kernel/linux.git/include/net/ip.h, branch v4.19.143

inet: protect against too small mtu values.

2019-12-21T09:57:08+00:00

[ Upstream commit 501a90c945103e8627406763dac418f20f3837b2 ] syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vrf: check accept_source_route on the original netdevice

2019-04-17T06:38:42+00:00

[ Upstream commit 8c83f2df9c6578ea4c5b940d8238ad8a41b87e9e ] Configuration check to accept source route IP options should be made on the incoming netdevice when the skb->dev is an l3mdev master. The route lookup for the source route next hop also needs the incoming netdev. v2->v3: - Simplify by passing the original netdevice down the stack (per David Ahern). Signed-off-by: Stephen Suryaputra Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: avoid use IPCB in cipso_v4_error

2019-03-10T06:17:19+00:00

[ Upstream commit 3da1ed7ac398f34fff1694017a07054d69c5f5c5 ] Extract IP options in cipso_v4_error and use __icmp_send. Signed-off-by: Sergey Nazarov Acked-by: Paul Moore Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv4: Add ICMPv6 support when parse route ipproto

2019-03-10T06:17:17+00:00

[ Upstream commit 5e1a99eae84999a2536f50a0beaf5d5262337f40 ] For ip rules, we need to use 'ipproto ipv6-icmp' to match ICMPv6 headers. But for ip -6 route, currently we only support tcp, udp and icmp. Add ICMPv6 support so we can match ipv6-icmp rules for route lookup. v2: As David Ahern and Sabrina Dubroca suggested, Add an argument to rtm_getroute_parse_ip_proto() to handle ICMP/ICMPv6 with different family. Reported-by: Jianlin Shi Fixes: eacb9384a3fe ("ipv6: support sport, dport and ip_proto in RTM_GETROUTE") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ip: remove tx_flags from ipcm_cookie and use same logic for v4 and v6

2018-07-07T01:58:49+00:00

skb_shinfo(skb)->tx_flags is derived from sk->sk_tsflags, possibly after modification by __sock_cmsg_send, by calling sock_tx_timestamp. The IPv4 and IPv6 paths do this conversion differently. In IPv4, the individual protocols that support tx timestamps call this function and store the result in ipc.tx_flags. In IPv6, sock_tx_timestamp is called in __ip6_append_data. There is no need to store both tx_flags and ts_flags in the cookie as one is derived from the other. Convert when setting up the cork and remove the redundant field. This is similar to IPv6, only have the conversion happen only once per datagram, in ip(6)_setup_cork. Also change __ip6_append_data to match __ip_append_data. Only update tskey if timestamping is enabled with OPT_ID. The SOCK_.. test is redundant: only valid protocols can have non-zero cork->tx_flags. After this change the IPv4 and IPv6 logic is the same. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller

ipv4: ipcm_cookie initializers

2018-07-07T01:58:49+00:00

Initialize the cookie in one location to reduce code duplication and avoid bugs from inconsistent initialization, such as that fixed in commit 9887cba19978 ("ip: limit use of gso_size to udp"). Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller

net: ipv4: listified version of ip_rcv

2018-07-04T05:06:20+00:00

Also involved adding a way to run a netfilter hook over a list of packets. Rather than attempting to make netfilter know about lists (which would be a major project in itself) we just let it call the regular okfn (in this case ip_rcv_finish()) for any packets it steals, and have it give us back a list of packets it's synchronously accepted (which normally NF_HOOK would automatically call okfn() on, but we want to be able to potentially pass the list to a listified version of okfn().) The netfilter hooks themselves are indirect calls that still happen per- packet (see nf_hook_entry_hookfn()), but again, changing that can be left for future work. There is potential for out-of-order receives if the netfilter hook ends up synchronously stealing packets, as they will be processed before any accepts earlier in the list. However, it was already possible for an asynchronous accept to cause out-of-order receives, so presumably this is considered OK. Signed-off-by: Edward Cree Signed-off-by: David S. Miller

ipv4: add __ip_queue_xmit() that supports tos param

2018-07-04T02:36:54+00:00

This patch introduces __ip_queue_xmit(), through which the callers can pass tos param into it without having to set inet->tos. For ipv6, ip6_xmit() already allows passing tclass parameter. It's needed when some transport protocol doesn't use inet->tos, like sctp's per transport dscp, which will be added in next patch. Signed-off-by: Xin Long Signed-off-by: David S. Miller

ipv4: support sport, dport and ip_proto in RTM_GETROUTE

2018-05-23T19:14:12+00:00

This is a followup to fib rules sport, dport and ipproto match support. Only supports tcp, udp and icmp for ipproto. Used by fib rule self tests. Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller

udp: generate gso with UDP_SEGMENT

2018-04-26T19:08:04+00:00

Support generic segmentation offload for udp datagrams. Callers can concatenate and send at once the payload of multiple datagrams with the same destination. To set segment size, the caller sets socket option UDP_SEGMENT to the length of each discrete payload. This value must be smaller than or equal to the relevant MTU. A follow-up patch adds cmsg UDP_SEGMENT to specify segment size on a per send call basis. Total byte length may then exceed MTU. If not an exact multiple of segment size, the last segment will be shorter. The implementation adds a gso_size field to the udp socket, ip(v6) cmsg cookie and inet_cork structure to be able to set the value at setsockopt or cmsg time and to work with both lockless and corked paths. Initial benchmark numbers show UDP GSO about as expensive as TCP GSO. tcp tso 3197 MB/s 54232 msg/s 54232 calls/s 6,457,754,262 cycles tcp gso 1765 MB/s 29939 msg/s 29939 calls/s 11,203,021,806 cycles tcp without tso/gso * 739 MB/s 12548 msg/s 12548 calls/s 11,205,483,630 cycles udp 876 MB/s 14873 msg/s 624666 calls/s 11,205,777,429 cycles udp gso 2139 MB/s 36282 msg/s 36282 calls/s 11,204,374,561 cycles [*] after reverting commit 0a6b2a1dc2a2 ("tcp: switch to GSO being always on") Measured total system cycles ('-a') for one core while pinning both the network receive path and benchmark process to that core: perf stat -a -C 12 -e cycles \ ./udpgso_bench_tx -C 12 -4 -D "$DST" -l 4 Note the reduction in calls/s with GSO. Bytes per syscall drops increases from 1470 to 61818. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller