander Wang Reviewed-by: Péter Ujfalusi Reviewed-by: Kai Vehmanen Reviewed-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20230919092416.4137-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4: Add new message type: SOF_IPC4_GLB_LOAD_LIBRARY_PREPARE

2023-09-15T12:15:33+00:00

On Intel platforms there is a strict order requirement for the DMA programming: DSP side configures the buffer and sets the GEN bit Host side sets the RUN bit. In order to follow this flow, a new global message type has been added to prepare the DSP side of the DMA: host sends LOAD_LIBRARY_PREPARE with the dma_id DSP side sets its buffer and sets the GEN bit Host sets the RUN bit Host sends LOAD_LIBRARY with dma_id and lib_id DSP receives the library data. It is up to the platform code to use the new prepare stage message and how to handle the reply to it from the firmware, which can indicate that the message type is not supported/handled. In this case the kernel should proceed to the LOAD_LIBRARY stage assuming a single stage library loading: host sends LOAD_LIBRARY_PREPARE with the dma_id DSP replies that the message type is not supported/handled Host acknowledges the return code and sets the RUN bit Host sends LOAD_LIBRARY with dma_id and lib_id DSP receives the library data. Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Ranjani Sridharan Reviewed-by: Chao Song Link: https://lore.kernel.org/r/20230915114018.1701-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4: Add macros for chain-dma message bits

2023-03-21T12:13:30+00:00

In the chained DMA mode, the firmware allocates buffers for the host and link DMA, and takes care of copying data between host- and link-DMA buffers in a low-latency thread. This is different to a regular pipeline, no processing is allowed, and the connection between host- and link DMA is handled with a dedicated IPC. This patch exposes the macros needed to create the required IPC messages. Signed-off-by: Jyri Sarha Reviewed-by: Rander Wang Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20230321092654.7292-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4: Add macro to set the core_id in create_pipe message

2023-03-07T13:58:12+00:00

The create pipeline message can carry the target code_id which is set to 0 at the moment. Add macros to set the core_id in the message extension. Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Link: https://lore.kernel.org/r/20230307123556.31328-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4-pcm: Use the PCM stream's pipeline_info during trigger

2023-01-27T12:14:07+00:00

Use the list of pipelines in the PCM stream's pipeline info to trigger the pipelines in the right order. Add a helper for triggering pipelines in batch mode that will be used to trigger multiple pipelines at the same time. Signed-off-by: Ranjani Sridharan Reviewed-by: Libin Yang Reviewed-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20230127120031.10709-12-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: Intel: Add ipc4 library loading implementation

2022-10-21T12:05:07+00:00

On Intel HDA platforms the library loading is done via DMA and an IPC message is also need to be sent to initiate the downloading of the new library. Co-developed-by: Ranjani Sridharan Signed-off-by: Ranjani Sridharan Signed-off-by: Peter Ujfalusi Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Chao Song Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20221020121238.18339-16-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4: Add macro to get core ID from log buffer status message

2022-09-09T17:48:45+00:00

The LOG_BUFFER_STATUS message includes the ID of the core which updated its log buffer. With IPC4 each core logs to a different slot in the debug window. Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Ranjani Sridharan Link: https://lore.kernel.org/r/20220909114332.31393-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown