kernel/linux.git/include/soc/bcm2835, branch v6.6.132

firmware: raspberrypi: Fix type assignment

2023-01-10T21:44:04+00:00

We silently cast an unsigned int into a __le32 which makes sparse complain. Moreover, we never actually convert endianness between the CPU's and the expected little-endian value. Fix both at once by calling cpu_to_le32(). Fixes: 40c31955e4e9 ("firmware: raspberrypi: Provide a helper to query a clock max rate") Reported-by: kernel test robot Link: https://lore.kernel.org/r/20221116091712.1309651-3-maxime@cerno.tech Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20230102115255.17802-1-maxime@cerno.tech Signed-off-by: Florian Fainelli

firmware: raspberrypi: Provide a helper to query a clock max rate

2022-10-28T11:03:19+00:00

The firmware allows to query for its clocks the operating range of a given clock. We'll need this for some drivers (KMS, in particular) to infer the state of some configuration options, so let's create a function to do so. Acked-by: Stephen Boyd Reviewed-by: Florian Fainelli Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-3-fe9e7ac8b111@cerno.tech Signed-off-by: Maxime Ripard

firmware: raspberrypi: Move the clock IDs to the firmware header

2022-10-28T11:03:19+00:00

We'll need the clock IDs in more drivers than just the clock driver from now on, so let's move them in the firmware header. Reviewed-by: Florian Fainelli Acked-by: Stephen Boyd Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-2-fe9e7ac8b111@cerno.tech Signed-off-by: Maxime Ripard

firmware: raspberrypi: Introduce rpi_firmware_find_node()

2022-10-28T11:03:19+00:00

A significant number of RaspberryPi drivers using the firmware don't have a phandle to it, so end up scanning the device tree to find a node with the firmware compatible. That code is duplicated everywhere, so let's introduce a helper instead. Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-1-fe9e7ac8b111@cerno.tech Signed-off-by: Maxime Ripard

firmware: raspberrypi: Add RPI_FIRMWARE_NOTIFY_DISPLAY_DONE

2022-01-11T12:16:10+00:00

The RPI_FIRMWARE_NOTIFY_DISPLAY_DONE firmware call allows to tell the firmware the kernel is in charge of the display now and the firmware can free whatever resources it was using. Acked-by: Nicolas Saenz Julienne Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20211215095117.176435-2-maxime@cerno.tech

firmware: raspberrypi: Introduce devm_rpi_firmware_get()

2021-03-22T16:59:51+00:00

It'll simplify the firmware handling for most consumers. Suggested-by: Bartosz Golaszewski Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli Reviewed-by: Bartosz Golaszewski

firmware: raspberrypi: Keep count of all consumers

2021-03-22T16:59:51+00:00

When unbinding the firmware device we need to make sure it has no consumers left. Otherwise we'd leave them with a firmware handle pointing at freed memory. Keep a reference count of all consumers and introduce rpi_firmware_put() which will permit automatically decrease the reference count upon unbinding consumer drivers. Suggested-by: Uwe Kleine-König Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli Reviewed-by: Stephen Boyd Reviewed-by: Bartosz Golaszewski

Revert "firmware: raspberrypi: Introduce vl805 init routine"

2020-08-18T11:01:11+00:00

This reverts commit fbbc5ff3f7f9f4cad562e530ae2cf5d8964fe6d3. The vl805 init routine has moved into drivers/reset/reset-raspberrypi.c Reviewed-by: Florian Fainelli Signed-off-by: Nicolas Saenz Julienne Link: https://lore.kernel.org/r/20200629161845.6021-9-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman

firmware: raspberrypi: Introduce vl805 init routine

2020-05-13T09:53:23+00:00

The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that implements xHCI. After a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's co-processor, VideoCore. RPi4's VideoCore OS contains both the non public firmware load logic and the VL805 firmware blob. The function this patch introduces triggers the aforementioned process. Link: https://lore.kernel.org/r/20200505161318.26200-3-nsaenzjulienne@suse.de Tested-by: Stefan Wahren Tested-by: Stefan Wahren Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring

soc: bcm2835: Add notify xHCI reset property

2020-05-13T09:53:23+00:00

The property is needed in order to trigger VL805's firmware load. Note that gap between the property introduced and the previous one is due to the properties not being defined. Link: https://lore.kernel.org/r/20200505161318.26200-2-nsaenzjulienne@suse.de Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Lorenzo Pieralisi Reviewed-by: Florian Fainelli Reviewed-by: Rob Herring