kernel/linux.git/include/net, branch v5.15.209

netfilter: nf_queue: hold bridge skb->dev while queued

2026-06-01T15:35:46+00:00

commit e196115ec330a18de415bdb9f5071aa9f08e53ce upstream. br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge master before queueing bridge LOCAL_IN packets. NFQUEUE only holds references on state.in/out and bridge physdevs, so a queued bridge packet can retain a freed bridge master in skb->dev until reinjection. When the verdict is reinjected later, br_netif_receive_skb() re-enters the receive path with skb->dev still pointing at the freed bridge master, triggering a use-after-free. Store skb->dev in the queue entry, hold a reference on it for the queue lifetime, and use the saved device when dropping queued packets during NETDEV_DOWN handling. Fixes: ac2863445686 ("netfilter: bridge: add nf_afinfo to enable queuing to userspace") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Haoze Xie Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

ipv6: rename and move ip6_dst_lookup_tunnel()

2026-06-01T15:35:43+00:00

[ Upstream commit fc47e86dbfb75a864c0c9dd8e78affb6506296bb ] At the moment ip6_dst_lookup_tunnel() is used only by bareudp. Ideally, other UDP tunnel implementations should use it, but to do so the function needs to accept new parameters that are specific for UDP tunnels, such as the ports. Prepare for these changes by renaming the function to udp_tunnel6_dst_lookup() and move it to file net/ipv6/ip6_udp_tunnel.c. This is similar to what already done for IPv4 in commit bf3fcbf7e7a0 ("ipv4: rename and move ip_route_output_tunnel()"). Suggested-by: Guillaume Nault Signed-off-by: Beniamino Galvani Reviewed-by: David Ahern Signed-off-by: David S. Miller Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()") Signed-off-by: Sasha Levin

ipv4: add new arguments to udp_tunnel_dst_lookup()

2026-06-01T15:35:43+00:00

[ Upstream commit 72fc68c6356b663a8763f02d9b0ec773d59a4949 ] We want to make the function more generic so that it can be used by other UDP tunnel implementations such as geneve and vxlan. To do that, add the following arguments: - source and destination UDP port; - ifindex of the output interface, needed by vxlan; - the tos, because in some cases it is not taken from struct ip_tunnel_info (for example, when it's inherited from the inner packet); - the dst cache, because not all tunnel types (e.g. vxlan) want to use the one from struct ip_tunnel_info. With these parameters, the function no longer needs the full struct ip_tunnel_info as argument and we can pass only the relevant part of it (struct ip_tunnel_key). Suggested-by: Guillaume Nault Signed-off-by: Beniamino Galvani Reviewed-by: David Ahern Signed-off-by: David S. Miller Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()") Signed-off-by: Sasha Levin

ipv4: remove "proto" argument from udp_tunnel_dst_lookup()

2026-06-01T15:35:43+00:00

[ Upstream commit 78f3655adcb52412275f282267ee771421731632 ] The function is now UDP-specific, the protocol is always IPPROTO_UDP. Suggested-by: Guillaume Nault Signed-off-by: Beniamino Galvani Reviewed-by: David Ahern Signed-off-by: David S. Miller Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()") Signed-off-by: Sasha Levin

ipv4: rename and move ip_route_output_tunnel()

2026-06-01T15:35:43+00:00

[ Upstream commit bf3fcbf7e7a08015d3b169bad6281b29d45c272d ] At the moment ip_route_output_tunnel() is used only by bareudp. Ideally, other UDP tunnel implementations should use it, but to do so the function needs to accept new parameters that are specific for UDP tunnels, such as the ports. Prepare for these changes by renaming the function to udp_tunnel_dst_lookup() and move it to file net/ipv4/udp_tunnel_core.c. Suggested-by: Guillaume Nault Signed-off-by: Beniamino Galvani Reviewed-by: David Ahern Signed-off-by: David S. Miller Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()") Signed-off-by: Sasha Levin

net: sched: gred/red: remove unused variables in struct red_stats

2026-06-01T15:35:40+00:00

[ Upstream commit 4516c873e3b55856012ddd6db9d4366ce3c60c5d ] The variable "other" in the struct red_stats is not used. Remove it. Signed-off-by: Zhengchao Shao Signed-off-by: Jakub Kicinski Stable-dep-of: a8f5192809ca ("net/sched: sch_red: annotate data-races in red_dump_stats()") Signed-off-by: Sasha Levin

net/sched: sch_pie: annotate data-races in pie_dump_stats()

2026-06-01T15:35:40+00:00

[ Upstream commit 5154561d9b119f781249f8e845fecf059b38b483 ] pie_dump_stats() only runs with RTNL held, reading fields that can be changed in qdisc fast path. Add READ_ONCE()/WRITE_ONCE() annotations. Alternative would be to acquire the qdisc spinlock, but our long-term goal is to make qdisc dump operations lockless as much as we can. tc_pie_xstats fields don't need to be latched atomically, otherwise this bug would have been caught earlier. Fixes: edb09eb17ed8 ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump") Signed-off-by: Eric Dumazet Reviewed-by: Jamal Hadi Salim Link: https://patch.msgid.link/20260421142944.4009941-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

flow_dissector: Add PPPoE dissectors

2026-06-01T15:35:39+00:00

[ Upstream commit 46126db9c86110e5fc1e369b9bb89735ddefdae4 ] Allow to dissect PPPoE specific fields which are: - session ID (16 bits) - ppp protocol (16 bits) - type (16 bits) - this is PPPoE ethertype, for now only ETH_P_PPP_SES is supported, possible ETH_P_PPP_DISC in the future The goal is to make the following TC command possible: # tc filter add dev ens6f0 ingress prio 1 protocol ppp_ses \ flower \ pppoe_sid 12 \ ppp_proto ip \ action drop Note that only PPPoE Session is supported. Signed-off-by: Wojciech Drewek Acked-by: Guillaume Nault Signed-off-by: Tony Nguyen Stable-dep-of: cc1ff87bce1c ("pppoe: drop PFC frames") Signed-off-by: Sasha Levin

flow_dissector: Add number of vlan tags dissector

2026-06-01T15:35:38+00:00

[ Upstream commit 34951fcf26c59e78ae430fba1fce7c08b1871249 ] Our customers in the fiber telecom world have network configurations where they would like to control their traffic according to the number of tags appearing in the packet. For example, TR247 GPON conformance test suite specification mostly talks about untagged, single, double tagged packets and gives lax guidelines on the vlan protocol vs. number of vlan tags. This is different from the common IT networks where 802.1Q and 802.1ad protocols are usually describe single and double tagged packet. GPON configurations that we work with have arbitrary mix the above protocols and number of vlan tags in the packet. The goal is to make the following TC commands possible: tc filter add dev eth1 ingress flower \ num_of_vlans 1 vlan_prio 5 action drop From our logs, we have redirect rules such that: tc filter add dev $GPON ingress flower num_of_vlans $N \ action mirred egress redirect dev $DEV where N can range from 0 to 3 and $DEV is the function of $N. Also there are rules setting skb mark based on the number of vlans: tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \ $P action skbedit mark $M This new dissector allows extracting the number of vlan tags existing in the packet. Signed-off-by: Boris Sukholitko Signed-off-by: David S. Miller Stable-dep-of: cc1ff87bce1c ("pppoe: drop PFC frames") Signed-off-by: Sasha Levin

Bluetooth: hci_core: Fix use-after-free in vhci_flush()

2026-06-01T15:35:09+00:00

[ Upstream commit 1d6123102e9fbedc8d25bf4731da6d513173e49e ] syzbot reported use-after-free in vhci_flush() without repro. [0] >From the splat, a thread close()d a vhci file descriptor while its device was being used by iotcl() on another thread. Once the last fd refcnt is released, vhci_release() calls hci_unregister_dev(), hci_free_dev(), and kfree() for struct vhci_data, which is set to hci_dev->dev->driver_data. The problem is that there is no synchronisation after unlinking hdev from hci_dev_list in hci_unregister_dev(). There might be another thread still accessing the hdev which was fetched before the unlink operation. We can use SRCU for such synchronisation. Let's run hci_dev_reset() under SRCU and wait for its completion in hci_unregister_dev(). Another option would be to restore hci_dev->destruct(), which was removed in commit 587ae086f6e4 ("Bluetooth: Remove unused hci-destruct cb"). However, this would not be a good solution, as we should not run hci_unregister_dev() while there are in-flight ioctl() requests, which could lead to another data-race KCSAN splat. Note that other drivers seem to have the same problem, for exmaple, virtbt_remove(). [0]: BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718 CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 skb_queue_purge include/linux/skbuff.h:3368 [inline] vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69 hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline] hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592 sock_do_ioctl+0xd9/0x300 net/socket.c:1190 sock_ioctl+0x576/0x790 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcf5b98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929 RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009 RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528 Allocated by task 6535: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635 misc_open+0x2bc/0x330 drivers/char/misc.c:161 chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414 do_dentry_open+0xdf0/0x1970 fs/open.c:964 vfs_open+0x3b/0x340 fs/open.c:1094 do_open fs/namei.c:3887 [inline] path_openat+0x2ee5/0x3830 fs/namei.c:4046 do_filp_open+0x1fa/0x410 fs/namei.c:4073 do_sys_openat2+0x121/0x1c0 fs/open.c:1437 do_sys_open fs/open.c:1452 [inline] __do_sys_openat fs/open.c:1468 [inline] __se_sys_openat fs/open.c:1463 [inline] __x64_sys_openat+0x138/0x170 fs/open.c:1463 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6535: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x18e/0x440 mm/slub.c:4842 vhci_release+0xbc/0xd0 drivers/bluetooth/hci_vhci.c:671 __fput+0x44c/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x6ad/0x22e0 kernel/exit.c:955 do_group_exit+0x21c/0x2d0 kernel/exit.c:1104 __do_sys_exit_group kernel/exit.c:1115 [inline] __se_sys_exit_group kernel/exit.c:1113 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1113 x64_sys_call+0x21ba/0x21c0 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ffff88807cb8d800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 88 bytes inside of freed 1024-byte region [ffff88807cb8d800, ffff88807cb8dc00) Fixes: bf18c7118cf8 ("Bluetooth: vhci: Free driver_data on file release") Reported-by: syzbot+2faa4825e556199361f9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f62d64848fc4c7c30cd6 Signed-off-by: Kuniyuki Iwashima Acked-by: Paul Menzel Signed-off-by: Luiz Augusto von Dentz [ Minor context conflict resolved. ] Signed-off-by: Ruohan Lan Signed-off-by: Greg Kroah-Hartman