kernel/linux.git/include/net/mana, branch v6.19.11

net: mana: Handle hardware recovery events when probing the device

2025-12-01T21:53:53+00:00

When MANA is being probed, it's possible that hardware is in recovery mode and the device may get GDMA_EQE_HWC_RESET_REQUEST over HWC in the middle of the probe. Detect such condition and go through the recovery service procedure. Signed-off-by: Long Li Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/1764193552-9712-1-git-send-email-longli@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Drop TX skb on post_work_request failure and unmap resources

2025-11-20T04:11:57+00:00

Drop TX packets when posting the work request fails and ensure DMA mappings are always cleaned up. Signed-off-by: Aditya Garg Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/1763464269-10431-3-git-send-email-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Handle SKB if TX SGEs exceed hardware limit

2025-11-20T04:11:57+00:00

The MANA hardware supports a maximum of 30 scatter-gather entries (SGEs) per TX WQE. Exceeding this limit can cause TX failures. Add ndo_features_check() callback to validate SKB layout before transmission. For GSO SKBs that would exceed the hardware SGE limit, clear NETIF_F_GSO_MASK to enforce software segmentation in the stack. Add a fallback in mana_start_xmit() to linearize non-GSO SKBs that still exceed the SGE limit. Also, Add ethtool counter for SKBs linearized Co-developed-by: Dipayaan Roy Signed-off-by: Dipayaan Roy Signed-off-by: Aditya Garg Reviewed-by: Eric Dumazet Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/1763464269-10431-2-git-send-email-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Add standard counter rx_missed_errors

2025-11-18T03:52:30+00:00

Report standard counter stats->rx_missed_errors using hc_rx_discards_no_wqe from the hardware. Add a global workqueue to periodically run mana_query_gf_stats every 2 seconds to get the latest info in eth_stats and define a driver capability flag to notify hardware of the periodic queries. To avoid repeated failures and log flooding, the workqueue is not rescheduled if mana_query_gf_stats fails on HWC timeout error and the stats are reset to 0. Other errors are transient which will not need a VF reset for recovery. Signed-off-by: Erni Sri Satya Vennela Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/1763120599-6331-3-git-send-email-ernis@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Move hardware counter stats from per-port to per-VF context

2025-11-18T03:52:30+00:00

Move hardware counter (HC) statistics from mana_port_context to mana_context to enable sharing stats across multiple network ports on the same MANA VF. Previously, each network port queried hardware counters independently using MANA_QUERY_GF_STAT command (GF = Generic Function stats from GDMA hardware), resulting in redundant queries when multiple ports existed on the same device. Isolate hardware counter stats by introducing mana_ethtool_hc_stats in mana_context and update the code to ensure all stats are properly reported via ethtool -S , maintaining consistency with previous behavior. Signed-off-by: Erni Sri Satya Vennela Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/1763120599-6331-2-git-send-email-ernis@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Support HW link state events

2025-10-31T22:56:53+00:00

Handle the NIC hardware link state events received from the HW channel, then set the proper link state accordingly. And, add a feature bit, GDMA_DRV_CAP_FLAG_1_HW_VPORT_LINK_AWARE, to inform the NIC hardware this handler exists. Our MANA NIC only sends out the link state down/up messages when we need to let the VM rerun DHCP client and change IP address. So, add netif_carrier_on() in the probe(), let the NIC show the right initial state in /sys/class/net/ethX/operstate. Signed-off-by: Haiyang Zhang Link: https://patch.msgid.link/1761770601-16920-1-git-send-email-haiyangz@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.

2025-08-19T12:42:44+00:00

This patch enhances RX buffer handling in the mana driver by allocating pages from a page pool and slicing them into MTU-sized fragments, rather than dedicating a full page per packet. This approach is especially beneficial on systems with large base page sizes like 64KB. Key improvements: - Proper integration of page pool for RX buffer allocations. - MTU-sized buffer slicing to improve memory utilization. - Reduce overall per Rx queue memory footprint. - Automatic fallback to full-page buffers when: * Jumbo frames are enabled (MTU > PAGE_SIZE / 2). * The XDP path is active, to avoid complexities with fragment reuse. Testing on VMs with 64KB pages shows around 200% throughput improvement. Memory efficiency is significantly improved due to reduced wastage in page allocations. Example: We are now able to fit 35 rx buffers in a single 64kb page for MTU size of 1500, instead of 1 rx buffer per page previously. Tested: - iperf3, iperf2, and nttcp benchmarks. - Jumbo frames with MTU 9000. - Native XDP programs (XDP_PASS, XDP_DROP, XDP_TX, XDP_REDIRECT) for testing the XDP path in driver. - Memory leak detection (kmemleak). - Driver load/unload, reboot, and stress scenarios. Reviewed-by: Jacob Keller Reviewed-by: Saurabh Sengar Reviewed-by: Haiyang Zhang Signed-off-by: Dipayaan Roy Link: https://patch.msgid.link/20250814140410.GA22089@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Paolo Abeni

net: mana: Handle Reset Request from MANA NIC

2025-07-02T02:17:53+00:00

Upon receiving the Reset Request, pause the connection and clean up queues, wait for the specified period, then resume the NIC. In the cleanup phase, the HWC is no longer responding, so set hwc_timeout to zero to skip waiting on the response. Signed-off-by: Haiyang Zhang Link: https://patch.msgid.link/1751055983-29760-1-git-send-email-haiyangz@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Handle unsupported HWC commands

2025-06-19T13:13:49+00:00

If any of the HWC commands are not recognized by the underlying hardware, the hardware returns the response header status of -1. Log the information using netdev_info_once to avoid multiple error logs in dmesg. Signed-off-by: Erni Sri Satya Vennela Reviewed-by: Haiyang Zhang Reviewed-by: Shradha Gupta Reviewed-by: Saurabh Singh Sengar Reviewed-by: Dipayaan Roy Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni

net: mana: Add speed support in mana_get_link_ksettings

2025-06-19T13:13:49+00:00

Allow mana ethtool get_link_ksettings operation to report the maximum speed supported by the SKU in mbps. The driver retrieves this information by issuing a HWC command to the hardware via mana_query_link_cfg(), which retrieves the SKU's maximum supported speed. These APIs when invoked on hardware that are older/do not support these APIs, the speed would be reported as UNKNOWN. Before: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: Unknown! Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes After: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 16000Mb/s Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: Erni Sri Satya Vennela Reviewed-by: Haiyang Zhang Reviewed-by: Shradha Gupta Reviewed-by: Saurabh Singh Sengar Reviewed-by: Long Li Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni