kernel/linux.git/include/net, branch linux-5.11.y

mm: fix struct page layout on 32-bit systems

2021-05-19T08:29:56+00:00

commit 9ddb3c14afba8bc5950ed297f02d4ae05ff35cd1 upstream. 32-bit architectures which expect 8-byte alignment for 8-byte integers and need 64-bit DMA addresses (arm, mips, ppc) had their struct page inadvertently expanded in 2019. When the dma_addr_t was added, it forced the alignment of the union to 8 bytes, which inserted a 4 byte gap between 'flags' and the union. Fix this by storing the dma_addr_t in one or two adjacent unsigned longs. This restores the alignment to that of an unsigned long. We always store the low bits in the first word to prevent the PageTail bit from being inadvertently set on a big endian platform. If that happened, get_user_pages_fast() racing against a page which was freed and reallocated to the page_pool could dereference a bogus compound_head(), which would be hard to trace back to this cause. Link: https://lkml.kernel.org/r/20210510153211.1504886-1-willy@infradead.org Fixes: c25fff7171be ("mm: add dma_addr_t to struct page") Signed-off-by: Matthew Wilcox (Oracle) Acked-by: Ilias Apalodimas Acked-by: Jesper Dangaard Brouer Acked-by: Vlastimil Babka Tested-by: Matteo Croce Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

net: bridge: mcast: fix broken length + header check for MRDv6 Adv.

2021-05-14T08:50:18+00:00

[ Upstream commit 99014088156cd78867d19514a0bc771c4b86b93b ] The IPv6 Multicast Router Advertisements parsing has the following two issues: For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes, assuming MLDv2 Reports with at least one multicast address entry). When ipv6_mc_check_mld_msg() tries to parse an Multicast Router Advertisement its MLD length check will fail - and it will wrongly return -EINVAL, even if we have a valid MRD Advertisement. With the returned -EINVAL the bridge code will assume a broken packet and will wrongly discard it, potentially leading to multicast packet loss towards multicast routers. The second issue is the MRD header parsing in br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header immediately after the IPv6 header (IPv6 next header type). However according to RFC4286, section 2 all MRD messages contain a Router Alert option (just like MLD). So instead there is an IPv6 Hop-by-Hop option for the Router Alert between the IPv6 and ICMPv6 header, again leading to the bridge wrongly discarding Multicast Router Advertisements. To fix these two issues, introduce a new return value -ENODATA to ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop option which is not an MLD but potentially an MRD packet. This also simplifies further parsing in the bridge code, as ipv6_mc_check_mld() already fully checks the ICMPv6 header and hop-by-hop option. These issues were found and fixed with the help of the mrdisc tool (https://github.com/troglobit/mrdisc). Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements") Signed-off-by: Linus Lüssing Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

netfilter: nftables_offload: VLAN id needs host byteorder in flow dissector

2021-05-14T08:50:13+00:00

[ Upstream commit ff4d90a89d3d4d9814e0a2696509a7d495be4163 ] The flow dissector representation expects the VLAN id in host byteorder. Add the NFT_OFFLOAD_F_NETWORK2HOST flag to swap the bytes from nft_cmp. Fixes: a82055af5959 ("netfilter: nft_payload: add VLAN offload support") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: nft_payload: fix C-VLAN offload support

2021-05-14T08:50:13+00:00

[ Upstream commit 14c20643ef9457679cc6934d77adc24296505214 ] - add another struct flow_dissector_key_vlan for C-VLAN - update layer 3 dependency to allow to match on IPv4/IPv6 Fixes: 89d8fd44abfb ("netfilter: nft_payload: add C-VLAN offload support") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

Bluetooth: verify AMP hci_chan before amp_destroy

2021-05-14T08:49:21+00:00

commit 5c4c8c9544099bb9043a10a5318130a943e32fc3 upstream. hci_chan can be created in 2 places: hci_loglink_complete_evt() if it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory, Only AMP hci_chan should be removed by a call to hci_disconn_loglink_complete_evt(). However, the controller might mess up, call that function, and destroy an hci_chan which is not initiated by hci_loglink_complete_evt(). This patch adds a verification that the destroyed hci_chan must have been init'd by hci_loglink_complete_evt(). Example crash call trace: Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe3/0x144 lib/dump_stack.c:118 print_address_description+0x67/0x22a mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report mm/kasan/report.c:412 [inline] kasan_report+0x251/0x28f mm/kasan/report.c:396 hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072 l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877 l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661 l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline] l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline] l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023 l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596 hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline] hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 Allocated by task 38: set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787 kmalloc include/linux/slab.h:515 [inline] kzalloc include/linux/slab.h:709 [inline] hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674 l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062 l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline] l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381 hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404 hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline] hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 Freed by task 1732: set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free mm/kasan/kasan.c:521 [inline] __kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436 slab_free mm/slub.c:3009 [inline] kfree+0x182/0x21e mm/slub.c:3972 hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline] hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 The buggy address belongs to the object at ffff8881d7af9180 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 24 bytes inside of 128-byte region [ffff8881d7af9180, ffff8881d7af9200) The buggy address belongs to the page: page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0 flags: 0x8000000000000200(slab) raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200 raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Signed-off-by: Archie Pusaka Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com Reviewed-by: Alain Michaud Reviewed-by: Abhishek Pandit-Subedi Signed-off-by: Marcel Holtmann Cc: George Kennedy Signed-off-by: Greg Kroah-Hartman

sch_red: fix off-by-one checks in red_check_params()

2021-04-14T06:47:18+00:00

[ Upstream commit 3a87571f0ffc51ba3bf3ecdb6032861d0154b164 ] This fixes following syzbot report: UBSAN: shift-out-of-bounds in ./include/net/red.h:237:23 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 8418 Comm: syz-executor170 Not tainted 5.12.0-rc4-next-20210324-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 red_set_parms include/net/red.h:237 [inline] choke_change.cold+0x3c/0xc8 net/sched/sch_choke.c:414 qdisc_create+0x475/0x12f0 net/sched/sch_api.c:1247 tc_modify_qdisc+0x4c8/0x1a50 net/sched/sch_api.c:1663 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x43f039 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdfa725168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000400488 RCX: 000000000043f039 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 0000000000403020 R08: 0000000000400488 R09: 0000000000400488 R10: 0000000000400488 R11: 0000000000000246 R12: 00000000004030b0 R13: 0000000000000000 R14: 00000000004ac018 R15: 0000000000400488 Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

xfrm: Fix NULL pointer dereference on policy lookup

2021-04-14T06:47:17+00:00

[ Upstream commit b1e3a5607034aa0a481c6f69a6893049406665fb ] When xfrm interfaces are used in combination with namespaces and ESP offload, we get a dst_entry NULL pointer dereference. This is because we don't have a dst_entry attached in the ESP offloading case and we need to do a policy lookup before the namespace transition. Fix this by expicit checking of skb_dst(skb) before accessing it. Fixes: f203b76d78092 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

net: xfrm: Localize sequence counter per network namespace

2021-04-14T06:47:16+00:00

[ Upstream commit e88add19f68191448427a6e4eb059664650a837f ] A sequence counter write section must be serialized or its internal state can get corrupted. The "xfrm_state_hash_generation" seqcount is global, but its write serialization lock (net->xfrm.xfrm_state_lock) is instantiated per network namespace. The write protection is thus insufficient. To provide full protection, localize the sequence counter per network namespace instead. This should be safe as both the seqcount read and write sections access data exclusively within the network namespace. It also lays the foundation for transforming "xfrm_state_hash_generation" data type from seqcount_t to seqcount_LOCKNAME_t in further commits. Fixes: b65e3d7be06f ("xfrm: state: add sequence count to detect hash resizes") Signed-off-by: Ahmed S. Darwish Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

xfrm: Use actual socket sk instead of skb socket for xfrm_output_resume

2021-04-14T06:47:16+00:00

[ Upstream commit 9ab1265d52314fce1b51e8665ea6dbc9ac1a027c ] A situation can occur where the interface bound to the sk is different to the interface bound to the sk attached to the skb. The interface bound to the sk is the correct one however this information is lost inside xfrm_output2 and instead the sk on the skb is used in xfrm_output_resume instead. This assumes that the sk bound interface and the bound interface attached to the sk within the skb are the same which can lead to lookup failures inside ip_route_me_harder resulting in the packet being dropped. We have an l2tp v3 tunnel with ipsec protection. The tunnel is in the global VRF however we have an encapsulated dot1q tunnel interface that is within a different VRF. We also have a mangle rule that marks the packets causing them to be processed inside ip_route_me_harder. Prior to commit 31c70d5956fc ("l2tp: keep original skb ownership") this worked fine as the sk attached to the skb was changed from the dot1q encapsulated interface to the sk for the tunnel which meant the interface bound to the sk and the interface bound to the skb were identical. Commit 46d6c5ae953c ("netfilter: use actual socket sk rather than skb sk when routing harder") fixed some of these issues however a similar problem existed in the xfrm code. Fixes: 31c70d5956fc ("l2tp: keep original skb ownership") Signed-off-by: Evan Nimmo Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

net: sched: fix err handler in tcf_action_init()

2021-04-14T06:47:16+00:00

[ Upstream commit b3650bf76a32380d4d80a3e21b5583e7303f216c ] With recent changes that separated action module load from action initialization tcf_action_init() function error handling code was modified to manually release the loaded modules if loading/initialization of any further action in same batch failed. For the case when all modules successfully loaded and some of the actions were initialized before one of them failed in init handler. In this case for all previous actions the module will be released twice by the error handler: First time by the loop that manually calls module_put() for all ops, and second time by the action destroy code that puts the module after destroying the action. Reproduction: $ sudo tc actions add action simple sdata \"2\" index 2 $ sudo tc actions add action simple sdata \"1\" index 1 \ action simple sdata \"2\" index 2 RTNETLINK answers: File exists We have an error talking to the kernel $ sudo tc actions ls action simple total acts 1 action order 0: Simple <"2"> index 2 ref 1 bind 0 $ sudo tc actions flush action simple $ sudo tc actions ls action simple $ sudo tc actions add action simple sdata \"2\" index 2 Error: Failed to load TC action module. We have an error talking to the kernel $ lsmod | grep simple act_simple 20480 -1 Fix the issue by modifying module reference counting handling in action initialization code: - Get module reference in tcf_idr_create() and put it in tcf_idr_release() instead of taking over the reference held by the caller. - Modify users of tcf_action_init_1() to always release the module reference which they obtain before calling init function instead of assuming that created action takes over the reference. - Finally, modify tcf_action_init_1() to not release the module reference when overwriting existing action as this is no longer necessary since both upper and lower layers obtain and manage their own module references independently. Fixes: d349f9976868 ("net_sched: fix RTNL deadlock again caused by request_module()") Suggested-by: Cong Wang Signed-off-by: Vlad Buslov Signed-off-by: David S. Miller Signed-off-by: Sasha Levin