kernel/linux.git/include/net/tcp.h, branch v4.14.45

tcp: clear tp->packets_out when purging write queue

2018-04-29T09:33:13+00:00

Clear tp->packets_out when purging the write queue, otherwise tcp_rearm_rto() mistakenly assumes TCP write queue is not empty. This results in NULL pointer dereference. Also, remove the redundant `tp->packets_out = 0` from tcp_disconnect(), since tcp_disconnect() calls tcp_write_queue_purge(). Fixes: a27fd7a8ed38 (tcp: purge write queue upon RST) Reported-by: Subash Abhinov Kasiviswanathan Reported-by: Sami Farin Tested-by: Sami Farin Signed-off-by: Eric Dumazet Signed-off-by: Soheil Hassas Yeganeh Acked-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: Greg Kroah-Hartman

tcp: reset sk_send_head in tcp_write_queue_purge

2018-03-31T16:10:38+00:00

tcp_write_queue_purge clears all the SKBs in the write queue but does not reset the sk_send_head. As a result, we can have a NULL pointer dereference anywhere that we use tcp_send_head instead of the tcp_write_queue_tail. For example, after a27fd7a8ed38 (tcp: purge write queue upon RST), we can purge the write queue on RST. Prior to 75c119afe14f (tcp: implement rb-tree based retransmit queue), tcp_push will only check tcp_send_head and then accesses tcp_write_queue_tail to send the actual SKB. As a result, it will dereference a NULL pointer. This has been reported twice for 4.14 where we don't have 75c119afe14f: By Timofey Titovets: [ 422.081094] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 [ 422.081254] IP: tcp_push+0x42/0x110 [ 422.081314] PGD 0 P4D 0 [ 422.081364] Oops: 0002 [#1] SMP PTI By Yongjian Xu: BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: tcp_push+0x48/0x120 PGD 80000007ff77b067 P4D 80000007ff77b067 PUD 7fd989067 PMD 0 Oops: 0002 [#18] SMP PTI Modules linked in: tcp_diag inet_diag tcp_bbr sch_fq iTCO_wdt iTCO_vendor_support pcspkr ixgbe mdio i2c_i801 lpc_ich joydev input_leds shpchp e1000e igb dca ptp pps_core hwmon mei_me mei ipmi_si ipmi_msghandler sg ses scsi_transport_sas enclosure ext4 jbd2 mbcache sd_mod ahci libahci megaraid_sas wmi ast ttm dm_mirror dm_region_hash dm_log dm_mod dax CPU: 6 PID: 14156 Comm: [ET_NET 6] Tainted: G D 4.14.26-1.el6.x86_64 #1 Hardware name: LENOVO ThinkServer RD440 /ThinkServer RD440, BIOS A0TS80A 09/22/2014 task: ffff8807d78d8140 task.stack: ffffc9000e944000 RIP: 0010:tcp_push+0x48/0x120 RSP: 0018:ffffc9000e947a88 EFLAGS: 00010246 RAX: 00000000000005b4 RBX: ffff880f7cce9c00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff8807d00f5000 RBP: ffffc9000e947aa8 R08: 0000000000001c84 R09: 0000000000000000 R10: ffff8807d00f5158 R11: 0000000000000000 R12: ffff8807d00f5000 R13: 0000000000000020 R14: 00000000000256d4 R15: 0000000000000000 FS: 00007f5916de9700(0000) GS:ffff88107fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000007f8226004 CR4: 00000000001606e0 Call Trace: tcp_sendmsg_locked+0x33d/0xe50 tcp_sendmsg+0x37/0x60 inet_sendmsg+0x39/0xc0 sock_sendmsg+0x49/0x60 sock_write_iter+0xb6/0x100 do_iter_readv_writev+0xec/0x130 ? rw_verify_area+0x49/0xb0 do_iter_write+0x97/0xd0 vfs_writev+0x7e/0xe0 ? __wake_up_common_lock+0x80/0xa0 ? __fget_light+0x2c/0x70 ? __do_page_fault+0x1e7/0x530 do_writev+0x60/0xf0 ? inet_shutdown+0xac/0x110 SyS_writev+0x10/0x20 do_syscall_64+0x6f/0x140 ? prepare_exit_to_usermode+0x8b/0xa0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x3135ce0c57 RSP: 002b:00007f5916de4b00 EFLAGS: 00000293 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000003135ce0c57 RDX: 0000000000000002 RSI: 00007f5916de4b90 RDI: 000000000000606f RBP: 0000000000000000 R08: 0000000000000000 R09: 00007f5916de8c38 R10: 0000000000000000 R11: 0000000000000293 R12: 00000000000464cc R13: 00007f5916de8c30 R14: 00007f58d8bef080 R15: 0000000000000002 Code: 48 8b 97 60 01 00 00 4c 8d 97 58 01 00 00 41 b9 00 00 00 00 41 89 f3 4c 39 d2 49 0f 44 d1 41 81 e3 00 80 00 00 0f 85 b0 00 00 00 <80> 4a 38 08 44 8b 8f 74 06 00 00 44 89 8f 7c 06 00 00 83 e6 01 RIP: tcp_push+0x48/0x120 RSP: ffffc9000e947a88 CR2: 0000000000000038 ---[ end trace 8d545c2e93515549 ]--- Fixes: a27fd7a8ed38 (tcp: purge write queue upon RST) Reported-by: Timofey Titovets Reported-by: Yongjian Xu Signed-off-by: Eric Dumazet Signed-off-by: Soheil Hassas Yeganeh Tested-by: Yongjian Xu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tcp: invalidate rate samples during SACK reneging

2018-01-02T19:31:09+00:00

[ Upstream commit d4761754b4fb2ef8d9a1e9d121c4bec84e1fe292 ] Mark tcp_sock during a SACK reneging event and invalidate rate samples while marked. Such rate samples may overestimate bw by including packets that were SACKed before reneging. < ack 6001 win 10000 sack 7001:38001 < ack 7001 win 0 sack 8001:38001 // Reneg detected > seq 7001:8001 // RTO, SACK cleared. < ack 38001 win 10000 In above example the rate sample taken after the last ack will count 7001-38001 as delivered while the actual delivery rate likely could be much lower i.e. 7001-8001. This patch adds a new field tcp_sock.sack_reneg and marks it when we declare SACK reneging and entering TCP_CA_Loss, and unmarks it after the last rate sample was taken before moving back to TCP_CA_Open. This patch also invalidates rate samples taken while tcp_sock.is_sack_reneg is set. Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Yousuk Seung Signed-off-by: Neal Cardwell Signed-off-by: Yuchung Cheng Acked-by: Soheil Hassas Yeganeh Acked-by: Eric Dumazet Acked-by: Priyaranjan Jha Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tcp: when scheduling TLP, time of RTO should account for current ACK

2017-12-17T14:07:58+00:00

[ Upstream commit ed66dfaf236c04d414de1d218441296e57fb2bd2 ] Fix the TLP scheduling logic so that when scheduling a TLP probe, we ensure that the estimated time at which an RTO would fire accounts for the fact that ACKs indicating forward progress should push back RTO times. After the following fix: df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed") we had an unintentional behavior change in the following kind of scenario: suppose the RTT variance has been very low recently. Then suppose we send out a flight of N packets and our RTT is 100ms: t=0: send a flight of N packets t=100ms: receive an ACK for N-1 packets The response before df92c8394e6e that was: -> schedule a TLP for now + RTO_interval The response after df92c8394e6e is: -> schedule a TLP for t=0 + RTO_interval Since RTO_interval = srtt + RTT_variance, this means that we have scheduled a TLP timer at a point in the future that only accounts for RTT_variance. If the RTT_variance term is small, this means that the timer fires soon. Before df92c8394e6e this would not happen, because in that code, when we receive an ACK for a prefix of flight, we did: 1) Near the top of tcp_ack(), switch from TLP timer to RTO at write_queue_head->paket_tx_time + RTO_interval: if (icsk->icsk_pending == ICSK_TIME_LOSS_PROBE) tcp_rearm_rto(sk); 2) In tcp_clean_rtx_queue(), update the RTO to now + RTO_interval: if (flag & FLAG_ACKED) { tcp_rearm_rto(sk); 3) In tcp_ack() after tcp_fastretrans_alert() switch from RTO to TLP at now + RTO_interval: if (icsk->icsk_pending == ICSK_TIME_RETRANS) tcp_schedule_loss_probe(sk); In df92c8394e6e we removed that 3-phase dance, and instead directly set the TLP timer once: we set the TLP timer in cases like this to write_queue_head->packet_tx_time + RTO_interval. So if the RTT variance is small, then this means that this is setting the TLP timer to fire quite soon. This means if the ACK for the tail of the flight takes longer than an RTT to arrive (often due to delayed ACKs), then the TLP timer fires too quickly. Fixes: df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed") Signed-off-by: Neal Cardwell Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match()

2017-12-17T14:07:57+00:00

[ Usptream commit b4d1605a8ea608fd7dc45b926a05d75d340bde4b ] After this fix : ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()"), socket lookups happen while skb->cb[] has not been mangled yet by TCP. Fixes: a04a480d4392 ("net: Require exact match for TCP socket lookups if dif is l3mdev") Signed-off-by: David Ahern Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tcp: fix tcp_mtu_probe() vs highest_sack

2017-11-01T12:18:34+00:00

Based on SNMP values provided by Roman, Yuchung made the observation that some crashes in tcp_sacktag_walk() might be caused by MTU probing. Looking at tcp_mtu_probe(), I found that when a new skb was placed in front of the write queue, we were not updating tcp highest sack. If one skb is freed because all its content was copied to the new skb (for MTU probing), then tp->highest_sack could point to a now freed skb. Bad things would then happen, including infinite loops. This patch renames tcp_highest_sack_combine() and uses it from tcp_mtu_probe() to fix the bug. Note that I also removed one test against tp->sacked_out, since we want to replace tp->highest_sack regardless of whatever condition, since keeping a stale pointer to freed skb is a recipe for disaster. Fixes: a47e5a988a57 ("[TCP]: Convert highest_sack to sk_buff to allow direct access") Signed-off-by: Eric Dumazet Reported-by: Alexei Starovoitov Reported-by: Roman Gushchin Reported-by: Oleksandr Natalenko Acked-by: Alexei Starovoitov Acked-by: Neal Cardwell Acked-by: Yuchung Cheng Signed-off-by: David S. Miller

bpf: bpf_compute_data uses incorrect cb structure

2017-10-29T02:18:48+00:00

SK_SKB program types use bpf_compute_data to store the end of the packet data. However, bpf_compute_data assumes the cb is stored in the qdisc layer format. But, for SK_SKB this is the wrong layer of the stack for this type. It happens to work (sort of!) because in most cases nothing happens to be overwritten today. This is very fragile and error prone. Fortunately, we have another hole in tcp_skb_cb we can use so lets put the data_end value there. Note, SK_SKB program types do not use data_meta, they are failed by sk_skb_is_valid_access(). Signed-off-by: John Fastabend Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller

bpf: avoid preempt enable/disable in sockmap using tcp_skb_cb region

2017-10-20T12:01:29+00:00

SK_SKB BPF programs are run from the socket/tcp context but early in the stack before much of the TCP metadata is needed in tcp_skb_cb. So we can use some unused fields to place BPF metadata needed for SK_SKB programs when implementing the redirect function. This allows us to drop the preempt disable logic. It does however require an API change so sk_redirect_map() has been updated to additionally provide ctx_ptr to skb. Note, we do however continue to disable/enable preemption around actual BPF program running to account for map updates. Signed-off-by: John Fastabend Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller

IPv4: early demux can return an error code

2017-10-01T02:55:47+00:00

Currently no error is emitted, but this infrastructure will used by the next patch to allow source address validation for mcast sockets. Since early demux can do a route lookup and an ipv4 route lookup can return an error code this is consistent with the current ipv4 route infrastructure. Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller

tcp: remove two unused functions

2017-09-19T00:26:11+00:00

remove tcp_may_send_now and tcp_snd_test that are no longer used Fixes: 840a3cbe8969 ("tcp: remove forward retransmit feature") Signed-off-by: Yuchung Cheng Signed-off-by: Neal Cardwell Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller