kernel/linux.git/include/net, branch v4.19.24

ipvlan, l3mdev: fix broken l3s mode wrt local routes

2019-02-06T16:30:06+00:00

[ Upstream commit d5256083f62e2720f75bb3c5a928a0afe47d6bc3 ] While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin, I ran into the issue that while l3 mode is working fine, l3s mode does not have any connectivity to kube-apiserver and hence all pods end up in Error state as well. The ipvlan master device sits on top of a bond device and hostns traffic to kube-apiserver (also running in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573 where the latter is the address of the bond0. While in l3 mode, a curl to https://10.152.183.1:443 or to https://139.178.29.207:37573 works fine from hostns, neither of them do in case of l3s. In the latter only a curl to https://127.0.0.1:37573 appeared to work where for local addresses of bond0 I saw kernel suddenly starting to emit ARP requests to query HW address of bond0 which remained unanswered and neighbor entries in INCOMPLETE state. These ARP requests only happen while in l3s. Debugging this further, I found the issue is that l3s mode is piggy- backing on l3 master device, and in this case local routes are using l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") and 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback"). I found that reverting them back into using the net->loopback_dev fixed ipvlan l3s connectivity and got everything working for the CNI. Now judging from 4fbae7d83c98 ("ipvlan: Introduce l3s mode") and the l3mdev paper in [0] the only sole reason why ipvlan l3s is relying on l3 master device is to get the l3mdev_ip_rcv() receive hook for setting the dst entry of the input route without adding its own ipvlan specific hacks into the receive path, however, any l3 domain semantics beyond just that are breaking l3s operation. Note that ipvlan also has the ability to dynamically switch its internal operation from l3 to l3s for all ports via ipvlan_set_port_mode() at runtime. In any case, l3 vs l3s soley distinguishes itself by 'de-confusing' netfilter through switching skb->dev to ipvlan slave device late in NF_INET_LOCAL_IN before handing the skb to L4. Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which, if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook without any additional l3mdev semantics on top. This should also have minimal impact since dev->priv_flags is already hot in cache. With this set, l3s mode is working fine and I also get things like masquerading pod traffic on the ipvlan master properly working. [0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf Fixes: f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Fixes: 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback") Fixes: 4fbae7d83c98 ("ipvlan: Introduce l3s mode") Signed-off-by: Daniel Borkmann Cc: Mahesh Bandewar Cc: David Ahern Cc: Florian Westphal Cc: Martynas Pumputis Acked-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ipv4: Fix memory leak in network namespace dismantle

2019-01-31T07:14:32+00:00

[ Upstream commit f97f4dd8b3bb9d0993d2491e0f22024c68109184 ] IPv4 routing tables are flushed in two cases: 1. In response to events in the netdev and inetaddr notification chains 2. When a network namespace is being dismantled In both cases only routes associated with a dead nexthop group are flushed. However, a nexthop group will only be marked as dead in case it is populated with actual nexthops using a nexthop device. This is not the case when the route in question is an error route (e.g., 'blackhole', 'unreachable'). Therefore, when a network namespace is being dismantled such routes are not flushed and leaked [1]. To reproduce: # ip netns add blue # ip -n blue route add unreachable 192.0.2.0/24 # ip netns del blue Fix this by not skipping error routes that are not marked with RTNH_F_DEAD when flushing the routing tables. To prevent the flushing of such routes in case #1, add a parameter to fib_table_flush() that indicates if the table is flushed as part of namespace dismantle or not. Note that this problem does not exist in IPv6 since error routes are associated with the loopback device. [1] unreferenced object 0xffff888066650338 (size 56): comm "ip", pid 1206, jiffies 4294786063 (age 26.235s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 b0 1c 62 61 80 88 ff ff ..........ba.... e8 8b a1 64 80 88 ff ff 00 07 00 08 fe 00 00 00 ...d............ backtrace: [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220 [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20 [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380 [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690 [<0000000014f62875>] netlink_sendmsg+0x929/0xe10 [<00000000bac9d967>] sock_sendmsg+0xc8/0x110 [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0 [<000000002e94f880>] __sys_sendmsg+0xf7/0x250 [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610 [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000003a8b605b>] 0xffffffffffffffff unreferenced object 0xffff888061621c88 (size 48): comm "ip", pid 1206, jiffies 4294786063 (age 26.235s) hex dump (first 32 bytes): 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b d8 8e 26 5f 80 88 ff ff kkkkkkkk..&_.... backtrace: [<00000000733609e3>] fib_table_insert+0x978/0x1500 [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220 [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20 [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380 [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690 [<0000000014f62875>] netlink_sendmsg+0x929/0xe10 [<00000000bac9d967>] sock_sendmsg+0xc8/0x110 [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0 [<000000002e94f880>] __sys_sendmsg+0xf7/0x250 [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610 [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000003a8b605b>] 0xffffffffffffffff Fixes: 8cced9eff1d4 ("[NETNS]: Enable routing configuration in non-initial namespace.") Signed-off-by: Ido Schimmel Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

netfilter: nf_conncount: speculative garbage collection on empty lists

2019-01-22T20:40:29+00:00

commit c80f10bc973af2ace6b1414724eeff61eaa71837 upstream. Instead of removing a empty list node that might be reintroduced soon thereafter, tentatively place the empty list node on the list passed to tree_nodes_free(), then re-check if the list is empty again before erasing it from the tree. [ Florian: rebase on top of pending nf_conncount fixes ] Fixes: 5c789e131cbb9 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search") Reviewed-by: Shawn Bohrer Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

