kernel/linux.git/include/net/tc_act, branch v5.15.3

net/sched: act_vlan: Fix modify to allow 0

2021-06-01T23:54:42+00:00

Currently vlan modification action checks existence of vlan priority by comparing it to 0. Therefore it is impossible to modify existing vlan tag to have priority 0. For example, the following tc command will change the vlan id but will not affect vlan priority: tc filter add dev eth1 ingress matchall action vlan modify id 300 \ priority 0 pipe mirred egress redirect dev eth2 The incoming packet on eth1: ethertype 802.1Q (0x8100), vlan 200, p 4, ethertype IPv4 will be changed to: ethertype 802.1Q (0x8100), vlan 300, p 4, ethertype IPv4 although the user has intended to have p == 0. The fix is to add tcfv_push_prio_exists flag to struct tcf_vlan_params and rely on it when deciding to set the priority. Fixes: 45a497f2d149a4a8061c (net/sched: act_vlan: Introduce TCA_VLAN_ACT_MODIFY vlan action) Signed-off-by: Boris Sukholitko Signed-off-by: David S. Miller

net/sched: act_police: add support for packet-per-second policing

2021-03-13T22:18:09+00:00

Allow a policer action to enforce a rate-limit based on packets-per-second, configurable using a packet-per-second rate and burst parameters. e.g. tc filter add dev tap1 parent ffff: u32 match \ u32 0 0 police pkts_rate 3000 pkts_burst 1000 Testing was unable to uncover a performance impact of this change on existing features. Signed-off-by: Baowen Zheng Signed-off-by: Simon Horman Signed-off-by: Louis Peens Signed-off-by: David S. Miller

flow_offload: add support for packet-per-second policing

2021-03-13T22:18:09+00:00

Allow flow_offload API to configure packet-per-second policing using rate and burst parameters. Dummy implementations of tcf_police_rate_pkt_ps() and tcf_police_burst_pkt() are supplied which return 0, the unconfigured state. This is to facilitate splitting the offload, driver, and TC code portion of this feature into separate patches with the aim of providing a logical flow for review. And the implementation of these helpers will be filled out by a follow-up patch. Signed-off-by: Xingfeng Hu Signed-off-by: Simon Horman Signed-off-by: Louis Peens Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-10-15T19:43:21+00:00

Minor conflicts in net/mptcp/protocol.h and tools/testing/selftests/net/Makefile. In both cases code was added on both sides in the same place so just keep both. Signed-off-by: Jakub Kicinski

net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info

2020-10-15T16:10:11+00:00

The access of tcf_tunnel_info() produces the following splat, so fix it by dereferencing the tcf_tunnel_key_params pointer with marker that internal tcfa_liock is held. ============================= WARNING: suspicious RCU usage 5.9.0+ #1 Not tainted ----------------------------- include/net/tc_act/tc_tunnel_key.h:59 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by tc/34839: #0: ffff88828572c2a0 (&p->tcfa_lock){+...}-{2:2}, at: tc_setup_flow_action+0xb3/0x48b5 stack backtrace: CPU: 1 PID: 34839 Comm: tc Not tainted 5.9.0+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x9a/0xd0 tc_setup_flow_action+0x14cb/0x48b5 fl_hw_replace_filter+0x347/0x690 [cls_flower] fl_change+0x2bad/0x4875 [cls_flower] tc_new_tfilter+0xf6f/0x1ba0 rtnetlink_rcv_msg+0x5f2/0x870 netlink_rcv_skb+0x124/0x350 netlink_unicast+0x433/0x700 netlink_sendmsg+0x6f1/0xbd0 sock_sendmsg+0xb0/0xe0 ____sys_sendmsg+0x4fa/0x6d0 ___sys_sendmsg+0x12e/0x1b0 __sys_sendmsg+0xa4/0x120 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f1f8cd4fe57 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffdc1e193b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1f8cd4fe57 RDX: 0000000000000000 RSI: 00007ffdc1e19420 RDI: 0000000000000003 RBP: 000000005f85aafa R08: 0000000000000001 R09: 00007ffdc1e1936c R10: 000000000040522d R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffdc1e1d6f0 R15: 0000000000482420 Fixes: 3ebaf6da0716 ("net: sched: Do not assume RTNL is held in tunnel key action helpers") Fixes: 7a47281439ba ("net: sched: lock action when translating it to flow_action infra") Signed-off-by: Leon Romanovsky Acked-by: Cong Wang Signed-off-by: Jakub Kicinski

net/sched: act_vlan: Add {POP,PUSH}_ETH actions

2020-10-04T00:28:45+00:00

Implement TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH, to respectively pop and push a base Ethernet header at the beginning of a frame. POP_ETH is just a matter of pulling ETH_HLEN bytes. VLAN tags, if any, must be stripped before calling POP_ETH. PUSH_ETH is restricted to skbs with no mac_header, and only the MAC addresses can be configured. The Ethertype is automatically set from skb->protocol. These restrictions ensure that all skb's fields remain consistent, so that this action can't confuse other part of the networking stack (like GSO). Since openvswitch already had these actions, consolidate the code in skbuff.c (like for vlan and mpls push/pop). Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller

net:qos: police action offloading parameter 'burst' change to the original value

2020-06-30T00:33:42+00:00

Since 'tcfp_burst' with TICK factor, driver side always need to recover it to the original value, this patch moves the generic calculation and recover to the 'burst' original value before offloading to device driver. Signed-off-by: Po Liu Acked-by: Vladimir Oltean Signed-off-by: David S. Miller

net: qos: add tc police offloading action with max frame size limit

2020-06-25T05:04:26+00:00

Current police offloading support the 'burst'' and 'rate_bytes_ps'. Some hardware own the capability to limit the frame size. If the frame size larger than the setting, the frame would be dropped. For the police action itself already accept the 'mtu' parameter in tc command. But not extend to tc flower offloading. So extend 'mtu' to tc flower offloading. Signed-off-by: Po Liu Signed-off-by: David S. Miller

net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline

2020-06-16T01:06:52+00:00

Currently, tcf_ct_flow_table_restore_skb is exported by act_ct module, therefore modules using it will have hard-dependency on act_ct and will require loading it all the time. This can lead to an unnecessary overhead on systems that do not use hardware connection tracking action (ct_metadata action) in the first place. To relax the hard-dependency between the modules, we unexport this function and make it a static inline one. Fixes: 30b0cf90c6dd ("net/sched: act_ct: Support restoring conntrack info on skbs") Signed-off-by: Alaa Hleihel Reviewed-by: Roi Dayan Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller

net: schedule: add action gate offloading

2020-05-01T23:08:19+00:00

Add the gate action to the flow action entry. Add the gate parameters to the tc_setup_flow_action() queueing to the entries of flow_action_entry array provide to the driver. Signed-off-by: Po Liu Signed-off-by: David S. Miller