kernel/linux.git/include/scsi, branch v6.12.107

scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race

2026-08-09T18:23:04+00:00

[ Upstream commit 3dbbbf656b850c9c8de05df6ad4a1dfc6ff02845 ] Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path. Fixes: fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") Signed-off-by: Xingui Yang Reviewed-by: John Garry Link: https://patch.msgid.link/20260716081145.3950172-1-yangxingui@huawei.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: core: wake eh reliably when using scsi_schedule_eh

2026-08-03T09:17:04+00:00

[ Upstream commit dccf3b1798b70f94e958b3d00b83010399e6fb05 ] Drivers which use the scsi_schedule_eh function to run the error handler currently risk the error handler thread never waking once all commands are timed out or inactive. There is no enforced memory order between setting the host into error recovery state and counting busy commands. This can result in a race with scsi_dec_host_busy where neither CPU sees both conditions of all commands inactive and the host error state to request waking the error handler. To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will occur after the error state is globally visible and will be seen by any current scsi_dec_host_busy callers. Fixes: 6eb045e092ef ("scsi: core: avoid host-wide host_busy counter for scsi_mq") Signed-off-by: David Jeffery Link: https://patch.msgid.link/20260615174630.11492-1-djeffery@redhat.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: core: Fix error handler encryption support

2026-01-23T10:18:43+00:00

commit 9a49157deeb23581fc5c8189b486340d7343264a upstream. Some low-level drivers (LLD) access block layer crypto fields, such as rq->crypt_keyslot and rq->crypt_ctx within `struct request`, to configure hardware for inline encryption. However, SCSI Error Handling (EH) commands (e.g., TEST UNIT READY, START STOP UNIT) should not involve any encryption setup. To prevent drivers from erroneously applying crypto settings during EH, this patch saves the original values of rq->crypt_keyslot and rq->crypt_ctx before an EH command is prepared via scsi_eh_prep_cmnd(). These fields in the 'struct request' are then set to NULL. The original values are restored in scsi_eh_restore_cmnd() after the EH command completes. This ensures that the block layer crypto context does not leak into EH command execution. Signed-off-by: Brian Kao Link: https://patch.msgid.link/20251218031726.2642834-1-powenkao@google.com Cc: stable@vger.kernel.org Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-09-19T09:28:51+00:00

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc, mpi3mr). There are no user visible core changes and a whole series of minor updates and fixes. The largest core change is probably the simplification of the workqueue allocation path" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (86 commits) scsi: smartpqi: update driver version to 2.1.30-031 scsi: smartpqi: fix volume size updates scsi: smartpqi: fix rare system hang during LUN reset scsi: smartpqi: add new controller PCI IDs scsi: smartpqi: add counter for parity write stream requests scsi: smartpqi: correct stream detection scsi: smartpqi: Add fw log to kdump scsi: bnx2fc: Remove some unused fields in struct bnx2fc_rport scsi: qla2xxx: Remove the unused 'del_list_entry' field in struct fc_port scsi: ufs: core: Remove ufshcd_urgent_bkops() scsi: core: Remove obsoleted declaration for scsi_driverbyte_string() scsi: bnx2i: Remove unused declarations scsi: core: Simplify an alloc_workqueue() invocation scsi: ufs: Simplify alloc*_workqueue() invocation scsi: stex: Simplify an alloc_ordered_workqueue() invocation scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations scsi: snic: Simplify alloc_workqueue() invocations scsi: qedi: Simplify an alloc_workqueue() invocation scsi: qedf: Simplify alloc_workqueue() invocations scsi: myrs: Simplify an alloc_ordered_workqueue() invocation ...

scsi: core: Remove obsoleted declaration for scsi_driverbyte_string()

2024-08-29T01:03:11+00:00

scsi_driverbyte_string() has been unused since commit 54c29086195f ("scsi: core: Drop the now obsolete driver_byte definitions"). Remove it. Signed-off-by: Gaosheng Cui Link: https://lore.kernel.org/r/20240826032005.4007834-1-cuigaosheng1@huawei.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: core: Simplify an alloc_workqueue() invocation

2024-08-23T01:28:57+00:00

Let alloc_workqueue() format the workqueue name. Remove the work_q_name[] member from struct Scsi_Host because it is no longer used by any SCSI driver nor by the SCSI core. Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20240822195944.654691-19-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations

2024-08-23T01:28:57+00:00

Let alloc_workqueue() format the workqueue name instead of calling snprintf() explicitly. Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20240822195944.654691-16-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: fcoe: Simplify alloc_ordered_workqueue() invocations

2024-08-23T01:28:56+00:00

Let alloc_ordered_workqueue() format the workqueue name instead of calling snprintf() explicitly. Reviewed-by: Hannes Reinecke Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20240822195944.654691-7-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: core: Fix the return value of scsi_logical_block_count()

2024-08-17T01:02:06+00:00

scsi_logical_block_count() should return the block count of a given SCSI command. The original implementation ended up shifting twice, leading to an incorrect count being returned. Fix the conversion between bytes and logical blocks. Cc: stable@vger.kernel.org Fixes: 6a20e21ae1e2 ("scsi: core: Add helper to return number of logical blocks in a request") Signed-off-by: Chaotian Jing Link: https://lore.kernel.org/r/20240813053534.7720-1-chaotian.jing@mediatek.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen