kernel/linux.git/include/net/ip.h, branch v4.9.209

inet: protect against too small mtu values.

2019-12-21T09:42:25+00:00

[ Upstream commit 501a90c945103e8627406763dac418f20f3837b2 ] syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vrf: check accept_source_route on the original netdevice

2019-04-17T06:36:45+00:00

[ Upstream commit 8c83f2df9c6578ea4c5b940d8238ad8a41b87e9e ] Configuration check to accept source route IP options should be made on the incoming netdevice when the skb->dev is an l3mdev master. The route lookup for the source route next hop also needs the incoming netdev. v2->v3: - Simplify by passing the original netdevice down the stack (per David Ahern). Signed-off-by: Stephen Suryaputra Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: avoid use IPCB in cipso_v4_error

2019-03-13T21:04:54+00:00

[ Upstream commit 3da1ed7ac398f34fff1694017a07054d69c5f5c5 ] Extract IP options in cipso_v4_error and use __icmp_send. Signed-off-by: Sergey Nazarov Acked-by: Paul Moore Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

inet: frags: remove some helpers

2018-10-18T07:13:24+00:00

Remove sum_frag_mem_limit(), ip_frag_mem() & ip6_frag_mem() Also since we use rhashtable we can bring back the number of fragments in "grep FRAG /proc/net/sockstat /proc/net/sockstat6" that was removed in commit 434d305405ab ("inet: frag: don't account number of fragment queues") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller (cherry picked from commit 6befe4a78b1553edb6eed3a78b4bcd9748526672) Signed-off-by: Greg Kroah-Hartman

ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu

2018-05-30T05:50:36+00:00

[ Upstream commit d52e5a7e7ca49457dd31fc8b42fb7c0d58a31221 ] Prior to the rework of PMTU information storage in commit 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer."), when a PMTU event advertising a PMTU smaller than net.ipv4.route.min_pmtu was received, we would disable setting the DF flag on packets by locking the MTU metric, and set the PMTU to net.ipv4.route.min_pmtu. Since then, we don't disable DF, and set PMTU to net.ipv4.route.min_pmtu, so the intermediate router that has this link with a small MTU will have to drop the packets. This patch reestablishes pre-2.6.39 behavior by splitting rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu. rt_mtu_locked indicates that we shouldn't set the DF bit on that path, and is checked in ip_dont_fragment(). One possible workaround is to set net.ipv4.route.min_pmtu to a value low enough to accommodate the lowest MTU encountered. Fixes: 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer.") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ipv4: igmp: guard against silly MTU values

2018-01-02T19:35:10+00:00

[ Upstream commit b5476022bbada3764609368f03329ca287528dc8 ] IPv4 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in igmp code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv4 minimal MTU. This patch adds missing IPV4_MIN_MTU define, to not abuse ETH_MIN_MTU anymore. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv4: better IP_MAX_MTU enforcement

2017-08-30T08:21:40+00:00

[ Upstream commit c780a049f9bf442314335372c9abc4548bfe3e44 ] While working on yet another syzkaller report, I found that our IP_MAX_MTU enforcements were not properly done. gcc seems to reload dev->mtu for min(dev->mtu, IP_MAX_MTU), and final result can be bigger than IP_MAX_MTU :/ This is a problem because device mtu can be changed on other cpus or threads. While this patch does not fix the issue I am working on, it is probably worth addressing it. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv4: allow local fragmentation in ip_finish_output_gso()

2016-11-03T20:10:26+00:00

Some configurations (e.g. geneve interface with default MTU of 1500 over an ethernet interface with 1500 MTU) result in the transmission of packets that exceed the configured MTU. While this should be considered to be a "bad" configuration, it is still allowed and should not result in the sending of packets that exceed the configured MTU. Fix by dropping the assumption in ip_finish_output_gso() that locally originated gso packets will never need fragmentation. Basic testing using iperf (observing CPU usage and bandwidth) have shown no measurable performance impact for traffic not requiring fragmentation. Fixes: c7ba65d7b649 ("net: ip: push gso skb forwarding handling down the stack") Reported-by: Jan Tluka Signed-off-by: Lance Richardson Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller

udp: fix IP_CHECKSUM handling

2016-10-26T21:33:22+00:00

First bug was added in commit ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv") : Tom missed that ipv4 udp messages could be received on AF_INET6 socket. ip_cmsg_recv(msg, skb) should have been replaced by ip_cmsg_recv_offset(msg, skb, sizeof(struct udphdr)); Then commit e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") forgot to adjust the offsets now UDP headers are pulled before skb are put in receive queue. Fixes: ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv") Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Signed-off-by: Eric Dumazet Cc: Sam Kumar Cc: Willem de Bruijn Tested-by: Willem de Bruijn Signed-off-by: David S. Miller

net: Require exact match for TCP socket lookups if dif is l3mdev

2016-10-17T14:17:05+00:00

Currently, socket lookups for l3mdev (vrf) use cases can match a socket that is bound to a port but not a device (ie., a global socket). If the sysctl tcp_l3mdev_accept is not set this leads to ack packets going out based on the main table even though the packet came in from an L3 domain. The end result is that the connection does not establish creating confusion for users since the service is running and a socket shows in ss output. Fix by requiring an exact dif to sk_bound_dev_if match if the skb came through an interface enslaved to an l3mdev device and the tcp_l3mdev_accept is not set. skb's through an l3mdev interface are marked by setting a flag in inet{6}_skb_parm. The IPv6 variant is already set; this patch adds the flag for IPv4. Using an skb flag avoids a device lookup on the dif. The flag is set in the VRF driver using the IP{6}CB macros. For IPv4, the inet_skb_parm struct is moved in the cb per commit 971f10eca186, so the match function in the TCP stack needs to use TCP_SKB_CB. For IPv6, the move is done after the socket lookup, so IP6CB is used. The flags field in inet_skb_parm struct needs to be increased to add another flag. There is currently a 1-byte hole following the flags, so it can be expanded to u16 without increasing the size of the struct. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: David Ahern Signed-off-by: David S. Miller