netfilter: nf_conncount: merge lookup and add functions

2019-01-22T20:40:29+00:00

commit df4a902509766897f7371fdfa4c3bf8bc321b55d upstream. 'lookup' is always followed by 'add'. Merge both and make the list-walk part of nf_conncount_add(). This also avoids one unneeded unlock/re-lock pair. Extra care needs to be taken in count_tree, as we only hold rcu read lock, i.e. we can only insert to an existing tree node after acquiring its lock and making sure it has a nonzero count. As a zero count should be rare, just fall back to insert_tree() (which acquires tree lock). This issue and its solution were pointed out by Shawn Bohrer during patch review. Reviewed-by: Shawn Bohrer Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

sock: Make sock->sk_stamp thread-safe

2019-01-09T16:38:33+00:00

[ Upstream commit 3a0ed3e9619738067214871e9cb826fa23b2ddb9 ] Al Viro mentioned (Message-ID <20170626041334.GZ10672@ZenIV.linux.org.uk>) that there is probably a race condition lurking in accesses of sk_stamp on 32-bit machines. sock->sk_stamp is of type ktime_t which is always an s64. On a 32 bit architecture, we might run into situations of unsafe access as the access to the field becomes non atomic. Use seqlocks for synchronization. This allows us to avoid using spinlocks for readers as readers do not need mutual exclusion. Another approach to solve this is to require sk_lock for all modifications of the timestamps. The current approach allows for timestamps to have their own lock: sk_stamp_lock. This allows for the patch to not compete with already existing critical sections, and side effects are limited to the paths in the patch. The addition of the new field maintains the data locality optimizations from commit 9115e8cd2a0c ("net: reorganize struct sock for better data locality") Note that all the instances of the sk_stamp accesses are either through the ioctl or the syscall recvmsg. Signed-off-by: Deepa Dinamani Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ip: validate header length on virtual device xmit

2019-01-09T16:38:31+00:00

[ Upstream commit cb9f1b783850b14cbd7f87d061d784a666dfba1f ] KMSAN detected read beyond end of buffer in vti and sit devices when passing truncated packets with PF_PACKET. The issue affects additional ip tunnel devices. Extend commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the inner header") and commit ccfec9e5cb2d ("ip_tunnel: be careful when accessing the inner header"). Move the check to a separate helper and call at the start of each ndo_start_xmit function in net/ipv4 and net/ipv6. Minor changes: - convert dev_kfree_skb to kfree_skb on error path, as dev_kfree_skb calls consume_skb which is not for error paths. - use pskb_network_may_pull even though that is pedantic here, as the same as pskb_may_pull for devices without llheaders. - do not cache ipv6 hdrs if used only once (unsafe across pskb_may_pull, was more relevant to earlier patch) Reported-by: syzbot Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

xfrm_user: fix freeing of xfrm states on acquire

2018-12-29T12:37:58+00:00

commit 4a135e538962cb00a9667c82e7d2b9e4d7cd7177 upstream. Commit 565f0fa902b6 ("xfrm: use a dedicated slab cache for struct xfrm_state") moved xfrm state objects to use their own slab cache. However, it missed to adapt xfrm_user to use this new cache when freeing xfrm states. Fix this by introducing and make use of a new helper for freeing xfrm_state objects. Fixes: 565f0fa902b6 ("xfrm: use a dedicated slab cache for struct xfrm_state") Reported-by: Pan Bian Cc: # v4.18+ Signed-off-by: Mathias Krause Acked-by: Herbert Xu Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman

netfilter: add missing error handling code for register functions

2018-12-17T08:24:36+00:00

[ Upstream commit 584eab291c67894cb17cc87544b9d086228ea70f ] register_{netdevice/inetaddr/inet6addr}_notifier may return an error value, this patch adds the code to handle these error paths. Signed-off-by: Taehee Yoo Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

sctp: kfree_rcu asoc

2018-12-17T08:24:28+00:00

[ Upstream commit fb6df5a6234c38a9c551559506a49a677ac6f07a ] In sctp_hash_transport/sctp_epaddr_lookup_transport, it dereferences a transport's asoc under rcu_read_lock while asoc is freed not after a grace period, which leads to a use-after-free panic. This patch fixes it by calling kfree_rcu to make asoc be freed after a grace period. Note that only the asoc's memory is delayed to free in the patch, it won't cause sk to linger longer. Thanks Neil and Marcelo to make this clear. Fixes: 7fda702f9315 ("sctp: use new rhlist interface on sctp transport rhashtable") Fixes: cd2b70875058 ("sctp: check duplicate node before inserting a new transport") Reported-by: syzbot+0b05d8aa7cb185107483@syzkaller.appspotmail.com Reported-by: syzbot+aad231d51b1923158444@syzkaller.appspotmail.com Suggested-by: Neil Horman Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Acked-by: Neil Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

neighbour: Avoid writing before skb->head in neigh_hh_output()

2018-12-17T08:24:27+00:00

[ Upstream commit e6ac64d4c4d095085d7dd71cbd05704ac99829b2 ] While skb_push() makes the kernel panic if the skb headroom is less than the unaligned hardware header size, it will proceed normally in case we copy more than that because of alignment, and we'll silently corrupt adjacent slabs. In the case fixed by the previous patch, "ipv6: Check available headroom in ip6_xmit() even without options", we end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware header and write 16 bytes, starting 2 bytes before the allocated buffer. Always check we're not writing before skb->head and, if the headroom is not enough, warn and drop the packet. v2: - instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet (Eric Dumazet) - if we avoid the panic, though, we need to explicitly check the headroom before the memcpy(), otherwise we'll have corrupted slabs on a running kernel, after we warn - use __skb_push() instead of skb_push(), as the headroom check is already implemented here explicitly (Eric Dumazet) Signed-off-by: Stefano Brivio Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman