kernel/linux.git/include/soc/mscc, branch v5.6.17

net: dsa: ocelot: the MAC table on Felix is twice as large

2020-05-20T06:22:00+00:00

[ Upstream commit 21ce7f3e16fbf89faaf149cfe0f730edfc553914 ] When running 'bridge fdb dump' on Felix, sometimes learnt and static MAC addresses would appear, sometimes they wouldn't. Turns out, the MAC table has 4096 entries on VSC7514 (Ocelot) and 8192 entries on VSC9959 (Felix), so the existing code from the Ocelot common library only dumped half of Felix's MAC table. They are both organized as a 4-way set-associative TCAM, so we just need a single variable indicating the correct number of rows. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge

2020-04-21T07:07:58+00:00

[ Upstream commit 87b0f983f66f23762921129fd35966eddc3f2dae ] To rehash a previous explanation given in commit 1c44ce560b4d ("net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up"), the switch driver operates the in a mode where a single VLAN can be transmitted as untagged on a particular egress port. That is the "native VLAN on trunk port" use case. The configuration for this native VLAN is driven in 2 ways: - Set the egress port rewriter to strip the VLAN tag for the native VID (as it is egress-untagged, after all). - Configure the ingress port to drop untagged and priority-tagged traffic, if there is no native VLAN. The intention of this setting is that a trunk port with no native VLAN should not accept untagged traffic. Since both of the above configurations for the native VLAN should only be done if VLAN awareness is requested, they are actually done from the ocelot_port_vlan_filtering function, after the basic procedure of toggling the VLAN awareness flag of the port. But there's a problem with that simplistic approach: we are trying to juggle with 2 independent variables from a single function: - Native VLAN of the port - its value is held in port->vid. - VLAN awareness state of the port - currently there are some issues here, more on that later*. The actual problem can be seen when enslaving the switch ports to a VLAN filtering bridge: 0. The driver configures a pvid of zero for each port, when in standalone mode. While the bridge configures a default_pvid of 1 for each port that gets added as a slave to it. 1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true. The VLAN-filtering-dependent portion of the native VLAN configuration is done, considering that the native VLAN is 0. 2. The bridge calls ocelot_vlan_add with vid=1, pvid=true, untagged=true. The native VLAN changes to 1 (change which gets propagated to hardware). 3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the VLAN-filtering-dependent portion of the native VLAN configuration, for the new native VLAN of 1. One can notice that after toggling "ip link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0 type bridge vlan_filtering 1", the new native VLAN finally makes it through and untagged traffic finally starts flowing again. But obviously that shouldn't be needed. So it is clear that 2 independent variables need to both re-trigger the native VLAN configuration. So we introduce the second variable as ocelot_port->vlan_aware. *Actually both the DSA Felix driver and the Ocelot driver already had each its own variable: - Ocelot: ocelot_port_private->vlan_aware - Felix: dsa_port->vlan_filtering but the common Ocelot library needs to work with a single, common, variable, so there is some refactoring done to move the vlan_aware property from the private structure into the common ocelot_port structure. Fixes: 97bb69e1e36e ("net: mscc: ocelot: break apart ocelot_vlan_port_apply") Signed-off-by: Vladimir Oltean Reviewed-by: Horatiu Vultur Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: mscc: ocelot: properly account for VLAN header length when setting MRU

2020-03-10T01:58:17+00:00

What the driver writes into MAC_MAXLEN_CFG does not actually represent VLAN_ETH_FRAME_LEN but instead ETH_FRAME_LEN + ETH_FCS_LEN. Yes they are numerically equal, but the difference is important, as the switch treats VLAN-tagged traffic specially and knows to increase the maximum accepted frame size automatically. So it is always wrong to account for VLAN in the MAC_MAXLEN_CFG register. Unconditionally increase the maximum allowed frame size for double-tagged traffic. Accounting for the additional length does not mean that the other VLAN membership checks aren't performed, so there's no harm done. Also, stop abusing the MTU name for configuring the MRU. There is no support for configuring the MRU on an interface at the moment. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Fixes: fa914e9c4d94 ("net: mscc: ocelot: create a helper for changing the port MTU") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: export ANA, DEV and QSYS registers to include/soc/mscc

2020-01-06T07:22:33+00:00

Since the Felix DSA driver is implementing its own PHYLINK instance due to SoC differences, it needs access to the few registers that are common, mainly for flow control. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: make phy_mode a member of the common struct ocelot_port

2020-01-06T07:22:33+00:00

The Ocelot switchdev driver and the Felix DSA one need it for different reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is integrated with the traditional NXP Layerscape PCS design which does not support runtime configuration of SerDes protocol. So it needs to pre-validate the phy-mode from the device tree and prevent PHYLINK from attempting to change it. For this, it needs to cache it in a private variable. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: use skb queue instead of skbs list

2019-11-27T18:53:37+00:00

Convert to use skb queue instead of the list of skbs. The skb queue could provide protection with lock. Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller

net: mscc: ocelot: convert to use ocelot_port_add_txtstamp_skb()

2019-11-21T22:39:02+00:00

Convert to use ocelot_port_add_txtstamp_skb() for adding skbs which require TX timestamp into list. Export it so that DSA Felix driver could reuse it too. Signed-off-by: Yangbo Lu Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: mscc: ocelot: convert to use ocelot_get_txtstamp()

2019-11-21T22:39:02+00:00

The method getting TX timestamp by reading timestamp FIFO and matching skbs list is common for DSA Felix driver too. So move code out of ocelot_board.c, convert to use ocelot_get_txtstamp() function and export it. Signed-off-by: Yangbo Lu Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: mscc: ocelot: export ocelot_hwstamp_get/set functions

2019-11-21T22:39:02+00:00

Export ocelot_hwstamp_get/set functions so that DSA driver is able to reuse them. Signed-off-by: Yangbo Lu Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: mscc: ocelot: publish ocelot_sys.h to include/soc/mscc

2019-11-15T20:32:16+00:00

The Felix DSA driver needs to write to SYS_RAM_INIT_RAM_INIT for its own chip initialization process. Also update the MAINTAINERS file such that the headers exported by the ocelot driver are under the same maintainers' umbrella as the driver itself. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller