kernel/linux.git/include/net/udp.h, branch v5.4.206

udp: call udp_encap_enable for v6 sockets when enabling encap

2022-04-15T12:18:01+00:00

commit a4a600dd301ccde6ea239804ec1f19364a39d643 upstream. When enabling encap for a ipv6 socket without udp_encap_needed_key increased, UDP GRO won't work for v4 mapped v6 address packets as sk will be NULL in udp4_gro_receive(). This patch is to enable it by increasing udp_encap_needed_key for v6 sockets in udp_tunnel_encap_enable(), and correspondingly decrease udp_encap_needed_key in udpv6_destroy_sock(). v1->v2: - add udp_encap_disable() and export it. v2->v3: - add the change for rxrpc and bareudp into one patch, as Alex suggested. v3->v4: - move rxrpc part to another patch. Acked-by: Willem de Bruijn Signed-off-by: Xin Long Signed-off-by: Jakub Kicinski Tested-by: Antonio Quartulli Signed-off-by: Greg Kroah-Hartman

net: multicast: calculate csum of looped-back and forwarded packets

2021-11-17T08:48:21+00:00

[ Upstream commit 9122a70a6333705c0c35614ddc51c274ed1d3637 ] During a testing of an user-space application which transmits UDP multicast datagrams and utilizes multicast routing to send the UDP datagrams out of defined network interfaces, I've found a multicast router does not fill-in UDP checksum into locally produced, looped-back and forwarded UDP datagrams, if an original output NIC the datagrams are sent to has UDP TX checksum offload enabled. The datagrams are sent malformed out of the NIC the datagrams have been forwarded to. It is because: 1. If TX checksum offload is enabled on the output NIC, UDP checksum is not calculated by kernel and is not filled into skb data. 2. dev_loopback_xmit(), which is called solely by ip_mc_finish_output(), sets skb->ip_summed = CHECKSUM_UNNECESSARY unconditionally. 3. Since 35fc92a9 ("[NET]: Allow forwarding of ip_summed except CHECKSUM_COMPLETE"), the ip_summed value is preserved during forwarding. 4. If ip_summed != CHECKSUM_PARTIAL, checksum is not calculated during a packet egress. The minimum fix in dev_loopback_xmit(): 1. Preserves skb->ip_summed CHECKSUM_PARTIAL. This is the case when the original output NIC has TX checksum offload enabled. The effects are: a) If the forwarding destination interface supports TX checksum offloading, the NIC driver is responsible to fill-in the checksum. b) If the forwarding destination interface does NOT support TX checksum offloading, checksums are filled-in by kernel before skb is submitted to the NIC driver. c) For local delivery, checksum validation is skipped as in the case of CHECKSUM_UNNECESSARY, thanks to skb_csum_unnecessary(). 2. Translates ip_summed CHECKSUM_NONE to CHECKSUM_UNNECESSARY. It means, for CHECKSUM_NONE, the behavior is unmodified and is there to skip a looped-back packet local delivery checksum validation. Signed-off-by: Cyril Strejc Reviewed-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

udp: document udp_rcv_segment special case for looped packets

2020-05-10T08:31:33+00:00

commit d0208bf4da97f76237300afb83c097de25645de6 upstream. Commit 6cd021a58c18a ("udp: segment looped gso packets correctly") fixes an issue with rare udp gso multicast packets looped onto the receive path. The stable backport makes the narrowest change to target only these packets, when needed. As opposed to, say, expanding __udp_gso_segment, which is harder to reason to be free from unintended side-effects. But the resulting code is hardly self-describing. Document its purpose and rationale. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

udp: segment looped gso packets correctly

2020-02-01T09:34:39+00:00

[ Upstream commit 6cd021a58c18a1731f7e47f83e172c0c302d65e5 ] Multicast and broadcast packets can be looped from egress to ingress pre segmentation with dev_loopback_xmit. That function unconditionally sets ip_summed to CHECKSUM_UNNECESSARY. udp_rcv_segment segments gso packets in the udp rx path. Segmentation usually executes on egress, and does not expect packets of this type. __udp_gso_segment interprets !CHECKSUM_PARTIAL as CHECKSUM_NONE. But the offsets are not correct for gso_make_checksum. UDP GSO packets are of type CHECKSUM_PARTIAL, with their uh->check set to the correct pseudo header checksum. Reset ip_summed to this type. (CHECKSUM_PARTIAL is allowed on ingress, see comments in skbuff.h) Reported-by: syzbot Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection") Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

udp: Remove unlikely() from IS_ERR*() condition

2019-08-31T02:49:37+00:00

"unlikely(IS_ERR_OR_NULL(x))" is excessive. IS_ERR_OR_NULL() already uses unlikely() internally. Signed-off-by: Denis Efremov Cc: "David S. Miller" Cc: Joe Perches Cc: Andrew Morton Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller

Merge tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-05-31T15:34:32+00:00

Pull yet more SPDX updates from Greg KH: "Here is another set of reviewed patches that adds SPDX tags to different kernel files, based on a set of rules that are being used to parse the comments to try to determine that the license of the file is "GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of these matches are included here, a number of "non-obvious" variants of text have been found but those have been postponed for later review and analysis. There is also a patch in here to add the proper SPDX header to a bunch of Kbuild files that we have missed in the past due to new files being added and forgetting that Kbuild uses two different file names for Makefiles. This issue was reported by the Kbuild maintainer. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers" * tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits) treewide: Add SPDX license identifier - Kbuild treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201 ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

udp: Avoid post-GRO UDP checksum recalculation

2019-05-30T18:10:39+00:00

Currently, when resegmenting an unexpected UDP GRO packet, the full UDP checksum will be calculated for every new SKB created by skb_segment() because the netdev features passed in by udp_rcv_segment() lack any information about checksum offload capabilities. Usually, we have no need to perform this calculation again, as 1) The GRO implementation guarantees that any packets making it to the udp_rcv_segment() function had correct checksums, and, more importantly, 2) Upon the successful return of udp_rcv_segment(), we immediately pull the UDP header off and either queue the segment to the socket or hand it off to a new protocol handler. Unless userspace has set the IP_CHECKSUM sockopt to indicate that they want the final checksum values, we can pass the needed netdev feature flags to __skb_gso_segment() to avoid checksumming each segment in skb_segment(). Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection") Cc: Paolo Abeni Cc: Subash Abhinov Kasiviswanathan Signed-off-by: Sean Tranchetti Acked-by: Paolo Abeni Signed-off-by: David S. Miller

datagram: remove rendundant 'peeked' argument

2019-04-08T16:51:54+00:00

After commit a297569fe00a ("net/udp: do not touch skb->peeked unless really needed") the 'peeked' argument of __skb_try_recv_datagram() and friends is always equal to !!'flags & MSG_PEEK'. Since such argument is really a boolean info, and the callers have already 'flags & MSG_PEEK' handy, we can remove it and clean-up the code a bit. Signed-off-by: Paolo Abeni Acked-by: Willem de Bruijn Signed-off-by: David S. Miller

net: Convert protocol error handlers from void to int

2018-11-09T01:13:08+00:00

We'll need this to handle ICMP errors for tunnels without a sending socket (i.e. FoU and GUE). There, we might have to look up different types of IP tunnels, registered as network protocols, before we get a match, so we want this for the error handlers of IPPROTO_IPIP and IPPROTO_IPV6 in both inet_protos and inet6_protos. These error codes will be used in the next patch. For consistency, return sensible error codes in protocol error handlers whenever handlers can't handle errors because, even if valid, they don't match a protocol or any of its states. This has no effect on existing error handling paths. Signed-off-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller