kernel/linux.git/include/sound/hda_codec.h, branch v5.4.251

ALSA: hda: fix jack detection with Realtek codecs when in D3

2020-10-29T08:57:25+00:00

commit a6e7d0a4bdb02a7a3ffe0b44aaa8842b7efdd056 upstream. In case HDA controller becomes active, but codec is runtime suspended, jack detection is not successful and no interrupt is raised. This has been observed with multiple Realtek codecs and HDA controllers from different vendors. Bug does not occur if both codec and controller are active, or both are in suspend. Bug can be easily hit on desktop systems with no built-in speaker. The problem can be fixed by powering up the codec once after every controller runtime resume. Even if codec goes back to suspend later, the jack detection will continue to work. Add a flag to 'hda_codec' to describe codecs that require this flow from the controller driver. Modify __azx_runtime_resume() to use pm_request_resume() to make the intent clearer. Mark all Realtek codecs with the new forced_resume flag. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209379 Cc: Kailang Yang Co-developed-by: Kai-Heng Feng Signed-off-by: Kai-Heng Feng Signed-off-by: Kai Vehmanen Cc: Link: https://lore.kernel.org/r/20201012102704.794423-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: hda: Skip controller resume if not needed

2020-10-01T11:17:54+00:00

[ Upstream commit c4c8dd6ef807663e42a5f04ea77cd62029eb99fa ] The HD-audio controller does system-suspend and resume operations by directly calling its helpers __azx_runtime_suspend() and __azx_runtime_resume(). However, in general, we don't have to resume always the device fully at the system resume; typically, if a device has been runtime-suspended, we can leave it to runtime resume. Usually for achieving this, the driver would call pm_runtime_force_suspend() and pm_runtime_force_resume() pairs in the system suspend and resume ops. Unfortunately, this doesn't work for the resume path in our case. For handling the jack detection at the system resume, a child codec device may need the (literally) forcibly resume even if it's been runtime-suspended, and for that, the controller device must be also resumed even if it's been suspended. This patch is an attempt to improve the situation. It replaces the direct __azx_runtime_suspend()/_resume() calls with with pm_runtime_force_suspend() and pm_runtime_force_resume() with a slight trick as we've done for the codec side. More exactly: - azx_has_pm_runtime() check is dropped from azx_runtime_suspend() and azx_runtime_resume(), so that it can be properly executed from the system-suspend/resume path - The WAKEEN handling depends on the card's power state now; it's set and cleared only for the runtime-suspend - azx_resume() checks whether any codec may need the forcible resume beforehand. If the forcible resume is required, it does temporary PM refcount up/down for actually triggering the runtime resume. - A new helper function, hda_codec_need_resume(), is introduced for checking whether the codec needs a forcible runtime-resume, and the existing code is rewritten with that. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043 Link: https://lore.kernel.org/r/20200413082034.25166-6-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin

ALSA: hda - Allow runtime PM for controller if component notifier is used

2019-08-27T14:37:50+00:00

Currently we disallow the runtime PM of the HD-audio controller if it's bound with HDMI/DP on Nvidia / AMD unless it's for dGPU. This is for keeping the link up to get the proper notification for ELD hotplug. As explained in the commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU"), this keep-power-up behavior is rather a stop-gap solution until the ELD notification via audio component. And now we finally got the audio component for these graphics drivers via commit ade49db337a9 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI"), so it's time to change. This patch makes HD-audio controller again runtime-suspendable when the device gets bound with audio component in HDMI codec driver. For making it easier to access from the codec driver, move the flag into the common hda_bus object instead of hda_intel flag. Also rename it to keep_power, to indicate the actual meaning. Signed-off-by: Takashi Iwai

ALSA: hda - Don't resume forcibly i915 HDMI/DP codec

2019-07-16T20:46:13+00:00

We apply the codec resume forcibly at system resume callback for updating and syncing the jack detection state that may have changed during sleeping. This is, however, superfluous for the codec like Intel HDMI/DP, where the jack detection is managed via the audio component notification; i.e. the jack state change shall be reported sooner or later from the graphics side at mode change. This patch changes the codec resume callback to avoid the forcible resume conditionally with a new flag, codec->relaxed_resume, for reducing the resume time. The flag is set in the codec probe. Although this doesn't fix the entire bug mentioned in the bugzilla entry below, it's still a good optimization and some improvements are seen. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201901 Cc: Signed-off-by: Takashi Iwai

Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

2019-07-08T12:45:34+00:00

ASoC: Updates for v5.3 This is a very big update, mainly thanks to Morimoto-san's refactoring work and some fairly large new drivers. - Lots more work on moving towards a component based framework from Morimoto-san. - Support for force disconnecting muxes from Jerome Brunet. - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant CX2072X, Realtek RT1011 and RT1308. Signed-off-by: Takashi Iwai

Merge tag 'v5.2-rc6' into asoc-5.3

2019-06-26T11:39:34+00:00

Linux 5.2-rc6

ASoC: Intel: Skylake: Use recommended SDxFMT programming sequence

2019-06-25T14:32:36+00:00

For BXT platforms, the recommended sequence to program the SDxFMT is to first couple the stream, write the format and decouple again. For all other platforms said sequence remains unchanged. To prevent code duplication, IS_BXT (and consequently IS_CFL) macro is relocated to hda_codec.h file so it can be accessed by SKL driver. Signed-off-by: Paweł Harłoziński Signed-off-by: Cezary Rojewski Reviewed-by: Pierre-Louis Bossart Signed-off-by: Mark Brown

ALSA: hda: remove an unused field from struct hda_codec

2019-06-13T09:30:16+00:00

The .jacks field in struct hda_codec is unused and seems to be a duplicate of .jacktbl, remove it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Pierre-Louis Bossart Signed-off-by: Takashi Iwai

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman

ALSA: hda - Serialize codec registrations

2019-02-01T10:30:09+00:00

In the current code, the codec registration may happen both at the codec bind time and the end of the controller probe time. In a rare occasion, they race with each other, leading to Oops due to the still uninitialized card device. This patch introduces a simple flag to prevent the codec registration at the codec bind time as long as the controller probe is going on. The controller probe invokes snd_card_register() that does the whole registration task, and we don't need to register each piece beforehand. Cc: Signed-off-by: Takashi Iwai