kernel/linux.git/include/soc/mscc, branch v5.16.12

net: mscc: ocelot: create a function that replaces an existing VCAP filter

2021-11-26T19:38:20+00:00

VCAP (Versatile Content Aware Processor) is the TCAM-based engine behind tc flower offload on ocelot, among other things. The ingress port mask on which VCAP rules match is present as a bit field in the actual key of the rule. This means that it is possible for a rule to be shared among multiple source ports. When the rule is added one by one on each desired port, that the ingress port mask of the key must be edited and rewritten to hardware. But the API in ocelot_vcap.c does not allow for this. For one thing, ocelot_vcap_filter_add() and ocelot_vcap_filter_del() are not symmetric, because ocelot_vcap_filter_add() works with a preallocated and prepopulated filter and programs it to hardware, and ocelot_vcap_filter_del() does both the job of removing the specified filter from hardware, as well as kfreeing it. That is to say, the only option of editing a filter in place, which is to delete it, modify the structure and add it back, does not work because it results in use-after-free. This patch introduces ocelot_vcap_filter_replace, which trivially reprograms a VCAP entry to hardware, at the exact same index at which it existed before, without modifying any list or allocating any memory. Signed-off-by: Vladimir Oltean Acked-by: Richard Cochran Signed-off-by: Jakub Kicinski

net: mscc: ocelot: serialize access to the MAC table

2021-10-25T11:59:41+00:00

DSA would like to remove the rtnl_lock from its SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE handlers, and the felix driver uses the same MAC table functions as ocelot. This means that the MAC table functions will no longer be implicitly serialized with respect to each other by the rtnl_mutex, we need to add a dedicated lock in ocelot for the non-atomic operations of selecting a MAC table row, reading/writing what we want and polling for completion. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

Revert "Merge branch 'dsa-rtnl'"

2021-10-25T11:59:25+00:00

This reverts commit 965e6b262f48257dbdb51b565ecfd84877a0ab5f, reversing changes made to 4d98bb0d7ec2d0b417df6207b0bafe1868bad9f8.

net: mscc: ocelot: serialize access to the MAC table

2021-10-24T12:47:44+00:00

net: mscc: ocelot: track the port pvid using a pointer

2021-10-21T11:14:29+00:00

Now that we have a list of struct ocelot_bridge_vlan entries, we can rewrite the pvid logic to simply point to one of those structures, instead of having a separate structure with a "bool valid". The NULL pointer will represent the lack of a bridge pvid (not to be confused with the lack of a hardware pvid on the port, that is present at all times). Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: allow a config where all bridge VLANs are egress-untagged

2021-10-21T11:14:29+00:00

At present, the ocelot driver accepts a single egress-untagged bridge VLAN, meaning that this sequence of operations: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 bridge vlan add dev swp0 vid 2 pvid untagged fails because the bridge automatically installs VID 1 as a pvid & untagged VLAN, and vid 2 would be the second untagged VLAN on this port. It is necessary to delete VID 1 before proceeding to add VID 2. This limitation comes from the fact that we operate the port tag, when it has an egress-untagged VID, in the OCELOT_PORT_TAG_NATIVE mode. The ocelot switches do not have full flexibility and can either have one single VID as egress-untagged, or all of them. There are use cases for having all VLANs as egress-untagged as well, and this patch adds support for that. The change rewrites ocelot_port_set_native_vlan() into a more generic ocelot_port_manage_port_tag() function. Because the software bridge's state, transmitted to us via switchdev, can become very complex, we don't attempt to track all possible state transitions, but instead take a more declarative approach and just make ocelot_port_manage_port_tag() figure out which more to operate in: - port is VLAN-unaware: the classified VLAN (internal, unrelated to the 802.1Q header) is not inserted into packets on egress - port is VLAN-aware: - port has tagged VLANs: -> port has no untagged VLAN: set up as pure trunk -> port has one untagged VLAN: set up as trunk port + native VLAN -> port has more than one untagged VLAN: this is an invalid config which is rejected by ocelot_vlan_prepare - port has no tagged VLANs -> set up as pure egress-untagged port We don't keep the number of tagged and untagged VLANs, we just count the structures we keep. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: convert the VLAN masks to a list

2021-10-21T11:14:29+00:00

First and foremost, the driver currently allocates a constant sized 4K * u32 (16KB memory) array for the VLAN masks. However, a typical application might not need so many VLANs, so if we dynamically allocate the memory as needed, we might actually save some space. Secondly, we'll need to keep more advanced bookkeeping of the VLANs we have, notably we'll have to check how many untagged and how many tagged VLANs we have. This will have to stay in a structure, and allocating another 16 KB array for that is again a bit too much. So refactor the bridge VLANs in a linked list of structures. The hook points inside the driver are ocelot_vlan_member_add() and ocelot_vlan_member_del(), which previously used to operate on the ocelot->vlan_mask[vid] array element. ocelot_vlan_member_add() and ocelot_vlan_member_del() used to call ocelot_vlan_member_set() to commit to the ocelot->vlan_mask. Additionally, we had two calls to ocelot_vlan_member_set() from outside those callers, and those were directly from ocelot_vlan_init(). Those calls do not set up bridging service VLANs, instead they: - clear the VLAN table on reset - set the port pvid to the value used by this driver for VLAN-unaware standalone port operation (VID 0) So now, when we have a structure which represents actual bridge VLANs, VID 0 doesn't belong in that structure, since it is not part of the bridging layer. So delete the middle man, ocelot_vlan_member_set(), and let ocelot_vlan_init() call directly ocelot_vlant_set_mask() which forgoes any data structure and writes directly to hardware, which is all that we need. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: add a type definition for REW_TAG_CFG_TAG_CFG

2021-10-21T11:14:29+00:00

This is a cosmetic patch which clarifies what are the port tagging options for Ocelot switches. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-10-14T23:50:14+00:00

tools/testing/selftests/net/ioam6.sh 7b1700e009cc ("selftests: net: modify IOAM tests for undef bits") bf77b1400a56 ("selftests: net: Test for the IOAM encapsulation with IPv6") Signed-off-by: Jakub Kicinski

net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib

2021-10-13T00:35:18+00:00

Michael reported that when using the "ocelot-8021q" tagging protocol, the switch driver module must be manually loaded before the tagging protocol can be loaded/is available. This appears to be the same problem described here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ where due to the fact that DSA tagging protocols make use of symbols exported by the switch drivers, circular dependencies appear and this breaks module autoloading. The ocelot_8021q driver needs the ocelot_can_inject() and ocelot_port_inject_frame() functions from the switch library. Previously the wrong approach was taken to solve that dependency: shims were provided for the case where the ocelot switch library was compiled out, but that turns out to be insufficient, because the dependency when the switch lib _is_ compiled is problematic too. We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as static inline functions, because these access I/O functions like __ocelot_write_ix() which is called by ocelot_write_rix(). Making those static inline basically means exposing the whole guts of the ocelot switch library, not ideal... We already have one tagging protocol driver which calls into the switch driver during xmit but not using any exported symbol: sja1105_defer_xmit. We can do the same thing here: create a kthread worker and one work item per skb, and let the switch driver itself do the register accesses to send the skb, and then consume it. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Reported-by: Michael Walle Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski